22869434f2
Bring the new root disk algorithm into shape (minor cleanup, clarify
...
error message) and enable it.
1997-09-28 13:17:41 +00:00
8e9fc838dc
In the OS glue code for the 060SP, replace the copyin()/copyout() glue by
...
movs.
XXX As our CPP seems to hate the 060SP, I couldn't use assym.h for the
PCB_ONFAULT definition, but had to hardwire 64 in the code. This needs
to be fixed ASAP, and will be done in the upcoming reorganization of
the 060sp Makefiles.
1997-09-28 12:57:57 +00:00
4de13c78d3
Use the "proginstall" rule from <bsd.prog.mk> to get the UPDATE
...
behaviour right.
1997-09-28 11:47:29 +00:00
d2cd21c0ef
Fixed typo. in FPU_68882 entry for MVME147
1997-09-28 11:29:48 +00:00
3ad599d701
First part of splitting lpt.c, and the NetBSD/Amiga "supio" frontend. Needs
...
a bit more work to allow an ISA frontend.
1997-09-27 22:44:11 +00:00
da4ac7ec5a
GC setpte*() declarations.
1997-09-27 18:04:47 +00:00
450cdbdaab
Move the "unimplemented software trap" message within `#ifdef DIAGNOSTIC'
...
and use uprintf() for the notification.
1997-09-27 18:03:39 +00:00
70ca0fdc80
Move the per-processor counter register into cpuinfo.
1997-09-27 18:01:30 +00:00
d0b1ee0833
* Optimize pmap_{zero,copy}_page4m() a bit by pre-computing the PTE addresses
...
of the reserved KVAs (vpage[]) used by these routines. This avoids the
context switching in there.
* In pmap_redzone(), remove the first kernel address (at KERNBASE) from
the kernel maps instead of just turning off the PTE `valid' bits.
The latter doesn't create a "red zone" at all, but causes the VM to
allocate a new page if the red zone is touched.
1997-09-27 17:58:03 +00:00
7482ebb584
Insert a hack to allocate IOMMU addresses congruent to the kernel virtual
...
address that being DVMAed to.
1997-09-27 17:49:33 +00:00
8a3aef8a1a
Wait for a keypress after the system is halted and reboot after a key is
...
pressed.
1997-09-27 17:19:38 +00:00
663ab6e406
Most of _machineid->cputype.
1997-09-27 15:52:54 +00:00
e8e12f56dc
Don't use "termios" constants if no "com" devices are configured.
...
Closes PR port-i386/4166 (Chris Jones).
1997-09-27 10:55:48 +00:00
b0f51853ef
conf.h: declare com instead of drcom.
...
conf.c: remove com declarations.
1997-09-27 10:38:10 +00:00
fa6b4a3a7b
add (commented) options BLINK, per PR#4075.
1997-09-27 09:56:25 +00:00
f338821834
Do not set CPUFLG_CACHEPAGETABLES inappropriately on microsparcs
1997-09-26 22:17:23 +00:00
665c7aa080
* Implement a private page table storage allocator for SRMMUs. It provides
...
uncached (if needed) chunks of memory of the two sizes (256 and 1024
bytes) that the SRMMU ever needs.
* Change pmap_changeprot4m() so that is does not rely setpte4m() because
setpte4m() cannot be used for anything other than VAs that are in the
pmap associated with the current context.
In the same vain, make sure that kvm_uncache() switches to context 0.
1997-09-26 22:15:37 +00:00
7b31453c6f
Rearrange the initialization a bit so we have SCBs available in
...
wds_inquire_setup_information(), rather than faking it.
1997-09-26 04:00:09 +00:00
1148723a5f
Set sc_dmat.
1997-09-26 02:50:18 +00:00
a611bcde84
Add another Dayna card to the Apple-compa. list.
...
Define a constant for the SuperMac Spectrum/24 series III display card.
Thanks go to Luca Falzoni <falzoni@jetai.unipv.it> for trying out the
code for the Dayna ethernet support.
1997-09-26 00:37:05 +00:00
fe94e79c57
Add SIOC{ADD|DEL}MULTI ioctl to support (for IFF_MULTICAST).
1997-09-25 13:11:58 +00:00
40f6f7e831
Make the #ifdef expression prior to the declaration and use of
...
"nptesg" match each other, per PR#4024.
1997-09-25 07:31:28 +00:00
d65a5e7fd2
Enter DDB on cntl-alt-esc (a'la i386).
1997-09-25 02:42:47 +00:00
ef86b9a61d
Fix a small oversight in last change.
1997-09-25 02:13:44 +00:00
0c2efd7025
Add a "scrollskip" member to wscons_emulfuncs (XXX even though it's not
...
a function) which specifies how many lines will be skipped when scrolling
up when the bottom of the screen is reached. Dumb framebuffers skip 10
lines (as before) because the copies are s ... l ... o ... w, but it's
silly to skip 10 lines on VGA, since the copies are much faster, so we
only skip one in that case.
1997-09-25 01:31:53 +00:00
76786b38b6
Mimmick the logic used by other drivers to determine if we should use
...
memory-mapped or i/o-mapped access to the device registers, and always
choose memory-mapped if it is enabled. In particular, do _not_ explictly
disable the space we decide to not use, as this confuses some versions
of Alpha console software (which are arguably buggy because of this
problem).
Also, fix a logic error pointed out by Ross Harvey <ross@teraflop.com>
that would cause memory-mapped access to never be enabled.
1997-09-24 22:46:29 +00:00
a2721a0f1b
In vfs_shutdown(), do the "sync and wait for it to finish" _before_
...
unmounting all of the file systems. If we encounter a condition where
all of the dirty buffers could not flush, then don't unmount file systems,
since it might be likely to wedge.
1997-09-24 21:40:55 +00:00
4fbbe844dc
Locore.s cleanup round 1:
...
- MIT syntax to Motorola syntax moveml register lists (for better readability)
- comment alignment
- remove commented out debug or alternate code from early DraCo support
development.
(I wanted to do this stuff for a long time, but always had "more important"
things to do.)
1997-09-24 19:49:08 +00:00
27b993ed37
Add support of SIOCIFMTU to vary mtu of interface. Also allow IFF_MULTICAST
...
on TUNSIFMODE (sometimes you'd like to do IP multicast on tunnel devices).
1997-09-24 19:45:11 +00:00
a2f2e87677
Return the rigth value in the interrupt handler. This change the semantic
...
of wdc_atapi_intr, so we check for ITSDONE rather than the return value for
a pooled command.
1997-09-24 17:00:55 +00:00
56c4befa83
Add an entry for the bus_space_tag in the TC attach argument tables. Fixes
...
PR #4100 .
1997-09-24 02:45:12 +00:00
9769ae9148
Fix error in msgbuf change: add missing '&&'.
1997-09-24 02:20:56 +00:00
5bcefb5bc6
Fix another missed *setregs() change.
1997-09-24 02:15:51 +00:00
3bda138b2b
Fix a missed *setregs() change.
1997-09-24 02:13:11 +00:00
42c325e139
A minor barely acceptable hack to handle having a kernel boot on a system
...
with large amounts of memory and not spew. This doesn't really replace
fixing this problem better later, but it works for now. Basically, if memory
is greater than 128MB, start upping the sizes of some maps.
1997-09-23 23:23:23 +00:00
b23bbbb05c
Redo the platform specific identification and initialization, making
...
it more explicit where platform specific functions (like machine check
handling) should go.
1997-09-23 23:15:42 +00:00
3e5cee3ce5
If the region size turns out to be 0, return an error. This is what will
...
happen if we try to use a mapping register that's not actually defined.
1997-09-23 23:08:47 +00:00
966e96d880
Regen.
1997-09-23 22:36:33 +00:00
d23f3059e5
Add the Ensoniq AudioPCI.
1997-09-23 22:35:48 +00:00
0bd1685aa0
In device_register(), don't check PCI is PCI support isn't configured
...
into the kernel.
Also, some formatting changes to make new root finding code more KNF'ish.
1997-09-23 22:34:00 +00:00
40c87730b3
Move KERNBASE to 0xf0000000.
1997-09-23 19:59:27 +00:00
ea2fc3a36c
Add a missing ( in the pmap_enter call for the message buffer.
1997-09-23 13:48:15 +00:00
f5bb941f5b
MSGBUFSIZE needs no obscure adjustment; initmsgbuf() takes care of that.
1997-09-23 08:23:29 +00:00
c209086562
The symbol `_msgbufaddr' is no longer exported.
1997-09-23 08:19:56 +00:00
9632cb41c6
Fix some lossage resulting from changed message buffer initialization:
...
don't buck the trend and move the call to initmsgbuf() to cpu_startup()
in machdep.c (like most other ports do) where we can setup things right
in one go. (This means that the CSRG copyright will no longer be in
the kernel logs).
1997-09-23 08:16:26 +00:00
3979615b0d
ncr_reg.h -> ncrreg.h per Dave Huang
1997-09-23 02:39:15 +00:00
69fbaa747d
updates from FreeBSD via Dave Huang <khym@bga.com>
1997-09-23 02:27:43 +00:00
4ed600dbd0
Fix several annoyances related to MSS handling in BSD TCP:
...
- Don't overload t_maxseg. Previous behavior was to set it to the min
of the peer's advertised MSS, our advertised MSS, and tcp_mssdflt
(for non-local networks). This breaks PMTU discovery running on
either host. Instead, remember the MSS we advertise, and use it
as appropriate (in silly window avoidance).
- Per last bullet, split tcp_mss() into several functions for handling
MSS (ours and peer's), and performing various tasks when a connection
becomes ESTABLISHED.
- Introduce a new function, tcp_segsize(), which computes the max size
for every segment transmitted in tcp_output(). This will eventually
be used to hook in PMTU discovery.
1997-09-22 21:49:55 +00:00
de572198ad
Implement in_pcbrtentry() - return the route associated with a PCB. If
...
one does not exist, attempt to allocate one. This is mostly pulled from
tcp_input.c.
1997-09-22 21:39:40 +00:00
b562e93fc1
Remove duplicate declaration
1997-09-22 20:35:51 +00:00
676d60fa45
Fix printf formatting; remove extra spaces, add : at the end.
1997-09-22 20:34:45 +00:00
081b0ea365
correct a comment
1997-09-22 15:22:12 +00:00
fb0bc9eeae
Fix (hopefully) the compile errors introduced by the msgbuf changes.
1997-09-22 15:03:58 +00:00
376e3e6e34
Glue in memory_disk_hooks.
1997-09-21 22:53:03 +00:00
585f46558e
Add support for mounting a memory disk as the root device.
1997-09-21 22:51:29 +00:00
c6ff44d7a1
Add support for the memory disk device.
1997-09-21 22:44:46 +00:00
02f4c2f7e9
atari_round_page() -> m68k_round_page(). My fault, sorry...
1997-09-21 20:35:31 +00:00
c588f0b2b7
Add netinet/ip_log.c for ipfilter & ipfilter_log
1997-09-21 18:17:44 +00:00
4508fb4354
Resolve conflicts from the merge of ipf 3.2beta5.
1997-09-21 18:00:54 +00:00
b325cdd771
Build this in ${KERNEL_BUILD_DIRECTORY}/lib/fpsp, similar to libkern.
1997-09-21 17:33:36 +00:00
970af214ab
Deal with HUPCL, closing (but in a different way than proposed) PR 1010.
1997-09-21 17:21:24 +00:00
985ac74a98
Import ip-filter 3.2beta5
1997-09-21 16:47:50 +00:00
3aa9abb4d8
Use the copied-in string to pass to cpu_reboot(), not a pointer into user space.
1997-09-20 19:32:15 +00:00
03a798a3fd
Add some defines for alpha interrupt types.
1997-09-20 19:02:34 +00:00
fca3465b96
Do not skip over a break trap instruction, now that the DDB code can
...
do it properly.
1997-09-20 19:00:40 +00:00
2896e07556
Allow SDOUTSTANDING to be defined elsewhere (e.g., config file).
1997-09-20 18:56:30 +00:00
9b3d64edb9
Remove the `segmap' array from the header. Insert an offset and count
...
field to get to it instead.
Add field `kernbase' so libkvm can be independent of the kernel's link address.
1997-09-20 18:23:51 +00:00
59ed02a11b
pmap_dumpsize() returns a number of disk blocks.
1997-09-20 18:18:33 +00:00
1cd19dc013
Change crash dump layout a bit so the size of the `cpu_kcore' structure
...
does not depend on the value of KERNBASE.
Change pmap_dumpsize() to return disk block units, in stead of pages.
1997-09-20 18:14:01 +00:00
7de20a5b45
Call device_register() on i386 too.
1997-09-20 14:16:43 +00:00
1f1e574146
-implement a "device_register()" function to identify network interfaces
...
by bus type / address (for diskless boot)
-add some (experimental, commented out) code which could be used for
identification of boot disks - should help for BIOS remappings
1997-09-20 14:15:54 +00:00
6c6328cc8f
enable "device_register()" for the i386 too
1997-09-20 14:08:27 +00:00
610abce93b
Copy data passed by the boot loader into an array "bootinfo".
...
The former "cyloffset" argument is used as an (indirect) pointer to the
information structures. "cyloffset" has always been set to zero in the
past, so this should be save to do.
1997-09-20 14:01:26 +00:00
968f26b9d3
-define a buffer for information passed by the bootloader
...
-add a function ("lookup_bootinfo") to extract data
-use passed console information, if present, for console attachment
-arrange definitions for console and KGDB device a bit nicer
1997-09-20 12:51:13 +00:00
b8a47d06da
Define "machdep.booted_kernel" for sysctl.
1997-09-20 12:40:25 +00:00
c03122fcb1
In some future (ie, without COMPAT_OLDBOOT), we don't want to bother
...
with the disk type (IDE or SCSI) here - the BIOS doesn't do it either.
Set "#ifdef"s accordingly.
1997-09-20 12:36:05 +00:00
dc0b04e0ad
Note use of common menu functions and new framework for argument passing
...
to the kernel.
1997-09-20 12:28:21 +00:00
041680f614
don't forget to save the partition number for the kernel
1997-09-20 12:17:41 +00:00
9b4679d869
-Don't pass hardware address, it is not of much use for the kernel.
...
-define "addr" differently for ISA and PCI devices - for PCI, it is
(bus,device,function) now, in the format used by the PCI BIOS
1997-09-20 12:13:01 +00:00
1e11bfa8b7
Move the definition of MSGBUFSIZE up to the machine-arch level if
...
possible. Pointed out by Bernd Ernesti.
1997-09-20 12:12:24 +00:00
2b138578d7
Correct for the extra member in 'struct kern_msgbuf' when calculating
...
the number of bytes we want to allocate.
1997-09-20 12:10:09 +00:00
1d47009a08
Use <machine/bootinfo.h> for definitions shared with the kernel.
1997-09-20 12:10:06 +00:00
ef6f3f7e25
Move the definition of MSGBUFSIZE up to the machine-arch level if
...
possible. Pointed out by Bernd Ernesti.
1997-09-20 12:08:24 +00:00
17b42ff68d
Data structures passed from the boot loader to the kernel.
1997-09-20 12:08:21 +00:00
c5ba7a3102
Move the definition of MSGBUFSIZE up to the machine-arch level if
...
possible. Pointed out by Bernd Ernesti.
1997-09-20 12:06:37 +00:00
2f014c40e6
remove obsolete comment about scsi files
...
don't include ppp_bsdcomp or ppp_deflate support unless ppp defined
alphabetize (mostly) file list
1997-09-20 02:20:52 +00:00
64edd9d48a
Use TAB instead of SPACE to indent. Line up if possible.
1997-09-20 01:02:29 +00:00
8a45521059
Convert RTC_OFFSET, DEVPAGER, SWAPPAGER and VNODEPAGER to be declared
...
by defopt.
1997-09-20 00:44:05 +00:00
e8733ec0da
mark scsipi_make_xs() as potentially unused, so that this can be
...
compiled with -Wunused without optimization/inlining enabled.
Also, make it a little bit closer to KNF.
1997-09-19 23:53:33 +00:00
185cbcebd0
An oops- MSS3 referred to a device not yet integrated.
1997-09-19 22:03:59 +00:00
4de790f125
Add in a clause ifdef'd for LIMITMEM- limit usage of memory to a certain
...
amount. Temporary until more drivers use busdma stuff.
Also correct to unsigned the printing out of memory sizes.
1997-09-19 22:00:34 +00:00
206b183a48
Add a config file for large memory 8200s- this is temporary until a
...
more gracious self correcting (for large memory, e.g., > 1GB) startup happens.
1997-09-19 21:58:47 +00:00
4e51e62639
implement IBCS2_FIONBIO
...
(code by Christos Zoulas; tested by me)
1997-09-19 21:57:10 +00:00
e0f973ee3b
Implement the kernel part of pr-1891. This allows for a more flexible sized
...
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
1997-09-19 19:14:20 +00:00
0fb787aedb
Add missing reference.
1997-09-19 14:48:59 +00:00
f3d890d1c9
missing cast.
1997-09-19 14:47:33 +00:00
38ea6714c9
New microcode release (1.02) from qlogic for the 2100.
1997-09-19 14:15:54 +00:00
4be590238f
Another couple NOMODESENSE drives.
1997-09-19 14:08:48 +00:00
d4713d24c2
Implement the kernel part of pr-1891. This allows for a more flexible sized
...
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
1997-09-19 13:52:37 +00:00
24cbd68d21
Enable the 800x600 Super72 display mode in the generic kernel.
1997-09-19 03:30:41 +00:00
a07bb333b1
Add an 800x600 Super72 mode; started by Neil Clark and finished by me.
...
NOTE: due to hardware requirement of the AGA chipset, the framebuffer width
has to be a multiple of 64 bits. An 800x600 display will use a memory width
of 832 bits, which the current X server can't handle. To get a usable
display, the width needs to be 832 or 768.
1997-09-19 03:27:10 +00:00
82625dc61e
Cosmetic Changes; make coding style closer to other part of this file.
...
(This version is identical with version 1.109 except whitespace changes.)
1997-09-19 01:17:37 +00:00
a0c4d0c2e6
Add new ioctl OSCIOCREPROBE and OSCIOCIDENTIFY to support binary
...
compatibility with NetBSD 1.2.
1997-09-19 00:59:49 +00:00
618f6b9541
Make IDE work again, from Ross Harvey <ross@teraflop.com>.
1997-09-19 00:59:38 +00:00
acdc8c898c
Add new ioctl OSCIOCREPROBE and OSCIOCIDENTIFY to support binary
...
compatibility with NetBSD 1.2.
1997-09-19 00:58:44 +00:00
f5c0dfebd6
Use ${CC} instead of cc and don't explicitly set AR and LD unless they are
...
unset.
1997-09-18 22:55:56 +00:00
bb3e7cdb98
Fix viking/MXCC botch similar to pmap.c.
1997-09-18 20:44:43 +00:00
ef73834bdc
Check for the `VIKING_PCR_TC' being set, just in case. If it isn't set,
...
delay the use of the `CPUFLG_CACHEPAGETABLES' flag.
1997-09-18 20:29:15 +00:00
eac8e745a7
Add a function to stop sun4m counters and call it early during
...
auto-configuration.
1997-09-18 20:25:34 +00:00
9d1afc6f01
Fix a botch in reservemon4m() causing the `Alternate cacheability' not being
...
set on viking MXCC machines while using transparent memory access mode. This
becomes apparent when booting on multi-processor viking machines.
While I'm here, arrange to tempt fate a little less by using `AC' mode
for the shortest possible periods of time.
Special thanks to Matt Ragan for running my test kernels.
1997-09-18 20:16:45 +00:00
c95e55b9ec
Read the received data register before clearing the RBF interrupt. Clearing
...
RBF appears to also clear the OVRUN bit in the receive data, resulting in
the loss of of overflow status.
1997-09-18 03:53:12 +00:00
0d05b5c280
Use the buffer length passed as a parameter to vmapbuf() and vunmapbuf()
...
instead of bp->b_bcount. The I/O operation may have changed bp->b_bcount,
and not all of the kernel virtual memory will be freed. This will result
in the VM system putting pages back on the free list which are still
mapped. This may cause a deadlock later trying to enter pages into
the kernel pmap. [See PR#4120 for more details.]
1997-09-18 03:38:31 +00:00
8b680f206c
Need to flush the I-cache before jumping into just-loaded code.
...
Without this, boot programs fail with some PROM versions...
1997-09-18 01:47:08 +00:00
9ce899230a
After decommisioning a mapping, an IMB kinda needs to happen.
1997-09-18 01:08:56 +00:00
cd69e27594
Prototype alpha_implver(), and fix a think-o in a previous commit.
1997-09-17 23:33:28 +00:00
b806d39316
Implement a stub for the "implver" instruction, which returns the
...
implementation version of the processor.
1997-09-17 23:32:14 +00:00
8b0c39d09e
The additional linefeed appeared again... kill it.
1997-09-17 19:39:37 +00:00
a577f67769
Use common menu / parse functions.
...
Adapt to new console / exec_netbsd arguments.
1997-09-17 18:52:41 +00:00
a1fc367b4b
Cleanup for new libsa/bootp.c (unused global variables).
...
Do the vararg stuff right.
Remove the useless "no_bootp" variable.
1997-09-17 18:50:24 +00:00
5a1b04beab
Put bootfile name into "bootfile" before network initialization, for
...
use by BOOTP.
Put name of bootfile into "bootinfo" structure.
1997-09-17 18:47:13 +00:00
d9641ea06f
Use common menu / parsing functions.
...
Adapt to new console / exec_netbsd arguments.
1997-09-17 18:44:15 +00:00
23d58b46d3
Put name of booted file into a "bootinfo" structure.
...
(not for DOS files for now, we don't know the absolute path)
1997-09-17 18:40:33 +00:00
38b36ed152
-Use shared menu / parsing functions.
...
-Adapt to changed console and exec_netbsd arguments.
-Turn private "cd"-like behaviour into a regular command.
1997-09-17 18:37:58 +00:00
1d521976af
Put name of booted file into a "bootinfo" structure.
1997-09-17 18:32:50 +00:00
0c825594ef
Function to collect geometry and partitioning information about the
...
BIOS-known disks in a "bootinfo" structure (still experimental).
1997-09-17 18:30:51 +00:00
c65435feb3
"document" serial console support
1997-09-17 18:28:50 +00:00
a8c2622575
Collect information in a "bootinfo" structure.
1997-09-17 18:21:40 +00:00
c2095ccd48
Remove old SERIAL support, it will be done at a higher level now.
1997-09-17 18:10:51 +00:00
2fba0a4db7
Convert DOS error numbers into UNIX errno values.
1997-09-17 18:09:04 +00:00
4162c9025a
Do the vararg stuff cleanly.
...
Collect disk information in a "bootinfo" structure.
1997-09-17 18:08:13 +00:00
0851ea1331
Add now common menu / parsing functions.
...
Adapt to new console I/O functionality.
Update exec() arguments.
1997-09-17 18:04:21 +00:00
83ce8d9ef8
Use the "bootinfo" defined structures to collect information about boot
...
device/file and console setting, remove the old, limited, "xbootinfo".
Fix a printf() format warning in debug code.
1997-09-17 18:02:11 +00:00
f93967e407
add new files
1997-09-17 17:51:12 +00:00
dae95d6c0b
-extend serial console code to all 4 BIOS known interfaces
...
-optionally, use Martin's direct hardware access to serial lines
-optionally, new console autoselection method: select serial console
if a character is seen within 1 second
-move awaitkey() here, it can be shared by different bootloaders and
it is used by console autoselection
-collect information about console selection in a "bootinfo" defined
structure, for passing to the kernel
1997-09-17 17:48:00 +00:00
f7b795d3c0
Definitions and helper functions to collect information in the boot
...
loader (still experimental).
1997-09-17 17:39:29 +00:00
fb3350eb72
Console I/O functions for serial lines, accessing the hardware directly.
...
Allows higher baudrates than 9.6 and software flow control.
From Martin Husemann.
1997-09-17 17:31:41 +00:00
27d7edd928
Factor out functions for table driven boot menus and command line parsing
...
usable for different boot programs.
1997-09-17 17:13:02 +00:00
25aa241d8a
Use the private nfs.c instead of "nfswrapper".
...
Disable UDP checksums in the sample configuration, otherwise this doesn't
fit into the ROM.
1997-09-17 17:07:10 +00:00
7f4ef01688
Use the private nfs.c instead of "nfswrapper".
1997-09-17 17:04:28 +00:00
ac061ce8b1
Use a private NFS layer. This allows for more optimization than the
...
separated "nfswrapper.c"/"nfs.c".
This nfs.c differs from the stand/lib/libsa one in that it does not
have a separate mount() function - the mount is done in open().
1997-09-17 17:03:00 +00:00
3c46c18a00
Use the original bp_siaddr field as TFTP server. Allows to have
...
different TFTP and NFS servers.
Don't byteswap port number from UDP header back to network order - net.c
doesn't swap it anymore.
1997-09-17 16:57:07 +00:00
b65a5212c3
Save some bytes by keeping the number of byteswaps minimal.
...
Allow to switch off UDP checksum generation and check via compile time
option (for the really desperade).
1997-09-17 16:30:51 +00:00
74c59c27a2
Keep a copy of the original BOOTP bp_siaddr field, in case we want to
...
use it later for TFTP.
1997-09-17 16:25:29 +00:00
9f58a1a9bb
fix printf() format warnings in debug output
1997-09-17 16:24:00 +00:00
15e10104d5
Define the BWX-capable regions of the CIA chipset's address space (mem,
...
i/o, pci config space mode 0, pci config space mode 1) and the CIA
REV and CNFG CSRs.
1997-09-17 01:35:34 +00:00
879c4c5cf4
If the CIA revision is >= 2, read the CIA configuration register, and
...
remember its contents. Print out a bit of information about the chip,
including whether or not it supports the EV56 BWX instructions.
1997-09-17 01:34:18 +00:00
ed767a2402
Fix a typo in a comment.
1997-09-16 23:12:35 +00:00
87c1a08481
Add stubs for the Alpha Byte/Word Extension (BWX) instructions, present
...
on EV56 and later processors that have the "amask BWX" bit clear. These
instructions will be used to implement non-swizzle bus access functions
on newer systems, such as the new AlphaStation 500s with EV56 and 21172
PCI chipsets.
See "Alpha Architecture Handbook, Version 3", DEC order number EC-QD2KB-TE.
1997-09-16 23:09:10 +00:00
6fc0f07c30
Define the "integer miscellaneous" opcode and subfunctions.
1997-09-16 22:53:32 +00:00
149011c65b
Add support for disassembling the "integer miscellaneous" opcode subgroup.
1997-09-16 22:52:40 +00:00
718fb97e11
Support for the upcoming NetBSD/Amiga Hypercom driver family:
...
* support chip clocks != COM_FREQ, by introducing sc_frequency (for the
mainline code) and adding a frequency parameter right after the rate
parameter to comcnattach() and com_kgdb_attach().
- Make com_isa and com_multi initialize sc_frequency to COM_FREQ.
- Make i386/machdep.c and alpha/dec_xxx.c call com*attach() with the freq.
parameter.
* supio_attach_args get two more fields: a sc_ipl and a sc_arg, both ints.
- com_supio uses the first for interupt establishment (all childs will, as
soon as they exist) and the 2nd for sc_frequency.
- drsupio passes sc_ipl alway as 5, and for the "com"s, sc_arg as 16*115200
- hyper will pass sc_ipl as 6, and sc_arg as 16 * 460800
1997-09-16 20:34:23 +00:00
d1b4b49231
- Use PALcode ops names defined in <machine/pal.h>.
...
- Fix a few bugs in the software single-stepping support code, where
VMS PALcode ops were being checked, rather than OSF/1 PALcode ops,
causing erroneous results in the "exception return" and "unconditional
branch" predicates.
- Add the BWX instructions ("ldbu", "ldwu", "stb", "stw") to the
"load" and "store" predicates.
1997-09-16 19:07:19 +00:00
a14bab3438
Don't define another copy of the PALcode ops here; direct readers to
...
<machine/pal.h>.
1997-09-16 19:03:22 +00:00
e7c2d59885
Fix an oversight in the last commit.
1997-09-16 19:02:13 +00:00
83bd421ad4
Set up base address of ASC for IIfx, per GtMFH.
1997-09-16 16:28:07 +00:00
eb72408374
Clean up comments.
1997-09-16 16:13:47 +00:00
8dbfee6073
Add a comment about the sccA address on the IIfx.
1997-09-16 15:51:09 +00:00
19e555febb
Check booter flags for a bit that tells us whether we should construct
...
bootdev from the SCSI ID passed in via the Booter's environment.
(Does the right thing for older versions of the Booter.)
1997-09-16 14:35:32 +00:00
0599db7897
- Define bits used in the "amask" instruction.
...
- Define processor family IDs returned by the "implver" instruction.
- Prototype alpha_amask().
1997-09-16 06:57:12 +00:00
9faf00ea6a
Implement alpha_amask(), a stub which reads the "architecture feature mask"
...
using the "amask" instruction.
1997-09-16 06:54:01 +00:00
4fe999c6bf
- Add the "amask" and "implver" operate subfunctions.
...
- Add the "ldbu", "ldwu", "stb", and "stw" major opcodes (BWX instructions).
1997-09-16 06:52:48 +00:00
fc80b40481
- Rewrite the functions that provide opcode subfunction names to make it
...
easier to add instructions that the disassembler doesn't know about
(the opcode subfunction number is now printed).
- Add the "amask" and "implver" operate subfunctions.
- Add the "ldbu", "ldwu", "stb", and "stw" major opcodes (BWX instructions).
1997-09-16 06:52:16 +00:00
aab66475d0
Build db_elf.c if ddb is configured. (Oops, this one got away!)
1997-09-16 06:05:54 +00:00
d1fbc82e28
From page 6-9 of "Alpha AXP Architecture Reference Manual, Second Edition":
...
An IMB intruction must be executed after software or I/O devices
write into the instruction stream or modify the instruction
stream virtual address mapping, and before the new value is
fetched as an instruction.
We were missing calls to IMB after mappings were changed, which caused
systems with large I-caches (e.g. my AlphaStation 500) to fail miserably
when mapping in new pages of program text, or when context switching
(I couldn't even get the shell from init!).
1997-09-16 01:52:00 +00:00
9a31fc02fe
Don't forget to increase the free page count in vm_page_free_memory(),
...
pointed out by Mark Brinicombe <mark@causality.com>.
1997-09-16 00:08:09 +00:00
37b8edbeac
In addition to MAS_ABT, check TAR_ABT when doing configuration space
...
reads. This is necessary because of newer AlphaStation firmware doing
the Wrong Thing with target aborts behind PCI-PCI bridges, much like they
do the Wrong Thing with master aborts. Reported by Matthias Drochner.
1997-09-15 23:31:15 +00:00
12f6c5aba1
Make sure to clear MAS_ABT if we received one.
1997-09-15 23:01:29 +00:00
3c3c6a3b31
Use the symbolic name for "received master abort".
1997-09-15 22:35:54 +00:00
8ff22715e8
Define bits in the CIA_ERR register.
1997-09-15 22:34:38 +00:00
dc914f2ee7
Only create verbose delay loop calibration message for DIAGNOSTIC kernels.
1997-09-15 22:17:55 +00:00
33d1f0d190
A few more boards. This really should be split into a seperate file, only
...
active if the kernel has ZBUS_VERBOSE similar to PCI, EISA, (podulebus?),
but I don't have that stuff ready yet.
1997-09-15 21:37:35 +00:00
aa998af35c
Hard-code a couple of sun4 cpu-clock speeds.
...
Fix a printf formatting glitch.
1997-09-15 20:52:36 +00:00
b342ad4ea3
Regen.
1997-09-15 15:08:34 +00:00
cc58dfb1b7
Add some of Compaq's network products.
1997-09-15 15:02:36 +00:00
00a1b6300f
Add DCFA() definitions.
1997-09-15 11:12:13 +00:00
571340263d
Small readability update.
1997-09-15 11:08:38 +00:00
409812c25c
Define isabus by default on the Hades.
1997-09-15 10:51:20 +00:00
319d918511
prototype lfs_cksum ifndef KERNEL
1997-09-15 06:44:48 +00:00
b5004e4ce1
Call the device close routine when we're done reading.
1997-09-14 19:28:17 +00:00
5ba6b94ba6
Do not use KERNBASE to calculate the `end of symbols' location. Instead
...
use the `a_entry' field from the kernel's header as a base.
Pass on a new DDB magic number to the kernel, so kernels linked for a
different KERNBASE value can apply a correction when booted from old
bootblocks.
1997-09-14 19:27:21 +00:00
4969489cb6
Define a new DDB magic number to pass to the kernel.
1997-09-14 19:22:55 +00:00
383448522d
Refer to KERNBASE instead of its current numerical value in comments
...
and some early debugging code.
1997-09-14 19:20:48 +00:00
dc4f93c2a1
Collect sbus status and configuration registers in `struct sbusreg'.
1997-09-14 19:17:25 +00:00
e4a198d193
Move sbus fields to sbusreg.h where they belong.
1997-09-14 19:16:04 +00:00
1cdcb2d362
Get rid of `register'.
1997-09-14 09:03:33 +00:00
a3140bf9f2
NetBSD 1.2 and earlier sparc bootblocks have KERNBASE compiled in. This
...
prevents booting DDB kernels that are built with a different value of KERNBASE.
Apply a correction based on the magic number passed in by the bootblocks.
New bootblocks without the hard-coded KERNBASE reference will be assigned
a new magic number.
1997-09-13 20:36:48 +00:00
c635b25325
In kbdattach() (the pseudo-device attach routine) wait for the keyboard
...
reset sequence to complete. Just sending the reset command and rushing
off -- like it used to do -- might cause the keyboard's response to get
lost in case the remaining kernel initialization decides to interact
with the console (RB_ASK!) by calling cngetc(), which goes off polling
within the PROM.
1997-09-13 19:12:18 +00:00
6282a103eb
Last loop variable type change causes undesirable non-terminating loops.
...
Change for-loop expressions to get the intended effect again.
1997-09-13 18:44:55 +00:00
7bc1f9d060
Recognize SB AWE64 Gold.
1997-09-13 13:37:28 +00:00
e97c5f6c50
Update the model string for current reality.
1997-09-13 10:09:39 +00:00
9a5f8236b5
Don't panic if we receive a Processor Correctable Error or a System
...
Correctable Error; report them, instead.
XXX Need a platform-specific machine check handler so we can decode the
logout area on such errors.
1997-09-13 10:01:33 +00:00
0f0563f57f
Declare TCVERBOSE by defopt in files.tc. Include opt_tcverbose.h in tc.c.
1997-09-13 08:52:23 +00:00
4d15bd0b78
Declare SCSIVERBOSE by defopt in files.scsipi. Include opt_scsiverbose.h
...
in scsi_base.c and st.c.
1997-09-13 08:51:15 +00:00
377e2c7b82
Declare PCIVERBOSE by defopt in files.pci. Include opt_pciverbose.h
...
in pci_subr.c.
1997-09-13 08:49:50 +00:00
7f3eb8e4fb
Declare EISAVERBOSE by defopt in files.eisa. Include opt_eisaverbose.h
...
in eisa.c.
1997-09-13 08:48:59 +00:00
12b0c2a20a
The Alpha console uses BOOTP for network booting, so the NetBSD kernel
...
should, too. Enable the BOOTP support in nfs_boot().
1997-09-13 07:42:01 +00:00
27e54e6dc3
Prevent an extra newline from being printed if the root device is a network
...
interface.
1997-09-13 07:38:25 +00:00
6b2d5c18a7
Correct a comment regarding the sense of the nfs_boot_rfc951 global.
1997-09-13 06:16:04 +00:00
f784e8dc15
Apparently, new AlphaStation 500/600 firmware has the same problem with
...
PCI master aborts as eb164 firmware, so use the same workaround mechanism
on all system types (clear error register's master abort bit, and check
it after accessing configuration space), not just eb164's.
This also fixes a bug on eb164's - when making the Alpha port compile
again, I made an error that caused this to not be used on eb164 systems,
either. Thanks to Matt Jacob for pointing out this goof.
1997-09-13 05:58:07 +00:00
f762783999
Wierd- well, what isn't with devices? Anyway, the type code for the ISP
...
chip on AlphaStation 500 is 2- which wasn't handled, and bad things happened
because the default case wasn't sane. Both are corrected now.
1997-09-13 05:18:30 +00:00
b4ae3706db
Use the same indentation as other two place, sys_ptrace() and
...
procfs_control().
Ok'ed by Jason R. Thorpe.
1997-09-13 04:25:35 +00:00
4f7a116064
Add missing "break;" statements in the code that determines the
...
media setup by the Alpha SRM console software.
From Ross Harvey <ross@teraflop.com>.
1997-09-12 22:40:02 +00:00
8f33476972
Make console on multiport cards more likely to work (obvious bug,
...
fix still untested).
Closes PR kern/4095 by enami tsugutomo.
1997-09-12 13:31:10 +00:00
daf8124106
regen
1997-09-12 11:05:20 +00:00
e4c20d6210
another graphics chip...
1997-09-12 11:04:36 +00:00
d8f1d9401e
Adjust packet len in mbuf header for incoming broadcasts.
...
Closes PR kern/4087 (by myself).
1997-09-12 10:58:31 +00:00
a9155c5057
Set the status word as well, and remove a bogus comment.
1997-09-12 10:29:20 +00:00
78b5eb1f52
Create DMA maps on ordinary GUS (non-MAX) cards. Now it should work again.
1997-09-12 10:27:10 +00:00
701aa39854
Oops; didn't delete two retval[] usages in setregs().
1997-09-12 09:59:53 +00:00
cba224ed23
FPCOPROC is no longer used here.
1997-09-12 09:29:13 +00:00
4e5b47eba3
fputype is defined in locore.s now.
1997-09-12 09:27:49 +00:00
11393fe5b9
Add and use fputype. Optimize floating point save/restore routines a bit more
...
if only one CPU type is defined. Eliminate FPCOPROC. Merge some of the
68060 floating point stuff from the x68k port.
1997-09-12 09:25:36 +00:00
5933da103c
Add and use fputype. Optimize floating point save/restore routines a bit more
...
if only one CPU type is defined. Eliminate FPCOPROC.
1997-09-12 09:23:18 +00:00
27f2065c2c
Update syscall() and setregs() in the wake of the recent execve() changes.
1997-09-12 08:55:01 +00:00
cd9a968cb7
Fix a test that should be on fputype rather than cputype.
1997-09-12 08:41:55 +00:00
8a42aeac7b
GC old comment.
1997-09-12 08:35:15 +00:00
8a8fa1ee59
Eliminate some uses of FPCOPROC.
1997-09-12 08:19:00 +00:00
1192cdbe7e
FPCOPROC is already in the Makefile; no need for it here.
1997-09-12 08:14:06 +00:00
30073771b6
Move definition of FPCOPROC into the Makefile, since it's always required.
1997-09-12 08:13:26 +00:00
e9f392b0a9
Eliminate some uses of FPCOPROC.
1997-09-12 08:08:50 +00:00
55582e5bc2
The FPCOPROC option no longer exists.
1997-09-12 08:04:12 +00:00
49f0bbb105
Nuke Locore.c. It's way too out of date to be useful at this point.
1997-09-12 07:59:20 +00:00
895a1eced4
Fix an error from when Locore.c was removed.
1997-09-12 07:56:37 +00:00
50cfb2fcdd
Kill vestiges of Locore.c.
1997-09-12 07:55:17 +00:00
982f24e698
Always initialize all registers in setregs().
1997-09-12 07:00:30 +00:00
42c101eb00
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-12 05:48:08 +00:00
25f153bb22
Add fe0.
1997-09-12 05:22:55 +00:00
761c2e275a
Fix bogus comment.
1997-09-12 05:20:52 +00:00
73b4fdacad
Initialize all registers in setregs().
1997-09-12 05:01:09 +00:00
d0917c65e9
Add an ibcs2_setregs().
...
XXX Current implementation is a horrible kluge.
1997-09-11 23:07:25 +00:00
99a6404735
Add an ibcs2_setregs().
1997-09-11 23:05:30 +00:00
3f70f046fc
Fix wait(2) and waitpid(2) emulation; it's the responsibility of the syscall
...
stub to copy %edx to *status, and trying to do it here loses with some libc
versions.
1997-09-11 23:05:02 +00:00
16a8787248
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-11 23:01:44 +00:00
44f6ba6c55
VM_MAX_ADDRESS is the user max address -- adjust
1997-09-11 14:01:07 +00:00
4658336eda
Add a 'reboot' command with a single parameter specifying the boot flags.
1997-09-11 06:55:56 +00:00
ae6bc354b9
Use the macro PC_ADVANCE(), if defined, to skip over a breakpoint.
1997-09-10 19:37:31 +00:00
aeec7a4ecc
Turn off "branch folding" in microsparc II processors. This seems to
...
avoid strange panics happening. Patch suggested by Chris Torek.
1997-09-10 19:11:23 +00:00
9f1374779b
Remove a comment that's incorrect since last commit.
1997-09-10 18:26:33 +00:00
b1fe1c2452
Generalize somewhat (now works for alpha too).
1997-09-10 16:25:07 +00:00
4fb8bf7262
PR/4098: Alan Barrett: Fix diagnostic printf formatting.
1997-09-10 13:44:20 +00:00
0310453204
The 501 uses 16 ports, and has a wider range of possible I/O address.
1997-09-10 05:40:23 +00:00
5dd9e25dca
For consistency: VIA_initialize() -> via_init()
1997-09-10 04:38:47 +00:00
d1feb13390
Move VIA_initialize() from configure() to locore.s, shortly after
...
setting up and enabling the MMU. This has the effect of ensuring
that any stray interrupts that get posted before the IPL is lowered
will be handled gracefully, i.e. without an access fault or illegal
instruction exception.
1997-09-10 04:22:33 +00:00
eb3c36eb89
Add ROM vectors and I/O info for the IIfx.
1997-09-10 03:43:48 +00:00
03ac1f4a46
Oops. Fix a teensy error in the previous.
1997-09-10 03:31:31 +00:00
7d0a127a3c
If we select a 32k window on the DEPCA, make sure to switch to the lower 32k
...
chunk.
1997-09-10 03:05:39 +00:00
acd1b90617
Some formatting cleanup, and for the ISP2100, the flags hadn't being set
...
quite right, but things worked okay anyhow.
1997-09-10 02:18:19 +00:00
3772f94daf
(for the 2100) The flags weren't set in the right place, but things worked
...
anyway. Wierd. Also, a bit of cleanup.
1997-09-10 02:17:22 +00:00
18430b4e5e
For the 2100- the flags weren't quite right- but things worked anyway. Wierd.
1997-09-10 02:16:13 +00:00
ca07d14b0f
Add SDEV_NOLUNS to another CD-ROM player.
1997-09-09 21:56:01 +00:00
d766a8aa21
Remove some vestiges of BDB.
1997-09-09 21:42:38 +00:00
5367793904
Move the call to nfs_boot_getfh() from nfs_vfsops.c to nfs_boot.c
...
(just for better isolation - it can now be static)
1997-09-09 21:39:17 +00:00
d0a27c5bdd
Circumvent the lack of a reliable gateway/netmask value in the
...
Sun RPC bootparam/whoami return by requesting a "pseudo file"
named "gateway" and using its contents as the gateway:netmask
Example /etc/bootparams line: client gateway=router:0xfffffff0
1997-09-09 21:36:35 +00:00
a6aa4731bc
Fix errors left over from system call conversion.
1997-09-09 21:14:00 +00:00
0bd088474a
Turn on D_DSBL_WRINVAL on `ledma'.
1997-09-09 20:54:48 +00:00
b74cbfe5ed
Eliminate signed-unsigned comparisons.
1997-09-09 18:59:23 +00:00
fa0b187898
Make `hashkey' unsigned.
1997-09-09 18:56:15 +00:00
01c7934554
Define, implement, and use oss_intr().
1997-09-09 17:37:10 +00:00
8178ae5997
Uses PLAY_MSF instead of PLAY for the CDIOCPLAYTRACKS ioctl. This avoid a int16
...
overflow in the PLAY cbd when the resquested track(s) are more than 65535
blocks long. Submitted by t-nkyma@tcp-ip.or.jp in PR kern/4092.
1997-09-09 09:07:43 +00:00
b79dba1b36
syscalls.master changed; regen.
1997-09-09 08:07:00 +00:00
33a2f6fd68
Ups.
1997-09-09 08:05:35 +00:00
b6cefe68ad
Move sys_minherit from 250 to 273 and add a comment why 240-269 are
...
reserved.
1997-09-09 08:04:11 +00:00
25baf39689
Change the way we determine what interrupt routine to use to make
...
it work when drq8 == drq16.
1997-09-09 00:57:10 +00:00
2d8fd853ae
Unlocking the target object within vm_object_overlay() is safe, since
...
the backing object is protected the OBJ_FADING flag.
In vm_object_deallocate(), gain a reference to the object we try to
collapse (per Manuel Bouyer).
1997-09-08 21:23:22 +00:00
1821ecc346
import sys_minherit() from openbsd.
1997-09-08 18:19:45 +00:00
5ef067d288
syscalls.master changed; regen.
1997-09-08 18:12:29 +00:00
bca26d18f9
add sys_minherit (from openbsd)
1997-09-08 18:03:32 +00:00
a1c1c11a40
eliminate non-comment text after #endifs; from Dave Sainty in PR kern/4091
1997-09-08 02:06:30 +00:00
c5d6596b7c
vm_object_deallocate():
...
Unlock the object cache before looking for collapse candidates.
Use vm_object_lock_try() to obtain a lock on a collapse candidate.
This avoids a deadlock due to recursively entering
vm_object_deallocate() in case a backing object goes away.
vm_object_collapse() and helper functions:
The object passed in is locked; make sure it is locked when
we leave vm_object_collapse().
XXX: Currently, the object is not unlocked during while we possibly
wait for pager data. We need to consider the effects of
simultaneous calls to vm_object_collapse() on the same object
in case unlocking is necessary.
1997-09-07 21:19:41 +00:00
9bec4e7918
Don't hold on to object and queue locks while sleeping.
1997-09-07 20:41:59 +00:00
0c386233d4
Adapt a diagnostic to big-endian machines.
...
(Not that it actually works on little-endians, but we can easily make it not
work on big-endians all the same).
1997-09-07 20:39:23 +00:00
fff424c798
Add missing `unlock(&vm_object_list_lock);'
1997-09-07 19:31:52 +00:00
6da60facfb
GC a bunch of NEWCONFIG stuff.
1997-09-07 13:05:39 +00:00
892d336277
Increase FDC_MAXIOSIZE to MAXBSIZE, now that we can handle it.
1997-09-07 13:03:10 +00:00
9c76fe8e78
Recognize any of the memory configurations allowed by the EE16 setup program,
...
and a few more that I can't test. Something is still wrong with the mapping of
16k boards, though.
1997-09-07 10:16:07 +00:00
fba474f53a
add prototype definition for DHCP support
1997-09-06 14:32:31 +00:00
4d51c802c6
Bus-ify GUS driver.
1997-09-06 14:31:34 +00:00
969e506de4
Oops, last change made "make depend" work incompletely. Don't define
...
a "depend" rule here.
1997-09-06 14:26:47 +00:00
25b465a80c
Bus-ify the GUS driver.
1997-09-06 14:23:13 +00:00
281398581a
-Wall fixes
1997-09-06 14:08:27 +00:00
3b191b29c0
enable -Wall
1997-09-06 14:07:57 +00:00
be8a78e9b5
-use DHCP extensions in bootp()
...
-enable -Wall
1997-09-06 14:06:53 +00:00
80d9738db8
-Wall fixes
1997-09-06 14:03:55 +00:00
d99aa8efc0
Collect prototypes here.
1997-09-06 14:02:51 +00:00
7546d66094
Make sure the <machine/*.h> includes come from current kernel sources,
...
not from installed userland.
1997-09-06 14:02:13 +00:00
93bb01fe6d
-Wall fixes
1997-09-06 13:57:14 +00:00
616ee86daf
-add DHCP support - this option also extends the vendor extension area
...
to 312 bytes (The classical 64 bytes are likely to be too small if a
rootpath is transferred.)
-make CMU vendor extension support optional
-remove code handling domain name/server (unneeded for boot code)
- -Wall fixes in debug code
1997-09-06 13:55:56 +00:00
b8b28812be
Add missing keypad entry for '+' and correct a comment. From pr#3893.
1997-09-06 12:41:10 +00:00
da80f6c913
Catch bus error in sbc_pdma_out() and panic with a reasonable
...
error message.
1997-09-06 07:53:14 +00:00
18883bf3fc
In itematch(), check to see if the framebuffer PA matches either the
...
$Fssxxxxx 1MB slot space documented in the old Inside Macintosh, or the
$Fs0xxxxx 1MB slot space documented in the new IM and Guide to Macintosh
Family Hardware.
1997-09-06 06:51:54 +00:00
ed2ec4869c
Update for Chris Demetriou's changes made to the bus.h interface:
...
- bus_space_copy -> bus_space_copy_region (for consistency)
- "cacheable" argument becomes a "flags" argument instead, with
BUS_SPACE_MAP_CACHEABLE and BUS_SPACE_MAP_LINEAR flags currently
defined.
1997-09-06 05:44:07 +00:00
1aa35e94d4
s/BUS_BARRIER/BUS_SPACE_BARRIER/g
1997-09-06 05:21:14 +00:00
613ee19c60
Add DDB.
1997-09-06 02:04:18 +00:00
1f6a8f7d03
Enable DDB.
1997-09-06 02:03:32 +00:00
66fdddf6aa
Add DDB files.
1997-09-06 02:03:11 +00:00
9dcf694bd2
Prototype db_register_value().
1997-09-06 02:02:25 +00:00
998d79d26a
Add support for DDB (in-kernel debugger) to NetBSD/alpha, based on
...
such code for Mach 3's Alpha port. Initially reworked for NetBSD/alpha
by Chris Demetriou, and then heavily hacked on by me. Works, but is still
a little rough around the edges. Known problems:
- Error recovery could be improved a bit.
- Back traces don't work.
- Single-stepping can be flaky, at times. (Alpha doesn't have hardware
support for single-stepping, and I'm not entirely convinced the
MI DDB software-emulated single-stepping logic is 100% correct.)
- Logic for when to drop into DDB needs some improvement.
1997-09-06 02:00:48 +00:00
36f209b762
Split off PALcode functions into their own header file.
1997-09-06 01:23:52 +00:00
ffcdaf144d
Move around splaudio() to (hopefully) get rid of some rare race conditions.
...
Add a missing call to round_blocksize.
Add some MIDI stuff that will be used in the future.
1997-09-06 01:14:48 +00:00
0b471e545e
add bits for %cr4 and cpu_feature [from freebsd and www.sandpile.org]
1997-09-05 22:28:12 +00:00
drochner