To run a /31 network, participating hosts MUST drop support
for directed broadcasts, and treat the first and last addresses
on subnet as unicast. The broadcast address for the prefix
should be the link local broadcast address, INADDR_BROADCAST.
Taken from FreeBSD, r226402.
Fixes PR kern/51388.
- Remove unused *_NAMES macros for sysctl.
- Remove unused *_MAXID for sysctls.
- Move CTL_MACHDEP sysctl definitions for m68k into m68k/include/cpu.h and
use them on all m68k machines.
ip_undefer_csum -> in_undefer_cksum
in_delayed_cksum -> in_undefer_cksum_tcpudp
The two previous names were inconsistent and misleading.
Put the two functions into in_offload.c. Add comments to explain what
we're doing.
The same could be done for IPv6.
2) Change the IP_RECVPKTINFO option to control the generation of
IP_PKTINFO control messages, the way it's done in Solaris.
3) Remove the superfluous IP_RECVPKTINFO control message.
4) Change the IP_PKTINFO option to do different things depending on
the parameter it's supplied with:
- If it's sizeof(int), assume it's being used as in Linux:
- If it's non-zero, turn on the IP_RECVPKTINFO option.
- If it's zero, turn off the IP_RECVPKTINFO option.
- If it's sizeof(struct in_pktinfo), assume it's being used as in
Solaris, to set a default for the source interface and/or
source address for outgoing packets on the socket.
5) Return what Linux or Solaris compatible code expects, depending
on data size, and just added a fallback to a Linux (and current NetBSD)
compatible value if the size is unknown (as it is now), or,
in the future, if the calling application specifies a receiving
buffer that doesn't match either data item.
From: Tom Ivar Helbekkmo
The source address or output interface can be specified by adding IP_PKTINFO
to the control part of the message on a SOCK_DGRAM or SOCK_RAW socket.
Reviewed by ozaki-r@ and christos@. thanks.
This change makes struct ifaddr and its variants (in_ifaddr and in6_ifaddr)
MP-safe by using pserialize and psref. At this moment, pserialize_perform
and psref_target_destroy are disabled because (1) we don't need them
because of softnet_lock (2) they cause a deadlock because of softnet_lock.
So we'll enable them when we remove softnet_lock in the future.
IN_IFF_DETATCHED to mimic the IPv6 address behaviour.
Add SIOCGIFAFLAG_IN ioctl to retrieve the address flag via the
ifreq structure.
Add IPv4 DAD detection via the ARP methods described in RFC 5227.
Add sysctls net.inet.ip.dad_count and net.inet.arp.debug.
Discussed on tech-net@
- Replace ipintrq and ip6intrq with the pktqueue mechanism.
- Eliminate kernel-lock from ipintr() and ip6intr().
- Some preparation work to push softnet_lock out of ipintr().
Discussed on tech-net.
where they belong to. Make some functions and variables static.
- ip_input.c: reduce some #ifdefs, cleanup a little.
- Move some sysctls into ip_flow.c as they belong there.
No functional change.
Pfsync interface exposes change in the pf(4) over a pseudo-interface, and can
be used to synchronise different pf.
This work was part of my 2009 GSoC
No objection on tech-net@
The IP_MINTTL option may be used on SOCK_STREAM sockets to discard
packets with a TTL lower than the option value. This can be used to
implement the Generalized TTL Security Mechanism (GTSM) according to
RFC 3682.
OK'ed by christos@.
If the IP_RECVTTL option is enabled on a SOCK_DGRAM socket, the
recvmsg(2) call will return the TTL of the received datagram. The
msg_control field in the msghdr structure points to a buffer that
contains a cmsghdr structure followed by the TTL value.
Modeled after FreeBSD implementation.
- All three functions are included in the kernel by default.
They call a backend function cpu_in_cksum after possibly
computing the checksum of the pseudo header.
- cpu_in_cksum is the core to implement the one-complement sum.
The default implementation is moderate fast on most platforms
and provides a 32bit accumulator with 16bit addends for L32 platforms
and a 64bit accumulator with 32bit addends for L64 platforms.
It handles edge cases like very large mbuf chains (could happen with
native IPv6 in the future) and provides a good base for new native
implementations.
- Modify i386 and amd64 assembly to use the new interface.
This disables the MD implementations on !x86 until the conversion is
done. For Alpha, the portable version is faster.
tells a socket that it should both add a protocol header to tx'd
datagrams and remove the header from rx'd datagrams:
int onoff = 1, s = socket(...);
setsockopt(s, SOL_SOCKET, SO_NOHEADER, &onoff);
2) Add an implementation of (SOL_SOCKET, SO_NOHEADER) for raw IPv4
sockets.
3) Reorganize the protocols' pr_ctloutput implementations a bit.
Consistently return ENOPROTOOPT when an option is unsupported,
and EINVAL if a supported option's arguments are incorrect.
Reorganize the flow of code so that it's more clear how/when
options are passed down the stack until they are handled.
Shorten some pr_ctloutput staircases for readability.
4) Extract common mbuf code into subroutines, add new sockaddr
methods, and introduce a new subroutine, fsocreate(), for reuse
later; use it first in sys_socket():
struct mbuf *m_getsombuf(struct socket *so)
Create an mbuf and make its owner the socket `so'.
struct mbuf *m_intopt(struct socket *so, int val)
Create an mbuf, make its owner the socket `so', put the
int `val' into it, and set its length to sizeof(int).
int fsocreate(..., int *fd)
Create a socket, a la socreate(9), put the socket into the
given LWP's descriptor table, return the descriptor at `fd'
on success.
void *sockaddr_addr(struct sockaddr *sa, socklen_t *slenp)
const void *sockaddr_const_addr(const struct sockaddr *sa, socklen_t *slenp)
Extract a pointer to the address part of a sockaddr. Write
the length of the address part at `slenp', if `slenp' is
not NULL.
socklen_t sockaddr_getlen(const struct sockaddr *sa)
Return the length of a sockaddr. This just evaluates to
sa->sa_len. I only add this for consistency with code that
appears in a portable userland library that I am going to
import.
const struct sockaddr *sockaddr_any(const struct sockaddr *sa)
Return the "don't care" sockaddr in the same family as
`sa'. This is the address a client should sobind(9) if it
does not care the source address and, if applicable, the
port et cetera that it uses.
const void *sockaddr_anyaddr(const struct sockaddr *sa, socklen_t *slenp)
Return the "don't care" sockaddr in the same family as
`sa'. This is the address a client should sobind(9) if it
does not care the source address and, if applicable, the
port et cetera that it uses.
and dom_sa_len members from struct domain. Pools of fixed-size
objects are too rigid for sockaddr_dls, whose size can vary over
a wide range.
Return sockaddr_dl to its "historical" size. Now that I'm using
malloc(9) instead of pool(9) to allocate sockaddr_dl, I can create
a sockaddr_dl of any size in the kernel, so expanding sockaddr_dl
is useless.
Avoid using sizeof(struct sockaddr_dl) in the kernel.
Introduce sockaddr_dl_alloc() for allocating & initializing an
arbitrary sockaddr_dl on the heap.
Add an argument, the sockaddr length, to sockaddr_alloc(),
sockaddr_copy(), and sockaddr_dl_setaddr().
Constify: LLADDR() -> CLLADDR().
Where the kernel overwrites LLADDR(), use sockaddr_dl_setaddr(),
instead. Used properly, sockaddr_dl_setaddr() will not overrun
the end of the sockaddr.
route_in6, struct route_iso), replacing all caches with a struct
route.
The principle benefit of this change is that all of the protocol
families can benefit from route cache-invalidation, which is
necessary for correct routing. Route-cache invalidation fixes an
ancient PR, kern/3508, at long last; it fixes various other PRs,
also.
Discussions with and ideas from Joerg Sonnenberger influenced this
work tremendously. Of course, all design oversights and bugs are
mine.
DETAILS
1 I added to each address family a pool of sockaddrs. I have
introduced routines for allocating, copying, and duplicating,
and freeing sockaddrs:
struct sockaddr *sockaddr_alloc(sa_family_t af, int flags);
struct sockaddr *sockaddr_copy(struct sockaddr *dst,
const struct sockaddr *src);
struct sockaddr *sockaddr_dup(const struct sockaddr *src, int flags);
void sockaddr_free(struct sockaddr *sa);
sockaddr_alloc() returns either a sockaddr from the pool belonging
to the specified family, or NULL if the pool is exhausted. The
returned sockaddr has the right size for that family; sa_family
and sa_len fields are initialized to the family and sockaddr
length---e.g., sa_family = AF_INET and sa_len = sizeof(struct
sockaddr_in). sockaddr_free() puts the given sockaddr back into
its family's pool.
sockaddr_dup() and sockaddr_copy() work analogously to strdup()
and strcpy(), respectively. sockaddr_copy() KASSERTs that the
family of the destination and source sockaddrs are alike.
The 'flags' argumet for sockaddr_alloc() and sockaddr_dup() is
passed directly to pool_get(9).
2 I added routines for initializing sockaddrs in each address
family, sockaddr_in_init(), sockaddr_in6_init(), sockaddr_iso_init(),
etc. They are fairly self-explanatory.
3 structs route_in6 and route_iso are no more. All protocol families
use struct route. I have changed the route cache, 'struct route',
so that it does not contain storage space for a sockaddr. Instead,
struct route points to a sockaddr coming from the pool the sockaddr
belongs to. I added a new method to struct route, rtcache_setdst(),
for setting the cache destination:
int rtcache_setdst(struct route *, const struct sockaddr *);
rtcache_setdst() returns 0 on success, or ENOMEM if no memory is
available to create the sockaddr storage.
It is now possible for rtcache_getdst() to return NULL if, say,
rtcache_setdst() failed. I check the return value for NULL
everywhere in the kernel.
4 Each routing domain (struct domain) has a list of live route
caches, dom_rtcache. rtflushall(sa_family_t af) looks up the
domain indicated by 'af', walks the domain's list of route caches
and invalidates each one.
parentheses in return statements.
Cosmetic: don't open-code TAILQ_FOREACH().
Cosmetic: change types of variables to avoid oodles of casts: in
in6_src.c, avoid casts by changing several route_in6 pointers
to struct route pointers. Remove unnecessary casts to caddr_t
elsewhere.
Pave the way for eliminating address family-specific route caches:
soon, struct route will not embed a sockaddr, but it will hold
a reference to an external sockaddr, instead. We will set the
destination sockaddr using rtcache_setdst(). (I created a stub
for it, but it isn't used anywhere, yet.) rtcache_free() will
free the sockaddr. I have extracted from rtcache_free() a helper
subroutine, rtcache_clear(). rtcache_clear() will "forget" a
cached route, but it will not forget the destination by releasing
the sockaddr. I use rtcache_clear() instead of rtcache_free()
in rtcache_update(), because rtcache_update() is not supposed
to forget the destination.
Constify:
1 Introduce const accessor for route->ro_dst, rtcache_getdst().
2 Constify the 'dst' argument to ifnet->if_output(). This
led me to constify a lot of code called by output routines.
3 Constify the sockaddr argument to protosw->pr_ctlinput. This
led me to constify a lot of code called by ctlinput routines.
4 Introduce const macros for converting from a generic sockaddr
to family-specific sockaddrs, e.g., sockaddr_in: satocsin6,
satocsin, et cetera.
Also, add ioctls SIOCGIFADDRPREF/SIOCSIFADDRPREF to get/set preference
numbers for addresses. Make ifconfig(8) set/display preference
numbers.
To activate source-address selection policies in your kernel, add
'options IPSELSRC' to your kernel configuration.
Miscellaneous changes in support of source-address selection:
1 Factor out some common code, producing rt_replace_ifa().
2 Abbreviate a for-loop with TAILQ_FOREACH().
3 Add the predicates on IPv4 addresses IN_LINKLOCAL() and
IN_PRIVATE(), that are true for link-local unicast
(169.254/16) and RFC1918 private addresses, respectively.
Add the predicate IN_ANY_LOCAL() that is true for link-local
unicast and multicast.
4 Add IPv4-specific interface attach/detach routines,
in_domifattach and in_domifdetach, which build #ifdef
IPSELSRC.
See in_getifa(9) for a more thorough description of source-address
selection policy.
Hans Rosenfeld (rosenfeld at grumpf.hope-2000.org)
This change makes it possible to add gif interfaces to bridges, which
will then send and receive IP protocol 97 packets. Packets are Ethernet
frames with an EtherIP header prepended.
roy