- move rx/tx xfer flags into usbnet_cdata
- move the callbacks into usbnet_ops structure
- move rx/tx xfer flags arguments from usbnet_init_rx_tx()
and move them all into usbnet_attach() arguments
- s/miibus/mii/ in some places for consistency
other clean up:
- create wrapper functions for callbacks, move knowledge about
special handling (OK to be missing, error eating) there.
- use cdata pointer if already available
- provide some more macros (will be real functions later) for
accessing usbnet members, use existing ones more
bump kernel version.
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
- Return whether it removed task from queue or not.
. True if it was on the queue and we intercepted it before it ran.
. False if we could not intercept it: either it wasn't queued,
or it already ran. (Up to caller to distinguish these cases.)
- Pass an optional interlock like callout_halt.
While here, simplify.
ok mrg@
compatibility with BIOC[GS]SEESENT ioctl. The userland interface is the same
as FreeBSD.
This change also fixes a bug that the direction is misunderstand on some
environment by passing the direction to bpf_mtap*() instead of checking
m->m_pkthdr.rcvif.
Audit the flags to usbd_create_xfer so that USBD_FORCE_SHORT_XFER is
supplied wherever such a transfer is setup. We can drop
USBD_SHORT_XFER_OK as it has not bearing on number of TDs
The benefits of the change are:
- We can reduce codes
- We can provide the same behavior between drivers
- Where/When if_ipackets is counted up
- Note that some drivers still update packet statistics in their own
way (periodical update)
- Moved bpf_mtap run in softint
- This makes it easy to MP-ify bpf
Proposed on tech-kern and tech-net
The API is used to set (or reset) a received interface of a mbuf.
They are counterpart of m_get_rcvif, which will come in another
commit, hide internal of rcvif operation, and reduce the diff of
the upcoming change.
No functional change.
- API / infrastructure changes to support memory management changes.
- Memory management improvements and bug fixes.
- HCDs should now be MP safe
- conversion to KERNHIST based debug
- FS/LS isoc support on ehci(4).
- conversion to kmem(9)
- Some USB 3 support - mostly from Takahiro HAYASHI (t-hash).
- interrupt transfers now get proper DMA operations
- general bug fixes
- kern/48308
- uhub status notification improvements
- umass(4) probe fix (applied to HEAD already)
- ohci(4) short transfer fix
This change intends to run the whole network stack in softint context
(or normal LWP), not hardware interrupt context. Note that the work is
still incomplete by this change; to that end, we also have to softint-ify
if_link_state_change (and bpf) which can still run in hardware interrupt.
This change softint-ifies at ifp->if_input that is called from
each device driver (and ieee80211_input) to ensure Layer 2 runs
in softint (e.g., ether_input and bridge_input). To this end,
we provide a framework (called percpuq) that utlizes softint(9)
and percpu ifqueues. With this patch, rxintr of most drivers just
queues received packets and schedules a softint, and the softint
dequeues packets and does rest packet processing.
To minimize changes to each driver, percpuq is allocated in struct
ifnet for now and that is initialized by default (in if_attach).
We probably have to move percpuq to softc of each driver, but it's
future work. At this point, only wm(4) has percpuq in its softc
as a reference implementation.
Additional information including performance numbers can be found
in the thread at tech-kern@ and tech-net@:
http://mail-index.netbsd.org/tech-kern/2016/01/14/msg019997.html
Acknowledgment: riastradh@ greatly helped this work.
Thank you very much!
before invoking xfer callbacks on this pipe.
- Add an extra flags parameter to usb_init_task. If USBD_TASKQ_MPSAFE is not
present, acquire KERNEL_LOCK before invoking the task callback.
1) Move core entropy-pool code and source/sink/sample management code
to sys/kern from sys/dev.
2) Remove use of NRND as test for presence of entropy-pool code throughout
source tree.
3) Remove use of RND_ENABLED in device drivers as microoptimization to
avoid expensive operations on disabled entropy sources; make the
rnd_add calls do this directly so all callers benefit.
4) Fix bug in recent rnd_add_data()/rnd_add_uint32() changes that might
have lead to slight entropy overestimation for some sources.
5) Add new source types for environmental sensors, power sensors, VM
system events, and skew between clocks, with a sample implementation
for each.
ok releng to go in before the branch due to the difficulty of later
pullup (widespread #ifdef removal and moved files). Tested with release
builds on amd64 and evbarm and live testing on amd64.
USB_MATCH(), et cetera. These files produce the same assembly
(according to objdump -d) before and after the change, except for
if_cue.c where two adjacent instructions inexplicably change order.
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
1. expand the USB_ATTACH_SETUP macro (requested by jmcneill)
2. reorder the attach function so that the first thing it does is print
newlines.
3. after this, we can call usbd_devinfo_alloc(), which polls the device
allowing a context switch, and aprint_normal() the device information.
this avoids problems where autoconf messages are getting mixed up.
handling, ether_mediastatus() and ether_mediachange(). Check for
a non-ENXIO error return from mii_mediachg(). (ENXIO indicates
that a PHY is suspended.)
This patch shrinks the source code size by 979 lines. There was
a 5100-byte savings on the NetBSD/i386 kernel configuration, ALL.
I have made a few miscellaneous changes, too:
gem(4): use LIST_EMPTY(), LIST_FOREACH().
mtd(4): handle media ioctls, for a change!
axe(4): do not track link status in sc->axe_link any longer
nfe(4), aue(4), axe(4), udav(4), url(4): do not reset all PHYs
on a change of media
Except for the change to mtd(4), no functional changes are intended.
XXX This patch affects more architectures than I can feasibly
XXX compile and run. I have compiled macppc, sparc64, i386. I
XXX have run the patches on i386 boxen with bnx(4) and sip(4).
XXX Compiling and running on evbmips (MERAKI, ADM5120) is in
XXX progress.
Add if_set_sadl() that both sets the link-layer address length and
replaces the current link-layer address with a new one, and use it
throughout the tree.
matching (and handling) a whole device and those which match an
interface only. This will allow to enforce some rules, eg that
the former don't use interface information for matching or that the
latter don't modify global device state.
The previous way left too much freedom do the drivers which led to
inconsistencies and abuse.
For now, I've not changed locators and submatch rules, this will
happen later.
There should not be any change in behaviour, except in the case of
some drivers which did behave inconsistently:
if_atu, if_axe, uep: matched the configured device in the interface
stage, but did configuration again. I've converted them to match
in the device stage.
ustir, utoppy: matched in the interface stage, but only against
vendor/device information, and used any configuration/interface
without checking. Changed to match in device stage, and added
some simple code to configure and use the first interface.
If you have one of those devices, please test!
