* For sparc64 and amd64, define *SIZ32 VM constants.
* Add a new function pointer to struct emul, pointing at a function
that will return the default VM map address. The default function
is uvm_map_defaultaddr, which just uses the VM_DEFAULT_ADDRESS
macro. This gives emulations control over the default map address,
and allows things to be mapped at the right address (in 32bit range)
for COMPAT_NETBSD32.
* Add code to adjust the data and stack limits when a COMPAT_NETBSD32
or COMPAT_SVR4_32 binary is executed.
* Don't use USRSTACK in kern_resource.c, use p_vmspace->vm_minsaddr
instead (emulations might have set it differently)
* Since this changes struct emul, bump kernel version to 3.99.2
Tested on amd64, compile-tested on sparc64.
sys/kern/exec_aout.c back in *1995*, apparently the line from my
license notice:
* must display the following acknowledgement:
was accidentally dropped. This mistake was propagated into
hpux_exec_aout.c when it was split out of hpux_exec.c.
(Thanks to hubertf for noticing!)
exec case, as the emulation already has the ability to intercept that
with the e_proc_exec hook. It is the responsability of the emulation to
take appropriaye action about lwp_emuldata in e_proc_exec.
Patch reviewed by Christos.
so that a specific emulation has the oportunity to filter out some signals.
if sigfilter returns 0, then no signal is sent by kpsignal2().
There is another place where signals can be generated: trapsignal. Since this
function is already an emulation hook, no call to the sigfilter hook was
introduced in trapsignal.
This is needed to emulate the softsignal feature in COMPAT_DARWIN (signals
sent as Mach exception messages)
and make the stack and heap non-executable by default. the changes
fall into two basic catagories:
- pmap and trap-handler changes. these are all MD:
= alpha: we already track per-page execute permission with the (software)
PG_EXEC bit, so just have the trap handler pay attention to it.
= i386: use a new GDT segment for %cs for processes that have no
executable mappings above a certain threshold (currently the
bottom of the stack). track per-page execute permission with
the last unused PTE bit.
= powerpc/ibm4xx: just use the hardware exec bit.
= powerpc/oea: we already track per-page exec bits, but the hardware only
implements non-exec mappings at the segment level. so track the
number of executable mappings in each segment and turn on the no-exec
segment bit iff the count is 0. adjust the trap handler to deal.
= sparc (sun4m): fix our use of the hardware protection bits.
fix the trap handler to recognize text faults.
= sparc64: split the existing unified TSB into data and instruction TSBs,
and only load TTEs into the appropriate TSB(s) for the permissions.
fix the trap handler to check for execute permission.
= not yet implemented: amd64, hppa, sh5
- changes in all the emulations that put a signal trampoline on the stack.
instead, we now put the trampoline into a uvm_aobj and map that into
the process separately.
originally from openbsd, adapted for netbsd by me.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
memory fault handler. IRIX uses irix_vm_fault, and all other emulation
use NULL, which means to use uvm_fault.
- While we are there, explicitely set to NULL the uninitialized fields in
struct emul: e_fault and e_sysctl on most ports
- e_fault is used by the trap handler, for now only on mips. In order to avoid
intrusive modifications in UVM, the function pointed by e_fault does not
has exactly the same protoype as uvm_fault:
int uvm_fault __P((struct vm_map *, vaddr_t, vm_fault_t, vm_prot_t));
int e_fault __P((struct proc *, vaddr_t, vm_fault_t, vm_prot_t));
- In IRIX share groups, all the VM space is shared, except one page.
This bounds us to have different VM spaces and synchronize modifications
to the VM space accross share group members. We need an IRIX specific hook
to the page fault handler in order to propagate VM space modifications
caused by page faults.
- Switch all m68k-based ports over to __HAVE_SYSCALL_INTERN.
- Add systrace glue.
- Define struct mdproc in <m68k/proc.h> instead of <machine/proc.h>.
(They were all defined exactly the same anyway, other than a couple
of the MDP_* flags.)
format specific.
Struct emul has a e_setregs hook back, which points to emulation-specific
setregs function. es_setregs of struct execsw now only points to
optional executable-specific setup function (this is only used for
ECOFF).
Async I/O OS specifities should now handled in OS specific code. Linux
has been done, but other emulation should be handled. See case LINUX_F_SETFL
in sys/compat/linux/common/linux_file.c:linux_sys_fcntl() for more details.
The data that has been collected yet:
Net Free Open Linux SunOS AIX OSF1 Darwin
send SIGIO to write end of pipe Y N N N N N Y Y
send SIGIO to read end of pipe Y Y N N N ? Y ?
send SIGIO to write end of socket Y Y Y N N Y Y Y
send SIGIO to read end of socket Y Y Y Y Y ? Y ?
* __HAVE_SYSCALL_INTERN. If this is defined, e_syscall is replaced by
e_syscall_intern, which is called at key places in the kernel. This can be
used to set a MD syscall handler pointer. This obsoletes and replaces the
*_HAS_SEPARATED_SYSCALL flags.
* __HAVE_MINIMAL_EMUL. If this is defined, certain (deprecated) elements in
struct emul are omitted.
*_emul_path variables
change macros CHECK_ALT_{CREAT|EXIST} to use that, 'root' doesn't need
to be passed explicitly any more and *_CHECK_ALT_{CREAT|EXIST} are removed
change explicit emul_find() calls in probe functions to get the emulation
path from the checked exec switch entry's emulation
remove no longer needed header files
add e_flags and e_syscall to struct emul; these are unsed and empty for now
* move all exec-type specific information from struct emul to execsw[] and
provide single struct emul per emulation
* elf:
- kern/exec_elf32.c:probe_funcs[] is gone, execsw[] how has one entry
per emulation and contains pointer to respective probe function
- interp is allocated via MALLOC() rather than on stack
- elf_args structure is allocated via MALLOC() rather than malloc()
* ecoff: the per-emulation hooks moved from alpha and mips specific code
to OSF1 and Ultrix compat code as appropriate, execsw[] has one entry per
emulation supporting ecoff with appropriate probe function
* the makecmds/probe functions don't set emulation, pointer to emulation is
part of appropriate execsw[] entry
* constify couple of structures
A fair bit of this, the m68k core dump and exec goo, can probably be
made into a generic m68k hpux module, eventually.
More to be placed in hpux_machdep.c - keep your eyes peeled...
* It compiles (and links).
* Make use of "/emul/hpux" where applicable.
* Untangle a bit, pulling some funtions from the monolithic
hpux_compat.c into hpux_file.c, hpux_exec.c, etc.
* Fix a couple of bugs.
Yet to do:
* Move hp300-specific functions into hp300/hp300/hpux_machdep.c.
* Make everything work properly (you laugh...)
These changes are sufficient to run some simple HP-UX 9.x executables,
including ls(1) (which will read password and group information from the
YP server correctly, albeit slowly), a simple "hello world", uname(1),
and a few other odds and ends. Dynamically linked executables work, and
demand-paging _seems_ to work properly. Major problems:
* socket and/or signal handling appears to need some work yet.
* 99% sure I didn't do exactly the right thing adjusting for the
fact that "kstack" is gone now.
* ktrace(1)'ing some executables (HP-UX telnet(1) is what I tried)
causes the HP-UX executable to dump core with a SIGSEGV for an
as of yet unknown reason.
This is mostly meant as a checkpoint/snapshot, to make it easier for others
to track progress on this code, and hack on it themselves. It's certainly
better off now than before.
christos