* fix bug where the second press of <TAB> on an empty word (i.e, list
all options) may have resulted in an strncmp() against NULL. (detected
by _DIAGASSERT())
for listings of the current working directory; some ftp servers don't
like `NLST .'.
[noted by Giles Lean <giles@nemeton.com.au>]
* recvrequest(): treat remote=="" as remote==NULL when calling command().
(to support the above change)
* support `[user@]' in `[user@]host' and `[user@]host[:][path]'.
[based on idea (and initial code) from David Maxwell <david@fundy.ca>]
* `idle' may be invoked without any args
* reformat some comments
* reformat usage string in program and man page
* call updateremotepwd() after successful login, not after successful connect
* always call setsockopt(, IPPROTO_IP, IP_TOS, ) (et al); using #if
defined(IPPROTO_IP) doesn't work on certain foreign systems where
enums instead of #defines are used...
[noted by Matthias Pfaller <leo@dachau.marco.de>]
EL_RPROMPT support i added to editline(3).
- allow $FTPPROMPT and $FTPRPROMPT to override defaults for the relevant
prompts
- move `%' formatting code from prompt() to expandbuf().
- implement `%.' and `%c', similar to the same % codes in tcsh(1)
(functionality I added to tcsh nearly 6 years ago), except that `%.'
always does `...trailing' and `%c' always does `/<x>trailing'.
- unknown `%foo' codes get printed as `%foo'
to contain the remote working directory.
- add `set prompt', a user configurable prompt. (defaults to `ftp> ').
the following escape characters a la tcsh(1) are supported: %/, %m,
%M, and %n.
- add global var `username'; used by prompt code
- fix a couple of minor memory leaks
- bump version
- add `usage'; displays the usage of a command.
implemented by calling the c_handler() with argc = 0, argv = "funcname".
- add `passive auto'; does the same as $FTPMODE=auto.
- add `set [option value]'; display all options, or set an option to a value.
- add `unset option'; unset an option.
- add getoptionvalue() to retrieve an option's value, and replace a few
global variables with calls to this.
- implement cleanuppeer(), which resets various bits of state back to
`disconnected'. call in disconnect() and lostpeer().
- support completing on `options'.
- improve recovery after a SIGINT may have closed the connection.
XXX: there's still a couple to fix
other stuff:
- various consistency fixes in the man page.
- ensure that the command usage strings in the code and man page match reality.
- mput/mget: check that the connection still exists before each xfer.
- minor cosmetic changes in confirm().
- set code correctly in sizecmd() and modtime()
- don't need \n in err() strings.
- change lostpeer to take an argument (rather than casting (sig_t)lostpeer
in signal handlers)
- knf and whitespace police.
* simplify main loop (don't need `top' variable any more)
* use a struct sockaddr_in6.sin6_addr for the result from inet_pton(),
rather than u_char buf[16]
* add a few more comments
* confirm(): move from util.c to cmds.c. display mnemonic string in its prompt.
add support for `q' (terminate current xfer), `?' (show help list)
* in various signal handlers, output a linefeed only if fromatty.
* if fgets(stdin) returned NULL (i.e, EOF), clearerr(stdin) because you don't
want future fgets to fail. this is not done for the fgets() in the main
command loop, since ftp will quit at that point.
* unless ftp is invoked with -a, don't retain the anonftp setting between
hosts (`ftp somehost:' sets anonftp, but you don't want that to `stick'
if you close that connection and open a new one).
don't save the signal mask on some foreign systems.
* ensure signal handlers don't use stdio and do reset errno if they
don't exit with siglongjmp()
* use a common SIGINT handler for {send,recv}request()
prints out info if bytes > 0). only set the handler if SIGINFO is defined
* hijack SIGQUIT to be the same as SIGINFO (foreign ports have this, and it's
annoying to have SIGQUIT dump core on netbsd when it prints info on other
systems)
* in {recv,send}request(), factor a lot of duplicated code out into a
`cleanup' section at the end
* rework shell() a bit
the disabled state can be overridden by toggling epsv4.
(I got sick of the errors about EPSV not being supported on almost
every server I connect to. This way we retain support for epsv4, but
it's not so whiny after the first failure...)
to "extern" if it's not set. define GLOBAL to (empty) in main.c.
this effectively moves all the globals into main.c whilst retaining
namespace access to them in other source files.
(global vars in header files confuse foreign linkers)
should be in host order. found/fixed by Matthias Pfaller <leo@dachau.marco.de>
* parse_url(): improve checking of portnum, and add an extra argument to pass
back the parsed portnum to the caller (reduces a bit of code duplication)
* Move the KAME/WIDE copyrights after the BSD/TNFi ones. Since there was
significantly less code added under the former, it's only fair on the latter.
lpage page local files
pdir as dir, but through your $PAGER
pls as ls, but through your $PAGER
* implement docase() (a la dotrans() et al) and use appropriately, rototilling
some duplicated code
* globulize(): modify to return a pointer to the strdup()ed result in all cases,
and hack the code that calls it to take this into account
* replace strcpy() and strncpy() with strlcpy()
* put(), getit(): use some aptly named local vars instead of argv[...]
* delint
prototype for idle() in <unistd.h> (which i thought was against namespace
and sensibility guidelines, but...)
* consistently use xsignal() instead of signal(). we get known behaviour
in all cases (SA_RESTART), which is good for some borken foreign systems.
* remove signal.h from most files; it's unnecessary now
* fetch_url(): use `long chunksize' instead of ssize_t; it's more portable, and
we're setting chunksize with strtol() anyway
* xsignal(): only use SA_RESTART if it exists. SunOS 4.x doesn't have it
but has the inverse (SA_INTERRUPT). the original function i was inspired
from had this support (lib/signal.c, W. Richard Stevens' `UNP 2nd ed Vol 1').
* remove <termios.h> from util.c; it should be unnecessary now
* document the above three commands
* rototill the way the sndbuf and rcvbuf work. remove resetsockbufsize()
* use the appropriate socket buffer size as the size of the buffer that
the read()/write() loops use. speeds up things in some cases.
the an empty directory (e.g, between `some' and `path' in
`ftp://host/some//path'), then execute `CWD ' (without a path).
This command will probably fail on rfc 959 compliant servers, so
issue a warning in this case and bail. [noted by cgd].
(i wonder if the people who wrote rfc 1738 actually realised that this
requirement appears to contravene the spec for `cwd' in rfc 959 ?)
* replace isurl() with isipv6addr(), and use appropriately. fixes
auto-login with `classic ftp URLs' (e.g, `ftp somehost:')
* cleanup and rework some of the ipv6 stuff in parse_url()
* prevent potential coredump in fetch_ftp() when parsing `;type=X'
* KNF a few lines
* fix a couple of comments
* cleanup the man page a bit
this is mainly for (hypothetical) ftp server which disconnect clients
that use EPSV/EPRT. I've never seen any ftp server like this, but
epsv4 command may be of use when such an ftp server is found.
features:
---------
* transfer rate throttling with the new `rate' command. syntax:
rate direction [max [incr]]
where direction is `all', `get' or `put'.
if max is not supplied, the current settings are displayed.
if max is supplied, then transfers in the given direction will
be throttled to this value.
if incr is supplied, the increment for the `on-the-fly' scaling
will be set to that, otherwise `1024' is used.
currently implemented for binary get, binary put, and url fetches.
not yet supported for ascii get or put, or local file copies.
* on-the-fly scaling of the throttle based on signals:
- SIGUSR1 raises the throttle rate by the increment for that direction
- SIGUSR2 lowers the throttle rate by the increment for that direction
* -T dir,max[,incr] option to set rate from the command line
* `k', `m', `g' suffix support for bytecounts in the `hash', `rate',
`rcvbuf' and `sndbuf' commands)
bug fixes and code mods:
------------------------
* fix up ftp_login() so that ruserpass() is always called, even for
command-line url fetches.
* implement strsuftoi(), which parses a given number into a int with
suffix support. replaces getsockbufsize()
* implement parserate(), which does the argv parsing for -T and rate
* save and restore errno in signal handlers (may not be necessary, but
it doesn't hurt)
notes:
------
the rate command has had reasonable testing, but I'd like feedback
if it doesn't do the right thing, especially from people on slower
(i.e, modem) links.
I haven't tested the rate throttle against a http server which does
`transfer-encoding: chunked' because I couldn't find a server to
test against.
NO_PROGRESS. -DSMALL still implies all of those. progress meter support
isn't necessary for the smallest possible ftp client, but it adds very
little space and makes users' lives much better. Therefore, it should
be enabled for installation media if at all possible.
the latter only seemed to work for TIS Gauntlet and not TIS fwtk.
thanks to simonb@netbsd.org for testing this. fixes [bin/5556].
* if EOF (e.g, ^D) is entered at a username/password/account prompt which
happens to use fgets(), exit the login rather than treating EOF as CR.
* don't use the comma operator where separate statements are valid
* always use snprintf to copy stuff into malloced buffers, just in case
typos creep in and mean that the buffer ends up being overflowed
* fix fetch_ftp() so that hcode parsing is not done for file:// urls
(a } in the wrong place, and code at the wrong indent level...)
* change outfile to being a global (so it gets correctly reset)
* change parse_url to not remove leading '/' for non ftp urls.
whilst this is not totally rfc1738 compliant, other code kinda
assumes this is the case, and it doesn't hurt
* parse_url()
- only look for user[:pass] for an ftp url (per rfc1738)
- strip leading /'s in an ftp url. (almost per rfc 1738)
* fetch_url()
- decode a copy of the path and use that to build local filenames
- send port in http Host: header (suggested by cgd@netbsd.org)
* fetch_ftp()
- url_decode() the user, pass and path
- fix splitting of path into dir & file (partially from [bin/7073])
- don't bother caching the last host; it can cause problems when
using ftp:// transfers, or when the user changes between xfers
* improve documentation of auto-fetched url arguments (especially regarding
escape sequences in ftp:// urls)
* some whitespace & copyright updates
this should fix [bin/7073] William O Ferry <woferry@warp.wofme.com>,
as well as the metaissues raised in that PR.
* set setvbuf(ttyout, NULL, _IOLBF, 0) and remove a bunch of fflush(ttyout).
* use fwrite() instead of write() for progressmeter (don't intermix stdio
with non stdio ops)
* fix up progress meter display for files once > ~20.47MB has been
transferred. (noted by darren reed)
* use xsignal() for SIGWINCH, so window resizes don't abort xfers on
drainbamaged systems.
* don't assume that TIOCGWINSZ returns a non zero width.
* support $no_proxy, which is a comma or space separated list of
host[:port] elements for which proxying is to be disabled.
(asked for by cgd in [bin/5027])
* if $FTPANONPASS is defined, use that as the anon ftp password
(instead of "`whoami`@")
* allow http URL's without a filename as long as an output file
is specified.
other stuff:
* implement parse_url(), which breaks up a URL into its bits, and use.
* simplify url_get() and auto_fetch() to use parse_url() and to not
modify the supplied URL or a copy of it.
* implement xmalloc() and xstrdup(); error-checked malloc()/strdup()
* add more consistency to messages, quoting strings in output as `%s'
* default to passive with active fallback. $FTPMODE modifies this behaviour.
-A forces active connection.
* support '-o outfile' for auto-fetched files. outfile can be a file,
`-' (for stdout), or '|command' (to output each file through command).
* support '-r waittime', which retries the connection after waittime seconds
if it fails.
* fix 'page file' when restart is non-zero.
* try all ip-addresses of a host in a http fetch (as the normal ftp fetch
does).
XXX: a ``broken pipe'' error sometimes occurs with -o '|command';
i haven't tracked this down yet.
doesn't use garbage for the username. from "Soren S. Jorvang" <soren@t.dk>
in [bin/4559]
* use in_port_t for ports, and USHRT_MAX instead of 0xffff
(from millert@openbsd.org)
* use `NULL' instead of `(.... *)0' where appropriate.
* don't interpret '-' or '|' when a local filename is determined from
the remote name (i.e, in mget, and in get with only one argument).
This is implemented using an extra argument to recvrequest().
Fixes a major security hole.
* clean up memory leak when using globulize()
* clean up a couple of comments
* fix wording in TNF copyright
features added:
* support for TIS fwtk gate-ftp servers:
* read defaults from $FTPSERVER && $FTPSERVERPORT
* start in gate-ftp mode if invoked as 'gate-ftp'
* toggle or set with 'gate [host [port]]'
* cleanup for WARNS=1 (including some ugly '(void)&var' bits wrapped in
#ifdef __GNUC__ to shut up gcc warnings WRT setjmp/longjmp)
* use strtol() instead of atoi(), and more extensively check result of
conversion
* use u_int16_t instead of short or int for TCP port addresses
* add "more" & "less" as synonyms for "page"
* move editline setup code into controlediting(), and call appropriately.
only setup setup terminal if going into interactive mode. inspired
by Todd Miller <todd.miller@courtesan.com>
lukem