support this feature. This avoids multiple crashes that I've had in the
past. Also ensure that packets are not empty when DIAGNOSTIC is set.
However, this is just another sanity check of the received packets, but
does not address the real problem. The issue seems to be the following:
if the card receives data while doing a reset (vr_init), it later finds
a bunch of empty packets in the receive ring.
This explains the crashes I've hit: running a program which needs
promiscuous mode (dhclient) while the card was already running in
that mode (tcpdump). In this situation, it's easy that the second
reset receives stuff from the network.
Unfortunately, I don't know why the card is producing these packets...
While here, fix a typo in a comment.
Make the transmit section reserve one descriptor for issuing a
command at all times. If either transmit descriptors run out, or
header/buffer software descriptors run out, set IFF_OACTIVE and
get out of ipw_start, rather than re-using a descriptor or trying
to use a NULL descriptor that comes off the front of an empty
descriptor tailqueue.
This ought to fix port-i386/27439 and kern/28683.
- fix a panic in mach64_alloc_screen()
- some cleanup
- restrict mach64_mmap() to addresses which belong to it
- mach64_attach now prints bus addresses instead of kernel vm addresses
- initial support for macppc
(violating the PC Card spec), so... use the "power cycle" socket event to
determine when we've reached Vcc before proceeding, rather than using a fixed
amount of time. This has the double advantage that it makes the card attach
time even shorter on sane systems -- the minimum is now ~38ms on my i8500
rather than 222ms.
Probably a similar change should be made to pcic, but it was hard enough
figuring out whether it would work with pccbb. The chip specs suck.
For now, I'm leaving in a couple of additional printf()s in the hope that I
will get some interesting data from them.
style fixes
* Don't associate a name with the types
* The function type must be declared on a line by itself
preceding the function.
* DO NOT initialize variables in the declarations.
* No parentheses are needed around the return value.
IXP-200 and family motherboard chips. Its functional for both recording and
playback.
Note that quadraphonic and Dolby 5.1 audio are not tested by me but ought
to work fine. I can set the number of channels etc. OK but i can't listen
to the result. Any feedback on this performance would be greatly
apreciated.
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
jmcneill