13021b9955
Avoid calling m_pullup in a few places, where not necessary.
1999-09-25 20:43:43 +00:00
ed505bdf67
regen.
1999-09-25 09:48:07 +00:00
9f3378ecd4
Add support for Corega EthernetII PCC T. This diff is submitted
...
as PR#8485 by HEO SeonMeyong.
1999-09-25 09:47:13 +00:00
c999e3ca1a
Add support for the DECchip 21140[A]. This currently only works with
...
boards which use MII for media attachment.
ISV SROM format information lifted from Matt Thomas's `de' driver.
Thanks to Dave Sainty for experimenting w/ his 21140A MII boards, and
for supplying a fix to the MII bit-bang code (PR #8382 ).
1999-09-25 00:27:00 +00:00
45a337e088
Add a PHY `offset' (e.g. "first PHY on bus, second PHY on bus, ...") to
...
the PHY's softc.
1999-09-25 00:10:13 +00:00
c61e95f1f5
Add Tulip ISV-format SROM media block types.
1999-09-24 18:27:22 +00:00
ffe9ca742d
Add 'sfbreg.h' to the list of files installed in /usr/include/dev/tc/.
1999-09-24 01:01:23 +00:00
fcc61fbac4
PR/8443: Yamano-uchi, Hidetoshi: Missing register in IODESC.
1999-09-23 16:09:58 +00:00
9dfb5a91ec
Minor output formatting buglet.
1999-09-23 11:53:13 +00:00
d9abf5e332
Add Game Port definitions.
1999-09-23 11:50:19 +00:00
cef2689773
Oops, we do have to check ourselves whether a given value is valid within an
...
enumeration.
1999-09-23 11:46:12 +00:00
67e874d814
Allow to detach wdc, atapibus, wd and cd.
1999-09-23 11:04:29 +00:00
99024b0423
print newline.
1999-09-22 10:03:37 +00:00
c08940c49b
Fix indentation of close curly brace.
1999-09-22 09:51:03 +00:00
7460a0be93
Set sc_cfg3_fscsi for the AMD53C974 to match the change in ncr53c9x.c.
1999-09-22 03:32:00 +00:00
636de81487
Define config register 3 values for NCR53C9x/FAS216.
...
Add sc_cfg3_fscsi to the softc and use it to set the chip into Fast SCSI
mode for the chips that use it.
1999-09-22 03:31:23 +00:00
3455a353f9
Fix minphys() on vax. While here, convert to bus.h.
1999-09-21 18:07:54 +00:00
e7daddb730
fold long line and kill empty line at the end of file.
1999-09-21 03:39:37 +00:00
31e6da77de
Calculate the correct device minor of the first partition.
1999-09-21 03:10:00 +00:00
6775e175ca
Add a brief delay after resetting the card before checking to see if
...
it's done resetting. Trying to read registers off the card while it's
unresponsive can cause a machine check on some platforms/busses.
1999-09-21 01:04:44 +00:00
30651e46b3
A couple more hacks for the Lite-On PNIC:
...
- Only use 16 longword bursts.
- Reset the interface for receive filter setups that don't come from
the reset path.
Hi, Jason is getting really tired of broken clone chips, and really wishes
real 21140 boards were still available, because the DEC chips seem to work
Just Dandy.
1999-09-21 00:14:54 +00:00
5ada26d247
Remove the has-mii-doesn't-have-mii OPMODE block from tlp_init(), and
...
let the pre-init hook and media switch routines handle it all.
1999-09-20 19:52:31 +00:00
28b026bee1
Remove special-case 2114x-set-OPMODE_MBO; it's done in the pre-init hook
...
now.
1999-09-20 19:34:08 +00:00
664d8da4f5
Add support for the DECchip 21041. This also adds some preliminary
...
support for the ISV SROM format used in the 2114{1,1A,2,3}. Note, like
the 21040, auto-sense is not yet supported for the 21041.
Add a "pre-init" hook, which will be used for the 2114x and PNIC (currently)
which allows chip-specific code to set up and write OPMODE before the
chip is reset. This is necessary in order for the chip's internal
pathways to get initialized properly for MII/SYM/PCS/SIA media attachments.
Thanks to Dave Sainty for the hint from the `de' driver that inspired the
pre-init hook.
1999-09-20 19:26:54 +00:00
6961f081e5
Fix packet reception in promiscuous mode: compare the Ethernet destination
...
address against our station address if it's not a multicast packet. Either
the Rhine manual lies about the phys/broadcast/multicast rxstatus bits,
or the Rhine chip is just broken.
Fixes a redirect storm problem reported by Laine Stump on current-users.
1999-09-20 17:40:58 +00:00
1f50d00cc1
Add one new dispaly type for DEC TC TX 8/24bpp framebuffer. Currently acts
...
as an 8bpp pseudo color device.
1999-09-20 06:29:06 +00:00
3598bf5251
Add NOLUNS quirk for another Texel CD-ROM revision.
1999-09-19 23:45:28 +00:00
598dcad691
When moving the software cursor on an inactive screen, save character and
...
attribute from backing store, not display adapter.
1999-09-19 23:00:04 +00:00
a6d751c35c
One more change for bigendian machines.
1999-09-19 22:58:31 +00:00
97253f4537
Software cursor is not enabled at boot time. Hardware cursor is.
1999-09-19 22:57:24 +00:00
9ac5036f93
Make the DEFPA run under the macppc port (tested on a B&W G3). Add it to
...
the GENERIC config file.
1999-09-19 22:02:37 +00:00
f96e055d70
- mc6845's cursor is disabled by punching bit 6 of cursor start register.
...
- Add new option (PCDISPLAY_SOFTCURSOR) that provides a large, non-blinking
cursor in software.
1999-09-19 21:48:08 +00:00
5485bcb973
Fix a buglet in tlp_reset(): don't touch the Tulip for at least 50
...
PCI cycles after starting the reset; it won't respond. This will
cause a machine check on some Alpha core logic chipsets (e.g. 21071 APECS).
1999-09-19 20:51:09 +00:00
fa13e8eb92
set odd parity for the serial line
...
(done by directly setting zilog chip control bits -- there should be
a zs_set_frame() or so in z8530sc.c)
fixes PR port-alpha/8423 by Konrad Schroder <perseant@hhhh.org>
1999-09-19 14:45:47 +00:00
fb7795c908
Make sure the HC deactivation is propagated.
1999-09-18 11:25:50 +00:00
d1c5384e9a
Minor optimisation.
1999-09-18 09:45:05 +00:00
91723eaf32
Regen.
1999-09-18 01:46:25 +00:00
697eb331c5
Ammend some entries.
1999-09-18 01:46:01 +00:00
9002796d07
If the interface is not marked as running, abort tlp_intr() early.
1999-09-17 21:57:36 +00:00
79f938f5f8
Fix a few buglets in the multi-port 21040 code. ZNYX ZX314 confirmed
...
working now.
1999-09-17 21:55:01 +00:00
54943e8584
- Collapse forward and reverse cases in rasops_copyrows() into one
...
- Pull in opt_rasops.h so we know if clipping is enabled
- Some KNF
1999-09-17 00:22:07 +00:00
da0cbab431
Clean up attribute allocation some more.
1999-09-17 00:09:34 +00:00
97a24aa488
Make defines follow the standard.
1999-09-16 21:53:58 +00:00
61ab682f29
set baudrate before talking to the keyboard (in non-console case)
...
from Konrad Schroder per PR port-alpha/8422
1999-09-16 19:39:05 +00:00
a4457e18b3
More DIAGNOSTIC paranoia.
1999-09-16 19:20:34 +00:00
61cf56ebf2
introduce new variable wsdisplay_defaultscreens (initialized to
...
WSDISPLAY_DEFAULTSCREENS or 0 if it's not defined) and use it instead
of WSDISPLAY_DEFAULTSCREENS as approptiate, so that number of screens
added on bootup is patchable
move printing of info about added screen into separate routine and
print just one message for all screens added in wsdisplay_common_attach(),
such as:
wsdisplay0: screen 1-7 added (80x25, vt100 emulation)
while here, do minor const poisoning
Reviewed by: drochner
Tested by: jdolecek
1999-09-16 18:16:51 +00:00
6c591e77d0
Fix botched RCS IDs.
1999-09-16 05:58:18 +00:00
09774ca21c
Remove one, add none!
1999-09-15 21:14:44 +00:00
2557320246
Handle the case when a USB transfer is so long that it crosses two page
...
(4K) boundaries. OHCI cannot do that with a single TD so we make a chain.
1999-09-15 21:14:03 +00:00
7fcc1703ff
Cosmetic change: s/xfer/data/
1999-09-15 21:12:29 +00:00
80e09c28e9
Use a bigger buffer when transferring data.
1999-09-15 21:11:27 +00:00
58c7de99c1
Move the code around a little and clearly mark how to delay attachment
...
(during cold boot) until the interrupts are on.
1999-09-15 21:10:11 +00:00
5260cadff2
Add a sanity check to the computed actual transfer length.
1999-09-15 21:08:59 +00:00
d4f0eac72e
Change SPLUSBCHECK diagnostic macro a little.
1999-09-15 21:08:19 +00:00
e54df1b10c
Handle the use_polling flag with a lttle more care and only set it if
...
we are cold booting.
1999-09-15 14:17:14 +00:00
60199e09b6
Regen.
1999-09-15 13:57:26 +00:00
df70e460db
Make vendor names more consistent.
1999-09-15 13:57:09 +00:00
adc55421b4
Regen.
1999-09-15 12:31:28 +00:00
f14a3915b3
Add a number of devices and rename a few. From a Linux web site.
1999-09-15 12:30:59 +00:00
7049e8eb1b
Add preliminary (untested) code for detaching the USB host controller
...
(needed for CardBus based controllers).
1999-09-15 10:25:30 +00:00
f23c7a31b4
Make sure 21040 chips are at least pass 2.0 and that 21140 chips are at
...
least pass 1.1.
1999-09-14 23:43:10 +00:00
70997fd3d5
Move the PCI device number to the base Tulip softc; it will be needed to
...
decode the SROM on 21041 and 2114x multi-port boards.
1999-09-14 23:33:04 +00:00
2def4fdb50
Apparently can't really look at excessive collitions and late collisions
...
in completed transmit descriptors. These seem to be set even on successful
packet transmissions on my AlphaStation 500's 21040.
1999-09-14 23:23:32 +00:00
5c34356d4c
First crack at shared ROM/shared interrupts on 21040 multi-port boards,
...
plus quirk identification for non-multiple-port boards.
1999-09-14 22:25:48 +00:00
5486205b69
Regen.
1999-09-14 22:06:44 +00:00
ed9b74f17a
Sort out some confusion about which vendor is really Belkin.
1999-09-14 22:06:21 +00:00
a6aa488db9
Don't do IO before we have set the tag and handle.
1999-09-14 09:29:05 +00:00
e2a320f925
Oops, fix Winbond regshift.
1999-09-14 05:59:53 +00:00
d05d28146b
EISA bus front-end for the New Tulip Driver, for the DEC DE425 EISA
...
board. The DE425 is basically a DECchip 21040 on an EISA board, plus
a Cool Address Decoder Hack which maps the PCI configuration
space registers into EISA I/O space, interleaved with the Tulip CSRs,
which are spaced further apart than on the PCI versoin.
This is currently *untested* until the DE425 boards that folks have
promised me arrive. But, it should work, since the 21040 works.
1999-09-14 05:58:00 +00:00
12c167b5ca
Change the semantics of `sc_regshift'; it is now the shift required to
...
make a CSR index number into a CSR offset. Introduce a couple of macros
to handle CSR name -> offset conversion.
1999-09-14 05:52:21 +00:00
10d4a4d5fe
And commit two files I forgot in the rearrangement for testing for
...
interrupt context.
1999-09-14 01:07:13 +00:00
a03bd733ca
- More PNIC NWAY stuff. Still more work to do, here.
...
- Fix the SROM checksum routine.
- Add code to parse the old DEC Address ROM SROM format.
- Rearrange the statchg routines a bit, to make them consistent with one
another.
- Add support for the DECchip 21040. XXX No support for media autosense
yet, and no support for any of the multi-port boards yet.
1999-09-14 00:55:38 +00:00
c4d6d6b991
Put a reference counter in the softc. Without this the driver might access
...
data that has been freed because the detach() routine returns to early.
1999-09-13 21:35:08 +00:00
ba2c2e2ade
* Make sure an aborted pipe is marked as not running.
...
* Start queued request in the right order.
* Insert some more DIAGNOSTIC sanity checks.
1999-09-13 21:33:25 +00:00
bc5da9a8da
Make sure timeouts count as interrupt context too.
1999-09-13 19:49:41 +00:00
ff6a476e6c
Rearrange the code a little so we can decide if we are in process
...
or interrupt context in a reliable way. Mainly used for DIAGNOSTIC.
1999-09-13 19:18:17 +00:00
65363da25e
Merge in NetBSD/sh3 from cvs.kame.net repository.
...
Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)
Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).
1999-09-13 10:30:21 +00:00
e0042cf412
drop wrongly looped back multicast packet before we put it into BPF.
1999-09-12 18:26:58 +00:00
eadd0f76da
Add needs-flag to ukbd. Fixes PR 8385 from Izumi Tsutsui
...
<tsutsui@ceres.dti.ne.jp>.
1999-09-12 17:40:57 +00:00
b1a719a6cc
Add a flag in the request to determine if the data copying is done by the
...
driver or the usbdi layer.
1999-09-12 08:23:42 +00:00
305998532f
Dot't forget to deactivate subdevices.
1999-09-12 08:21:49 +00:00
febf7ffb86
Display more verbose information about the command protocol and wire
...
protocol used by the device, e.g.:
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Iomega USB Zip 100, rev 1.00/1.00, addr 2
umass0: SCSI over Bulk-Only (iclass 8/6/80)
1999-09-12 02:40:59 +00:00
f696794a34
Hot-unplug works now.
1999-09-11 21:45:28 +00:00
f77302e768
Implement detaching SCSI and ATAPI disks.
1999-09-11 21:42:58 +00:00
e8dded5513
Implement a function to kill off all commands pending for a given
...
scsipi_link.
1999-09-11 21:39:53 +00:00
5116cf4fa5
Implement detaching of SCSI busses.
1999-09-11 21:25:26 +00:00
f7c20484b6
- If a command fails, assume the device returned CHECK CONDITION status,
...
and issue a REQUEST SENSE. This fixes the media change problems I was
having w/ my USB ZIP drive.
- Clean up some debugging code.
- Implement more hot-unplug stuff.
1999-09-11 20:52:07 +00:00
afa103cfb4
Rewrote error handlers. Now they are solid.
...
Increesed considerably the speed of the driver removing superfluous splbio/splx functions.
1999-09-11 15:34:45 +00:00
ca8281fbcc
Pre-allocate the DMA buffer. This makes the driver slightly more efficient.
1999-09-11 10:40:07 +00:00
98b6524413
* Move DMA buffer allocation to HC independent code.
...
* Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN.
1999-09-11 08:19:26 +00:00
203f000d1a
Regen.
1999-09-11 06:27:36 +00:00
dfbe7449e4
Add ENI SpeedStream.
1999-09-11 06:27:25 +00:00
6a58ae2d93
Regen.
1999-09-10 19:56:51 +00:00
fb9d7d86ae
Add more TI CardBus bridges. Taken from the CardBus patches.
1999-09-10 19:55:54 +00:00
90daa4736b
Comment out the GET_DEVICE_ID code, because for some unknown reason it
...
causes printing to fail sometimes.
1999-09-10 19:28:26 +00:00
f5e553eb57
IPv6 support.
...
ETHERTYPE_IPV6 packets are encapsulated by RFC1042 encap.
Tested with Japanese card, with WaveLan bridge (wiconfig -p 1).
NOTE: I dunno if encapsulating IPv6 packets by RFC1042 is the correct way,
as RFC1042 only defines behavior for ETHERTYPE_{IP,ARP,REVARP} packets.
Since WaveLan bridge encapsulates IPv6 packets with RFC1042, we have no
choice.
Gather joined multicast addresses via SIOCADDMULTI, and configure multicast
filter properly. This is also required for IPv6 support
(which heavily depends on multicast).
Fix IFF_RUNNING management
- to prevent IFF_RUNNING from raised on "wiconfig", before "ifconfig up"
- to prevent the driver from occupying extra interrupts on "ifconfig up",
then "down", then "up".
1999-09-10 00:30:59 +00:00
ebcd1b7a41
Make sure to behave as IFF_SIMPLEX in all cases.
...
Drop multicast/broadcast packet looped back from myself.
This is to cope with SMC91C92 (Megahertz XJ10BT), which
loops back multicast packet to itself on promiscuous mode.
(should be ensured by chipset configuration)
Reviewed by: thorpej
1999-09-10 00:23:34 +00:00
d622281820
Rework the changer driver a bit:
...
- Take note of magazine changes, and enqueue "Element Status Changed" events
that user processes can read or select on.
- Normalize some structure names.
- Report back more status about changer elements:
* Volume tags (e.g. barcode labels on the backs of your tapes)
* External device names (for drive units in a changer)
* Last element a unit of media was moved from
* Sense information for SCSI changer elements in EXCEPT condition
* Vendor-specific data if the user requests it.
- Add support for setting volume tags.
1999-09-09 23:24:11 +00:00
b9627d002f
Add support for Cyclade boards with new Risc II serial controller.
...
Patches supplies by C Kane in PR kern/7175.
1999-09-09 21:52:11 +00:00
057798e505
Snapshot of work-in-progress to support the internal NWay block on
...
the Lite-On PNIC chips. Not finished yet; some other infrastructure
work left to do.
1999-09-09 21:48:18 +00:00
31292f422e
Add a quirk for Wangtec SCSI-36 (QIC-120) tape drive.
...
From Izumi Tsutsiu in PR 8357.
1999-09-09 20:06:52 +00:00
125de40b64
Ambicom support by Vincent Aymeric
1999-09-09 18:12:05 +00:00
a0cbbf08fe
Ambicom support by Vincent Aymeric
1999-09-09 18:09:10 +00:00
6b9aae738e
Update doc URLs and fix a typo in umass_bulk_get_max_lun().
1999-09-09 17:12:03 +00:00
9bebdb616f
Remove some and add some.
1999-09-09 13:05:05 +00:00
8c655e84f2
An EXPERIMENTAL audio driver. It still needs work, e.g., in the mixer
...
part to give reasonable names to the mixer controls.
1999-09-09 12:28:25 +00:00
2aadcb5f47
Change the internal API to allow DMA buffers to be pre-allocated by
...
the device driver instead of happening automagically in the HC driver.
This affects both the HC-USBD interface as well as the USBD-device
interface.
This change will allow DMA buffers to be reused e.g. in isochronous
traffic.
Add isochronous support to the UHCI driver (not for OHCI yet).
1999-09-09 12:26:43 +00:00
a85a08c2fb
Add support for detaching audio devices.
1999-09-09 10:24:39 +00:00
4efecd1291
The nca.c probe routine falsely claims i82595tx chips to itself.
...
Move it to after the iy driver.
1999-09-09 09:54:08 +00:00
633408472b
Use bus_dmamap_load() to obtain 128KB chunk for LANCE merging codes from
...
NetBSD/alpha. Tested ok with DEC3000 and DECstation.
1999-09-09 06:33:38 +00:00
a10045109d
Add chip types for several more Tulip clones (ASIX, ADMtex, PNIC II, Davicom),
...
and match the Compex RL100-ATX; it uses the Winbond 89C840F (RL100-TX is
a Macronix 98713).
1999-09-08 22:29:46 +00:00
e0c4f8ff92
Regen.
1999-09-08 22:25:56 +00:00
dfdd1affb4
Add some more Tulip clones.
1999-09-08 22:25:19 +00:00
ab08b6b863
Update for Lite-On product ID change.
1999-09-08 21:42:44 +00:00
ab7310ed6e
Regen.
1999-09-08 21:39:54 +00:00
9bb30be866
Add Davicom Semiconductor vendor ID, and Davicom DM9102 10/100 Etherent
...
product ID (Yet Another Tulip Clone).
1999-09-08 21:39:24 +00:00
187510560e
Regen.
1999-09-08 21:34:33 +00:00
46e11c9fd8
LITEON_PNIC -> LITEON_82C168
1999-09-08 21:33:59 +00:00
fe5b29ca42
Nuke unused prototype.
1999-09-08 02:01:55 +00:00
6913f83874
A useful discussion with Jason convinced me that I had selected the
...
wrong tag as the default tag to use- we should use ORDERED, no SIMPLE.
1999-09-07 22:54:45 +00:00
60feba0646
Spacing.
1999-09-07 21:52:06 +00:00
cc8ca41376
Install *reg.h
1999-09-07 21:51:49 +00:00
211476aea7
Match 1460 names with Adaptec.
1999-09-07 19:30:10 +00:00
5c44dfbe6a
Note 78Q2121.
1999-09-07 19:29:52 +00:00
977c927d44
Do a brain dump of items to do.
1999-09-07 14:58:12 +00:00
a4b7a96e0e
Do not complain in sbfind() if another driver has mapped the registers.
1999-09-07 00:49:41 +00:00
12bad24883
Add opl at wss for isapnp devices w/o MAD chip.
1999-09-06 18:31:45 +00:00
6e6d511cf0
Add USUBCLASS_MIDISTREAM definition, per request from MAEKAWA Masahide
...
<bishop@rr.iij4u.or.jp>.
1999-09-06 17:16:47 +00:00
ff962e992b
Add mode 3 support for newer CS423X chips. Modify probe to correctly
...
distinguish between CS4236, CS4236B, and CS4237B.
1999-09-06 17:07:04 +00:00
2425433ff6
Change some printf to DPRINTF for consistency. From Nick Hibma, FreeBSD.
1999-09-05 21:22:38 +00:00
24251055bc
Change the way the `struct device' base part of all driver softc are
...
declared and accessed to make it more portable. Idea from Nick Hibma, FreeBSD.
No functional changes.
1999-09-05 19:32:18 +00:00
83abb87d9a
Garbage collect more unused stuff.
1999-09-05 03:05:55 +00:00
9c01870db1
Remove more unused stuff.
1999-09-05 02:54:09 +00:00
cfbdda8843
Garbage collect some more stuff.
1999-09-05 02:24:58 +00:00
6158faa69d
Cleanup a bit more.
1999-09-05 01:58:11 +00:00
e57673d0d4
Remove one of the two bzero calls in RF_Calloc -- the 2nd one doesn't
...
buy us anything at all.
1999-09-05 01:46:35 +00:00
57f7d3320b
Add driver for the TDK Semiconductor 78Q2120 PHY.
1999-09-05 01:26:02 +00:00
e0bcd7a71a
TDK Semiconductor 78Q2120 PHY, commonly used in low-power Cardbus cards.
1999-09-05 00:48:01 +00:00
b8e941e9b0
Add PHY driver the the Intel 82553 found on some fxp's.
...
Some variants of this chip need a little extra MII fix before
being usable, so this is not yet put into GENERIC's.
1999-09-05 00:40:27 +00:00
0151ffe3d6
Regenerate.
1999-09-04 23:59:32 +00:00
6624cc41e9
Add Intel 82553 and TSC 78Q2120.
1999-09-04 23:58:55 +00:00
f3421bec94
Change the way the direction is extracted from the endpoint descriptor.
...
No functional changes to the drivers. From Nick Hibma, FreeBSD.
1999-09-04 22:26:11 +00:00
e1766aacfa
Make sure not to use the io handle before it's been initialized.
1999-09-04 22:00:32 +00:00
d8144e5848
More cleanup of unused stuff. This time we nuke a bunch of memory
...
allocation stuff.
1999-09-04 21:11:21 +00:00
cfd861fcd8
Minor cleanup of (now) unneeded RF_UTILITY checks.
1999-09-04 16:26:30 +00:00
56a01be374
Fix tyop in a comment.
1999-09-04 09:41:15 +00:00
6a2319b969
Byte swap the EEPROM words on the PNIC. From Stephen Ma.
1999-09-03 00:24:56 +00:00
8386184524
Deal with some more Winbond differences, after a more-thorough-than-before
...
reading of its manual.
1999-09-02 23:25:28 +00:00
533b6088cd
Make it compile.
1999-09-02 23:23:03 +00:00
d7a4829d27
Regen.
1999-09-02 22:07:43 +00:00
is