4e9e8e52f4
Change the test to check if transfers are done. The old test was broken
...
and sometimes reported transfers as done prematurely.
This fix seems to stabilize the Ethernet drivers.
2000-01-28 00:15:54 +00:00
3c27de72ac
Fix typo in tailp bit defines. From Nick Hibma.
2000-01-28 00:11:38 +00:00
10dd6e61c3
Regen.
2000-01-28 00:09:19 +00:00
d4dda219e1
Fix typo.
2000-01-28 00:08:57 +00:00
c74e0a8db2
Add detachment support to the MII layer.
2000-01-27 16:44:30 +00:00
cf83f4ae57
Use delay by default on hpcmips for now.
2000-01-27 01:05:17 +00:00
e00a11df5e
Make it easy to switch between using attribute memory and not.
2000-01-26 22:28:38 +00:00
b1ec3fa901
Give the ISV filter a chance to verify 21143 pass 4.1 SROMs before running
...
them through the quirk table.
2000-01-26 16:51:11 +00:00
063cb5e5dc
Additional hackery for the Cobalt interfaces. Even though these are
...
pass 4.1 21143s, they have a 128-byte SROM, and thus use a different
SROM address size than all other pass 4.1 21143s.
A plea to hardware designers -- *please* read application notes for
the components you're using before putting your hardware together. Thanks.
2000-01-26 15:50:52 +00:00
57d2439d74
Try to avoid accessing the HC if it is dead. Suggested by mycroft.
2000-01-26 10:04:38 +00:00
653eefc8f4
Add cardbus detach functionality. Add a function
...
cardbus_detach_card() in cardbus.c and enable detach code in cardslot.c
2000-01-26 09:04:59 +00:00
639bd74d21
Pccbb manages interrupt handlers by itself for its child device.
2000-01-26 09:02:41 +00:00
4656f0ba52
Remove the FreeBSD support from this file. It hasn't worked in FreeBSD
...
for some time, and only made the code harder to read.
2000-01-26 06:41:11 +00:00
422cc09430
First attempt at a CardBus front-end for the `ahc' driver. This will
...
support the Adaptec ADP-1480 CardBus SCSI cards, which are a stright
AIC-7860 implementation.
2000-01-26 06:37:23 +00:00
494b4a9ed3
Fix an oversight in the AIC-7xxx SEEPROM split.
2000-01-26 06:27:32 +00:00
a697dac5f2
Back out a change I didn't intend to commit.
2000-01-26 06:17:59 +00:00
8949eab0cb
Split the code that reads the SEEPROM into its own file.
2000-01-26 06:04:37 +00:00
3d3f376619
Print out what kind of card it is earlier and more accurately.
2000-01-26 02:25:47 +00:00
dc4e418fa6
Add the Linksys Etherfast 10/100. These are currently being rebadged
...
as the NetGear FA410TX 16-bit PC Card.
2000-01-26 01:27:12 +00:00
62c4800e7f
Argh - add initialization that got lost during editing of previous addition.
2000-01-26 01:23:32 +00:00
def54ed969
Regen.
2000-01-26 01:06:03 +00:00
a73e3e37b1
Add the Linksys Etherfast.
2000-01-26 01:05:23 +00:00
2bd8866643
"i/o" -> "memory"
2000-01-25 23:23:48 +00:00
1f723151f2
use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
...
PCI BAR bit is referred to
2000-01-25 22:32:20 +00:00
7360584deb
use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
...
PCI BAR bit is referred to
(XXX is the hack still necessary?)
2000-01-25 22:31:06 +00:00
4f1e715248
use BUS_SPACE_MAP_PREFETCHABLE instead BUS_SPACE_MAP_CACHEABLE where the
...
PCI BAR bit is referred to
2000-01-25 22:30:04 +00:00
62fb37ba49
Some changes for the Xircom X3201-3 in 21143 emulation mode:
...
- The Xircom doesn't bring itself out of reset; we have to do it.
- The Xircom requires transmit buffers to be aligned to 4 bytes, too.
Partially from Rafal Boni (though the Tx buffer alignment issue is
handled much differently in this version).
2000-01-25 22:11:12 +00:00
27cb56c54d
Regen.
2000-01-25 21:58:59 +00:00
8b39eb4d8e
Add Digi International adapters.
2000-01-25 21:58:45 +00:00
a81c1788ab
Regen.
2000-01-25 21:58:23 +00:00
3a9b991c44
Add Lexar Media CF.
2000-01-25 21:58:06 +00:00
701cc4b663
Add support for the Xircom X3201-3 in 21143 emulation mode. This chip
...
appears on some Xircom and Intel RealPort(tm) cards.
From Rafal Boni, with some slight modifications from me.
2000-01-25 21:50:30 +00:00
e81d123f6d
try to dtrt for sector sizes <DEV_BSIZE (at least, don't divide by 0)
2000-01-25 20:42:33 +00:00
6dc0e3435d
IFM_1000_FX -> IFM_1000_SX
2000-01-25 20:19:14 +00:00
02af3f45b6
Clean up the SROM addrbits code a little.
2000-01-25 19:53:34 +00:00
da499b1e3a
make the wait_ready loop use pcic_delay() (thus tsleep) too for cards
...
that take a while to become ready
2000-01-25 19:38:18 +00:00
6aca67041c
Add a chip type for the Xircom X3201-3, and centralize the declaration
...
of the chip names array.
2000-01-25 19:29:17 +00:00
3f72e2e3f9
Oops; fix a bug in the previous:
...
If one entry has the DL10019 bit set and another does not, don't fail
immediately if the checksum doesn't work.
2000-01-25 18:04:07 +00:00
b9a4fe55b5
Switch the HSE and HCPE messages. Pointed out my mycroft.
2000-01-25 17:31:05 +00:00
9d17b2ca6a
bring in stabilization codes in freebsd PAO/bsdi cnw driver.
...
- link integrity bit check.
- don't send too many packets, add some delay between them (this one is
not enabled by default - try it if you see performance problem on
heavy traffic)
2000-01-25 16:48:47 +00:00
c02060ba9b
Regen.
2000-01-25 15:44:21 +00:00
d1c481fc31
Fix a typo.
2000-01-25 15:43:59 +00:00
e33c595472
Do a CARDBUS_BM_ENABLE just to be sure.
2000-01-25 15:29:43 +00:00
492bfe70f3
get the device name from pcidevs instead of having a list here
2000-01-25 14:34:24 +00:00
0335569abc
Make it compile even if you leave out the ucom attachment.
2000-01-25 13:56:23 +00:00
a27ee91364
Remove an item.
2000-01-25 13:27:07 +00:00
f0ebd281e5
Add done method for root control transfers.
2000-01-25 12:06:21 +00:00
73ce2abd33
Make sure PIRQD enable bit is set. From FreeBSD.
2000-01-25 11:26:06 +00:00
dccf05f858
Do pccbb_chipinit() after YENTA register space allocation.
...
Add TI PCI 1451 PCI-CardBus entry.
2000-01-25 09:36:43 +00:00
b1f85ee905
Don't put leading space, otherwise diskerr() prints unnecessary space
...
like this:
wd0h: aborted command reading fsbn 650256 of 650256-650271 (wd0 bn 839056; cn 888 tn 13 sn 17), retrying
2000-01-25 09:33:12 +00:00
augustss