0bb3b087a6
Document the VIDC audio format.
2001-01-12 00:12:38 +00:00
531e3e2075
Fix up irq_string for a world without intrnames.
2001-01-12 00:11:42 +00:00
6fa98146d5
Start merging actual code in arm32 and arm26:
...
arm32/arm32/in_cksum_arm32.c -> arm/arm/in_cksum_arm.c
Also move specification of other checksum stuff to files.arm, even though we
use the MI code for that.
2001-01-11 23:27:26 +00:00
455e3228dd
Sync if if_sl.c,v 1.66:
...
Move the VJ uncompress code into the software interrupt.
2001-01-11 22:56:51 +00:00
e94e4a6d47
Move interrupt mapping before initialization of the card (which might
...
cause interrupts). This works around a problem on sparc64, where
interrupts without installed handler seem to cause heavy lossage (and
interrupts are already enabled at this stage of autoconfiguration).
2001-01-11 22:46:40 +00:00
c292853354
Plug a memory leak.
2001-01-11 22:43:02 +00:00
7c1a1a3ae8
Process STRIP software interrupts.
2001-01-11 22:32:21 +00:00
1ce7cbc90b
Sync with if_sl.c,v 1.65:
...
Once we have a complete frame, schedule a STRIP software interrupt,
and manipulate ipintrq from there. This will allow us to clean up
the use of splimp() in this file later.
2001-01-11 22:31:49 +00:00
5159a10d97
Share <machine/elf_machdep.h> between arm26 and arm32.
2001-01-11 22:28:06 +00:00
a5ee0c0a19
Sync with if_sl.c,v 1.64:
...
Make the buffer management in STRIP just a little less evil.
2001-01-11 22:23:11 +00:00
a2dacbe06d
Switch over to using the generic arm header files for everything that arm26
...
and arm32 agree on.
2001-01-11 22:07:53 +00:00
68ac1c6fc3
Add some infrstructure to support saving FPU state.
2001-01-11 22:03:52 +00:00
7c5fe175c0
Defer output processing to the software interrupt.
2001-01-11 21:15:58 +00:00
fd0605fc53
Mmm, dependency problems. Add a cast to make PROC_PC() actually
...
work.
2001-01-11 21:08:18 +00:00
dc037466f5
Install all the headers (arm32 does).
2001-01-11 21:05:03 +00:00
1add2fd369
Remove <arm/endian_machdep.h>, since we might get a big-endian ARM port
...
some time.
2001-01-11 21:03:10 +00:00
8fcc8721da
Put the UQ_ASSUME_CM_OVER_DATA quirk back in. Without it, the Ricochet GS modem fails to work even with the other changes.
2001-01-11 20:35:02 +00:00
0d99070cf2
Change wi(4)'s default from ad-hoc mode to BSS mode. Also
...
some minor manpage fixes.
2001-01-11 19:33:51 +00:00
e292dc9609
Move userret() into a header file, in preparation for splitting
...
syscall() into plain and fancy.
2001-01-11 18:44:29 +00:00
f1152a965b
Modeled after mycroft's changes to the Alpha port, add PROC_PC() to
...
get profiling out of userret(), and move the preemption check to ast().
2001-01-11 18:30:16 +00:00
b2bcd7ceb9
Use MI clock_subr.c.
2001-01-11 16:09:42 +00:00
7424b1f3c1
Grotty hack to attach names to interrupts.
...
Should be fixed when I next overhaul this code.
2001-01-11 14:56:07 +00:00
4f8dfdb556
Don't copy Rx packet to mbuf if it has invalid length; just discard it.
...
Fixes kern/11877.
2001-01-11 14:38:58 +00:00
9caeb5a28b
isinram() argument is not a virtual address but a physical address.
2001-01-11 14:24:04 +00:00
0ef9589af4
X68k's physical RAM is not at lowram-0xffffffff, but has multiple segments.
2001-01-11 14:00:11 +00:00
8829b4cc1a
Sync. w/ luna68k; eliminate irrelavant code imposed by
...
the restriction of hp300 hardware and HP-UX compatibility.
2001-01-11 13:18:36 +00:00
366e0029a8
Ad ezload attribute for EZ-USB firmware loader.
2001-01-11 13:14:08 +00:00
3a755611ac
about WI_TIMEOUT:
...
It is not enough to initialize NANOSPEED ROOT-RZ2000 WLAN Card.
In fact, this card needs about 66900 counts.
2001-01-11 11:54:21 +00:00
a86eb3e683
NANOSPEED ROOT-RZ2000 WLAN Card work.
...
(PRISM II)
2001-01-11 11:37:54 +00:00
c8cf783ce8
regen
2001-01-11 11:33:19 +00:00
b7cad127b5
add product
...
NANOSPEED ROOT-RZ2000 WLAN Card
2001-01-11 11:32:56 +00:00
950e1bd9b8
Eliminate EIOMAPSIZE.
2001-01-11 10:40:55 +00:00
77f3a6ab78
G/C.
2001-01-11 10:36:46 +00:00
65137701cf
g/c the HP/UX core-dump code; it references a function which no longer exists.
2001-01-11 08:44:36 +00:00
35e36fee18
Add USSCANNER_DEBUG
2001-01-11 06:33:51 +00:00
d03f7a8f4b
Mention that I found protocol info in the Linux driver.
2001-01-11 06:33:22 +00:00
7d90b0cb9c
Note that I got information about the protocol from the Linux driver.
2001-01-11 06:20:04 +00:00
d968e32c3a
Add usscanner.
2001-01-11 06:03:21 +00:00
4dc9c52505
Add usscanner and uyap.
2001-01-11 06:01:18 +00:00
8765aa2c42
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol.
...
Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's
not visible in the driver).
Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for
testing.
XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 06:00:31 +00:00
85c0b91ee4
fix pointer arithmetic
2001-01-11 05:31:02 +00:00
35b9cac9d5
regen.
2001-01-10 23:48:54 +00:00
263cb744f8
add EMTAC A2424i 11Mbps WLAN Card
2001-01-10 23:47:56 +00:00
4c9cb837ba
Move the VJ uncompress code into the software interrupt.
2001-01-10 23:29:42 +00:00
8c2f65891f
Prefer memory mapping over io mapping for this card too,
...
although it doesn't have a chance to work on a no-io system because
of an io based BAR lacking a mem counterpart.
2001-01-10 21:41:36 +00:00
a42939d604
Make the driver try mapping memory first, the try io.
2001-01-10 20:31:49 +00:00
0cc28d54b1
... this one's utterly pointless though.
2001-01-10 19:05:46 +00:00
29de7da78b
Header files which don't differ between arm32 and arm26 and can thus be
...
shared.
2001-01-10 19:02:05 +00:00
a688af5edf
if 2nd parameter of key_acquire() is NULL it panics.
...
key_acquire () does not really require 2nd argument.
1.179 -> 1.180 on kame.
2001-01-10 18:52:51 +00:00
5a91dd00b9
Add "arm" to the "machine" line, so we get files.arm pulled in, and more
...
importantly, the arm->arch/arm/include symlink.
2001-01-10 18:38:37 +00:00
9e0af76a89
Empty file to keep config happy.
2001-01-10 18:33:47 +00:00
6a4e1f2a38
Descend into the arm directory on arm26 and arm32.
2001-01-10 18:23:47 +00:00
f4774e6659
Skeleton ARM include infrastructure.
2001-01-10 18:23:02 +00:00
fad85a24d8
On a RW->RO transition, explicitly clear fs_fmod after the cgupdate/sbupdate,
...
to prevent spurious writebacks and whinging about the (correct!) clean flag.
(Why this isn't done in ffs_sbupdate(), I dunno...)
2001-01-10 17:49:18 +00:00
fc0f2f8909
Added four config entries for the DLink DE-650CT.
...
XXX I think we should have if_ne_pcmcia.c try to allocate I/O addresses
around 0x300 or we'll end up with a lot of quirks for NE2k based
cards which have bad CIS's.
2001-01-10 17:37:27 +00:00
1c67d8b72d
Add uftdi and ucom, now that they're tested and known to work.
2001-01-10 17:32:08 +00:00
6b133efd3e
Make this work with the SA 431 and 42xx series controllers.
2001-01-10 16:48:04 +00:00
d8735dd13a
RCS ID
2001-01-10 16:45:56 +00:00
3ba997a164
Add the 53c1510d and 53c895a. 1510d confirmed working by
...
Mark Davies <mark@MCS.VUW.AC.NZ>.
2001-01-10 15:50:20 +00:00
6c3ff254ea
Get rid of (unintentionally added) ^M.
2001-01-10 14:58:08 +00:00
234840a1ae
Initialize the FBC mode register in cg6attach().
...
Values are taken from sunGX.[ch] in xsrc.
Now RASTERCONSOLE works properly on my SS1+ with old 2-slot sbus cg6.
2001-01-10 13:26:52 +00:00
86035aa9c0
dummy WSKBDIO_SETLEDS WSKBDIO_GETLEDS for wsconsctl(8)
2001-01-10 08:43:13 +00:00
bc21905f3c
attach the softdep pagecache pseudo-buffers to the inode
...
so we can find them quickly in the softdep truncate path.
2001-01-10 04:47:10 +00:00
07ca2a03bf
Correct copyright year.
2001-01-10 02:33:47 +00:00
8c4bd70cda
Add linux_blkio.c
2001-01-10 02:29:29 +00:00
d772be168f
Declare linux_ioctl_blkio and call it from the main routine.
2001-01-10 02:28:38 +00:00
da9e8a988d
Add some BLK* ioctl calls. Currently only the easy and useful ones
...
are implemented.
2001-01-10 02:28:01 +00:00
ea2d93c355
fix indentation
2001-01-10 01:16:59 +00:00
3a7c4f5973
Don't panic if we detect an IRQ combination that can't be shared,
...
just return NULL.
2001-01-10 01:15:32 +00:00
6907c4ded8
Do syscall_intern after p_traceflag has been copied to the new
...
process (if it is inherited), so that ktrace continues to work
properly on the child.
2001-01-09 23:36:50 +00:00
3d5c5173f5
Add a quirk table for specific implementations.
...
Change the NEC-specific subvendor test for GPIO initialization into a more
generic quirk table flag.
Add a quirk flag for hardware that has left and right channels reversed
(currently the COMPAL 38W2 a.k.a. Dell Inspiron 5000e)
Clean up PCM channel initialization and add channel swapping option.
2001-01-09 23:27:07 +00:00
6ec1759deb
regen
2001-01-09 23:20:22 +00:00
ca3478d0e2
Add COMPAL vendor and COMPAL 38W2 product (OEM for Dell Inspiron 5000e)
2001-01-09 23:19:03 +00:00
d11cfe3c79
Regen; added Symbios 53c1510D.
2001-01-09 23:16:18 +00:00
ff00b6c009
Add Symbios 53c1510D.
2001-01-09 23:15:39 +00:00
cb2d30303b
Add new AC97_HOST_SWAPPED_CHANNELS host flag that causes left and right
...
mixer channels to be swapped (required for hardware that has wiring
reversed).
2001-01-09 23:14:25 +00:00
d82b599214
Add 'vendor' toplevel name. To be used as vendor.<vendorname>.* for
...
vendor-specific data.
2001-01-09 21:30:25 +00:00
ba45ad64d3
Ifdef some routines only needed for ELSA Quickstep cards when compiling
...
without support for those.
2001-01-09 21:26:30 +00:00
5d0c67c603
When adding isdn devices I forgot to check chrtoblktbl.
...
Fix this know for the affected archs.
2001-01-09 20:51:04 +00:00
f5428a0a17
Fix oversight in slip softintr changes.
2001-01-09 20:20:13 +00:00
442e2e73a9
ISPASYNC_PDB_CHANGED -> ISPASYNC_LOGGED_INOUT.
2001-01-09 18:56:24 +00:00
64c3b7f881
Add some 2X00 specific state flags for status response entries. Add the
...
defines necessary for the REGISTER FC4 TYPE SNS subcommand.
2001-01-09 18:56:06 +00:00
5599d31360
ISPASYNC_PDB_CHANGED->ISPASYNC_LOGGED_INOUT. And also, ISPASYNC_CHANGE_NOTIFY
...
is for both local loop and fabric cases now.
2001-01-09 18:54:53 +00:00
81df08ddef
Use a SNS REGISTER FC4 TYPE subcommand to register with the name server.
...
This means we should be able to work with McData switches now. Change
ISPASYNC_PDB_CHANGED to ISPASYNC_LOGGED_INOUT (more descriptive). Allow
F-Port topologies to use target ids 0..125 to log into fabric devices.
Yet again fool around with defaul WWN stuff.
2001-01-09 18:54:06 +00:00
1b4eef2721
- Make VDAC state per-board.
...
- Add an ioctl to reset the STIC.
- Add an ioctl to restore the screen contents from backing.
- Other tweaks.
2001-01-09 16:04:03 +00:00
f134ba4486
atop(): cast argument to `paddr_t' (instead of `u_long') to avoid
...
truncating the address.
2001-01-09 13:55:20 +00:00
c99aee0084
Add emulation of KIOCSOUND.
2001-01-09 13:01:03 +00:00
84a9223126
Add APCS-32 return instructions, though not used yet.
2001-01-09 12:11:57 +00:00
5395f63f35
Revert apparently accidental commit.
2001-01-09 12:03:15 +00:00
8a3a316883
Do not range_test() unless DIAGNOSTIC.
...
Suggested by Tetsuya Isaki <isaki@v6.ipc.hiroshima-u.ac.jp>.
2001-01-09 11:38:32 +00:00
7f2aa054f1
ffs_reload(): Copy fs_ronly into the new superblock, too, as it may have been
...
modified on disk (e.g. by fsck(8)). This flag should really be elsewhere.
2001-01-09 10:44:19 +00:00
3efddcd88e
Configure PCI_INTERRUPT_LINE on the other side of the pci-bridge on OF3 too.
2001-01-09 08:04:53 +00:00
0ed2fcf9fb
*minor* knf
2001-01-09 06:36:13 +00:00
a6ef389457
If DIAGNOSTIC and the segment writer gets a badly sized buffer, panic()
...
instead of silently corrupting the filesystem.
2001-01-09 05:05:35 +00:00
efed547b78
Once we have a complete frame, schedule a SLIP software interrupt,
...
and manipulate ipintrq from there. This will allow us to clean up
the use of splimp() in this file later.
2001-01-09 05:04:23 +00:00
30be6aa8b6
Add NETISRs for SLIP and STRIP. (Geez, I wish we had the softintr
...
API everywhere...)
2001-01-09 05:03:10 +00:00
692a2bc939
Make the buffer management in SLIP just a little less evil.
2001-01-09 04:42:48 +00:00
7a36660307
If there remains no memory in a segment after we chopped off ``the last
...
page,'' skip the segment. Fixes boot problem on Compaq ProLiant ML370
reported at current-users by Mark Davies.
2001-01-09 03:45:49 +00:00
443a19e035
convert to using .WAIT
2001-01-09 03:13:39 +00:00
6378ac40ee
pass the right $CPP
2001-01-09 02:31:37 +00:00
7a9f0b9a95
sync to GENERIC 1.390:
...
- add an NIC & vlan
- add auich, esm, neo audio
2001-01-09 00:47:18 +00:00
ac6176f581
Fix some oversights from fixing option names.
2001-01-09 00:46:01 +00:00
6ac8983e9d
sort auich in respect to auvia
2001-01-09 00:40:53 +00:00
c5acd6aad5
Fix a typo in the ALTQ changes.
2001-01-08 23:43:34 +00:00
301b806db0
ebus_find_node(): plug memory leak; make debug output meaningfuller.
2001-01-08 22:15:47 +00:00
7bebf9a408
On ADMtek chips, don't just idle the chip when programming the
...
multicast filter. These chips don't like to go into "idle" state
very much, so we have to use the big hammer and reset the chip,
instead.
2001-01-08 22:12:57 +00:00
2987c0474d
Fixes from OpenBSD by Brandon Creighton. (bjc@openbsd.org)
...
Log message from OpenBSD:
> - add EMODD emulation (EMODF) -- this fixes modf() and some libm code
> on systems which don't have native EMODD (i.e., most of them)
>
> - big cleanup of the getval_* stuff - have one routine doing most of the work
> instead of four doing the same thing
>
> - add some miscellaneous routines -- count sig. bits
>
> - add more operand addressing modes (still not all fully implemented)
> both the existing POLYD and EMODD can use them
>
> - add me to copyright
>
2001-01-08 22:08:22 +00:00
d101f6f462
Add Accton EN2242 10/100 MiniPCI Ethernet.
2001-01-08 21:50:47 +00:00
2482ba1fab
Regen; added Accton EN2242.
2001-01-08 21:47:38 +00:00
3628087824
Add product ID for the Accton EN2242 10/100 Ethernet (an ADMtek AN985).
2001-01-08 21:47:10 +00:00
f53c899649
Add isdn devices to all archs that seem to support at least one of the
...
necessary busses. Sync comments with reality for archs that already had
the devices.
2001-01-08 21:46:33 +00:00
666e82a4e9
Use the AN985 media switch on the AN985.
2001-01-08 21:45:42 +00:00
e9bb880aaf
The ADMtek AN985 "ghosts" the single built-in PHY at every MII address.
...
Work around this by having a custom media init routine that limits the
search to MII address 1.
2001-01-08 21:40:29 +00:00
f9c77ef635
Only build "esm" if it's included in the kernel config file.
2001-01-08 21:16:26 +00:00
c6274d6e3d
Add and enable the esm PCI audio driver
2001-01-08 20:48:11 +00:00
e6616f532a
Cosmetic changes.
2001-01-08 20:21:16 +00:00
2b00271327
Regen; added DEC SWXCR RAID.
2001-01-08 20:08:17 +00:00
18b051656b
Add product ID for DEC SWXCR RAID (a Mylex v5 controller).
2001-01-08 20:07:21 +00:00
a3aa8d5abc
Add esm audio driver.
2001-01-08 19:55:51 +00:00
ca3b496216
Initial import of the Maestro 2/2e 'esm' PCI audio driver. This driver
...
is based on the FreeBSD 'maestro' driver by Taku YAMAMOTO
<taku@cent.saitama-u.ac.jp>
2001-01-08 19:54:31 +00:00
d75edd2077
Reserve system call slots for getcontext, setcontext, LWPs, and
...
scheduler activations.
2001-01-08 18:25:35 +00:00
5af86c93fb
The "#auvia" line was removed from this config; remove the "#audio* at
...
auvia?" line as well.
2001-01-08 17:35:29 +00:00
757dca55b7
These ioctl commands should be '_IOW' to set value.
...
WSMOUSEIO_SRES
WSMOUSEIO_SSCALE
WSMOUSEIO_SRATE
2001-01-08 11:20:24 +00:00
21ea7bd559
regen
2001-01-08 09:53:08 +00:00
48276d65d9
Add IDs for the NEC Versa LX and Versa Pro LX
2001-01-08 09:52:22 +00:00
a0a2fc0688
Implement WSMOUSEIO_SRES to control A/D port scan interval.
2001-01-08 09:50:08 +00:00
cdd63c8e8b
Add RCSid.
2001-01-08 08:37:12 +00:00
c3b283e57f
Missed RCSid in rev. 1.61.
2001-01-08 07:48:59 +00:00
6717a2ac1b
in vtruncbuf(), use a "synchronous freeing" flush to prevent a race
...
between write i/os in a disk-based filesystem vs. the disk block being
freed by a truncation, allocated to a new file, and written again with
different data. if the disk driver reorders the requests and does
the second i/o first, the old data will clobber the new, corrupting
the new file.
2001-01-08 07:05:47 +00:00
9bbe5b85ca
"lp" must be defined reagardless from __HAVE_OLD_DISKLABEL
2001-01-08 06:57:21 +00:00
f0ff6fc897
in uvn_flush(), when PGO_SYNCIO is specified then we should wait for
...
pending i/os to complete before returning even if PGO_CLEANIT is not
specified. this fixes two races:
(1) NFS write rpcs vs. setattr operations which truncate the file.
if the truncate doesn't wait for pending writes to complete then
a later write rpc completion can undo the effect of the truncate.
this problem has been reported by several people.
(2) write i/os in disk-based filesystem vs. the disk block being
freed by a truncation, allocated to a new file, and written
again with different data. if the disk driver reorders the requests
and does the second i/o first, the old data will clobber the new,
corrupting the new file. I haven't heard of anyone experiencing
this problem yet, but it's fixed now anyway.
2001-01-08 06:21:13 +00:00
9f119cbf91
wrap icmp6 checksum error printf() into #ifdef ND6DEBUG.
...
sync with kame, NetBSD PR 11911.
2001-01-08 06:12:46 +00:00
d040bd5908
Return error in the case of using ODIOCGDINFO or ODIOCGDEFLABEL when
...
the number of partitions is > OLDMAXPARTITIONS. This is better
than silently truncating the label (don't want to silently throw
away partitions when using an old disklabel binary on a label with
> 8 partitions). From Enami Tsugutomo.
2001-01-08 02:03:45 +00:00
4d4b2b5626
Nevermind that it's silly to include PROT_EXEC even if a vnode
...
doesn't have the exec bit set, we need to have PROT_EXEC set
in order for some expected mmap/mprotect behavior to work, so
do the last bit slightly differently: if udv_attach() fails, and
the protection (NOT maxprot) doens't include PROT_EXEC, then clear
PROT_EXEC from maxprot and try udv_attach() again.
Sigh, mmap really needs to be rototilled.
2001-01-08 01:35:03 +00:00
b79ddef845
Also ignore receiver errors if VLAN_MTU is enabled; the 21040 appears
...
to require this.
2001-01-07 23:29:12 +00:00
6b82e7fe42
64bit police.
...
Rumors say there are archs without ISA busses, so avoid including
(uneccesarily) isa bus headers in MI files.
XXX this is the minimal solution, layer interface calls will have
XXX to be revisited later
2001-01-07 21:47:24 +00:00
0aa3c2b02f
Sync machine types with atari/include/cpu.h
2001-01-07 21:24:05 +00:00
427a7dcda0
Kill a typo.
2001-01-07 21:19:05 +00:00
b9a7cb087a
Nuke a cf_unit abuse.
2001-01-07 21:17:32 +00:00
fb19421ce8
Expand identify_cpu() for the Milan.
2001-01-07 21:12:31 +00:00
c21ca4d86a
Add the Milan as a possible machine type.
2001-01-07 21:08:03 +00:00
3c48826086
Make ahdi_part and ahdi_root 'packed' so I can use this include file on
...
an x86 machine to analyze my atari disk.
2001-01-07 21:05:16 +00:00
6ad6e22efb
Update the printf format in straymfpint() too.
2001-01-07 20:59:29 +00:00
d6ef667612
Fixes for straytrap():
...
- make it clear that we are printing hex-numbers
- fix the loop protection.
2001-01-07 20:56:51 +00:00
2aa1fb4020
Remove old-style interrupt-counting infrastructure (intrnames/intrcnt).
2001-01-07 19:39:08 +00:00
4522010c18
Make certain we see COM_MPLOCK, MULTIPROCESSOR, and LOCKDEBUG
...
to avoid any confusion about whether or not we have a lock in the softc.
2001-01-07 18:09:26 +00:00
e2d1c1f926
Adapt all disk devices in MI directories to handle ODIOC* calls
...
for ports that have bumped MAXPARTITIONS (and thus define
__HAVE_OLD_DISKLABEL).
2001-01-07 18:09:01 +00:00
3947143db7
Define __HAVE_OLD_DISKLABEL in <machine/types.h> for i386 (where the
...
other __HAVE_* defines are). Conditionalize definition of old
disklabel struct and ODIOC* definitions on it, allowing other ports
to bump the number of partitions in the label if they want to
(see comment in sys/disklabel.h).
2001-01-07 17:55:40 +00:00
d6bd1012e3
Add facilities for counting interrupts, and a "machine irqstat" command to
...
DDB to tell us what's going on.
2001-01-07 17:01:53 +00:00
2b076072d3
Add a "name" argument to irq_establish and friends, in imitation of arm32.
2001-01-07 15:56:01 +00:00
6b513dfe29
Remove ioc_irq_establish -- It wasn't serving any useful purpose.
2001-01-07 15:36:34 +00:00
fb3dd6b589
ANSIfy.
2001-01-07 15:27:37 +00:00
6861904096
Regen.
2001-01-07 15:01:06 +00:00
55c57a573f
Add an Altima PHY.
2001-01-07 15:00:46 +00:00
32ad12527c
ANSIfy.
2001-01-07 15:00:02 +00:00
e90b26477e
Regen.
2001-01-07 14:47:00 +00:00
6d5a1918f8
Add Epson 1640 scanner. (From FreeBSD)
2001-01-07 14:46:31 +00:00
32ff4eef91
ANSIfy.
2001-01-07 14:28:02 +00:00
5b6d98341e
Try both the old (wrong) and new SOFT_RESET request type.
2001-01-07 14:26:19 +00:00
c730bd06be
Un-__P, remove arg names.
2001-01-07 13:48:24 +00:00
5c09bd5fc5
Un-__P and remove function arg names.
2001-01-07 13:38:42 +00:00
218d552c4c
Note ISDN devices.
2001-01-07 13:10:54 +00:00
f68bcbc806
Use ${PRINTOBJDIR}.
2001-01-07 08:38:01 +00:00
e2173eff07
Add some definitions.
2001-01-07 07:29:33 +00:00
781516b080
Only include PROT_EXEC in maxprot if the user specified PROT_EXEC
...
in the mmap() call. maxprot is used to create device mappings,
and always including PROT_EXEC causes the mapping to fail on the Alpha
when mapping a non-RAM offset of /dev/mem (which may be sparse, so
instruction fetch from there is disallowed).
2001-01-07 06:16:46 +00:00
744c012068
Use uvm_aio_biodone instead of uvm_aio_aiodone for top-level buf
...
so that uvmexp.paging is updated if this i/o was initiated by
the pagedaemon.
2001-01-07 05:54:41 +00:00
6795b1b166
No, really, pass the PA to alpha_pa_access(), not the PFN.
2001-01-07 05:42:54 +00:00
c5802f9f90
avoid unused variables if not RASTERCONSOLE
2001-01-07 05:41:50 +00:00
f514e805ed
Move prototypes for mips_user_cachectl() and mips_user_cacheflush()
...
to <mips/cachectl.h>.
2001-01-07 04:13:16 +00:00
7b9c3218e2
Make this C++ safe.
2001-01-07 03:59:31 +00:00
610a127a3d
Fix a stupid = vs == bug that prevented the code working usefully at all.
...
While I'm here, fix all the other GCC warnings too.
2001-01-07 00:30:29 +00:00
fa64805abd
Specify (void) arguments, hence avoiding GCC warning.
2001-01-07 00:07:58 +00:00
46b2a2fcd4
Do ess_config_addr() in the ofisa front end, rather than in the match
...
routine. Prevents problems with non-SCR ess chips, as described in
PR 11630.
2001-01-06 22:50:00 +00:00
a30debae05
Add description of the pinout of a standard DB-25 parallel port,
...
relative to the bits described here.
2001-01-06 17:16:19 +00:00
4152b5b212
Adjust recent netboot fix to work in the 5100 as well.
2001-01-06 16:59:53 +00:00
1c518d67a0
Add WDC_CAPABILITY_SINGLE_DRIVE to ignore secound drive. Wdc on pcmcia will
...
be attached with this flag.
Some CF Card (for ex. IBM MicroDrive and SanDisk) doesn't seem to implement
drive select command. In this case, you can't eliminate ghost drive properly.
So you should use this flag to ignore the ghost by force.
2001-01-06 14:55:49 +00:00
32c62f1fdb
ANSIfy
2001-01-06 13:09:05 +00:00
94094c44ab
Change debugging output a little.
...
Don't the for the wrong id when UMASS_DEBUG is set.
2001-01-06 12:14:39 +00:00
f6f8ab2d11
Don't #define UAUDIO_DEBUG here.
2001-01-06 12:12:24 +00:00
8ce2076cf5
Fix a typo in debug printf.
2001-01-06 06:01:59 +00:00
169563b7c1
#warn is _not_ the GCC CPP directive that gives a warning, #warning is.
...
(this code has, apparently, always been wrong, but current GCC is kind
enough to warn about unknown CPP directives.)
2001-01-06 00:35:54 +00:00
7e14d8a67c
Cosmetics
2001-01-05 23:58:02 +00:00
ebb91e152f
Disable the daic driver for now. It's microcode handling needs
...
some thougths (legal problems), and the driver is not ready
for prime time anyway.
2001-01-05 23:22:01 +00:00
4c176b9806
Disable the daic directory for now, it breaks with OBJDIR builds.
...
This needs more thought.
2001-01-05 23:17:48 +00:00
d7f811d098
utrace(2): limit size of user data to KTR_USER_MAXLEN (currently 2048); return EINVAL if 'len' is bigger
2001-01-05 22:25:26 +00:00
2bd5bf0ec2
regen after utrace() parameter rename
2001-01-05 21:53:38 +00:00
fbc7e223d7
utrace(2): rename 'id' parameter to 'label'
2001-01-05 21:42:08 +00:00
6d92451397
don't keep adding targets, but include bsd.kinc.mk... This time make obj borke.
2001-01-05 20:18:10 +00:00
34875ea7b1
Now let it survive "make install" too.
2001-01-05 19:56:55 +00:00
b90c4c82d9
Make this actually sort-of-work for 68060 w. disabled FPU (tested), 68LC060,
...
and I suspect, 68LC040 and 68040V machines. Method used:
1. do NOT use the frames effective address at all
2. do NOT use the frames next instruction address, but
3. restore the "this instruction" pc into the pc field of the frame at the
beginning of the emulation, if we got a frame format 4.
TODO:
A. find the bug in the usage of the frame EA, and revert to using it.
B. find the bug in the usage of the frames next instruction address, and
consider whether it's worthwhile to use it.
C. make the emulation complete.... FEXP FETOM1, and the trigonometric functions
are missing.
2001-01-05 19:54:30 +00:00
8303e98e40
Fix typo (s/req/reg/).
2001-01-05 19:08:04 +00:00
651aeb5899
don't let "make all" fail
2001-01-05 19:01:02 +00:00
6a808ce8c8
Initialize VIA Technologies' 82C686's ICU as if it were a 82C586.
...
This fixes interrupt allocation problems on modern Compaq laptops.
2001-01-05 18:39:12 +00:00
69153b6b36
Run at Ultra/66 on VIA controllers that can do it. PCI vendor/device/revision
...
is the same for the Ultra/33 and Ultra/66 version, so test writability of
the U66 enable bit (idea from Chris Cappuccio).
Thanks to David Carrel for testings.
2001-01-05 18:04:42 +00:00
52f9536913
Add isapnp devices.
...
XXX CS4232 is not probed properly.
2001-01-05 17:55:38 +00:00
d78ca7c54a
Add isapnp attachment for prep.
2001-01-05 17:49:43 +00:00
cbf42ca2d1
Ops, make it compile again.
2001-01-05 15:34:05 +00:00
3950869204
Set Linux version to 2.0.38 for now, until the clone + "real time signal"
...
problems are fixed.
2001-01-05 15:31:15 +00:00
5c800a0dab
Add support for Ultra/100 on intel ICH2; from Tomokazu HARADA in kern/11747.
2001-01-05 15:29:39 +00:00
2a63f0a46c
Add support for Ultra/100 on the HPT370
...
XXX the datasheet for the HPT370 is wrong
While I'm there clear the DRIVE_DMA flag when we're going to use Ultra/DMA
where it was missed, so that wdc_print_modes() only prints what's used.
2001-01-05 15:20:53 +00:00
bjh21