cc0b3cc208
Add support for Pegasus II adapters (from Linux).
...
Add a bunch of adapters.
2001-07-16 18:33:13 +00:00
3daa873a7e
Regen.
2001-07-16 18:31:19 +00:00
fc8666f1da
Some line permutations.
2001-07-16 18:31:00 +00:00
87791333ae
Reorganize the table of adapters slightly.
2001-07-16 16:15:12 +00:00
81f5c58b58
If we're closing the last partition on a RAID set and the system is
...
being shutdown, then unconfigure the RAID set too. This fixes a number
of issues with doing proper unconfigures/shutdowns of multi-level RAID
sets.
Thanks to Jason Thorpe and Bill Squier for the ideas/suggestions on
how/where to do this, and to Bill Squier for testing.
2001-07-16 15:50:27 +00:00
f82d5c6424
Regen.
2001-07-16 15:39:22 +00:00
e71f79ca0b
Add a bunch of ADMtek Ethernet adapters.
2001-07-16 15:38:48 +00:00
298ec741b8
Alphabetize.
2001-07-16 13:54:23 +00:00
5d1d09b8fb
Alphabetize.
2001-07-16 13:49:20 +00:00
bd538b438b
Regen.
2001-07-16 05:04:51 +00:00
f4d7e2e9d6
Add SOHOware NUB100. From OpenBSD.
2001-07-16 05:04:29 +00:00
99e8b114e0
So, the PowerStorm 4d20 a.k.a. 32bit TGA2 w/ IBM RGB561 RAMDAC was causing
...
the kernel to panic since it is recognised as a TGA and the TGA driver
doesn't [yet] know what to do with it.
This patch fixes that by:
o making tgamatch() try to actually figure out what kind
of TGA card is there, rather than simply relying on the
vendor/product ids.
o creating a tga_cnmatch() so that the console code in
arch/alpha/pci/pci_machdep.c can cause the same to occur.
o breaking up some of tga_getdevconfig() into a few different
functions to re-use code that would have been duplicated.
o changed arch/alpha/pci/pci_machdep.c so that it calls out
to tga_cnmatch() if DEVICE_IS_TGA() matches before it decides
to attach the console as a TGA.
Addresses PR: port-alpha/12923
2001-07-16 00:55:16 +00:00
047e3dd5d8
When reporting an ICR value, use bitmask_snprintf to
...
give a human-readable description of the value.
2001-07-15 16:32:40 +00:00
c399f05222
scsipi_set_xfer_mode(): issue a ADAPTER_REQ_SET_XFER_MODE request to adapter
...
only if we succesfully attached at last one device for this I_T.
2001-07-13 20:00:23 +00:00
9879757a53
disable framebuffer drawing while suspending.
2001-07-13 10:23:41 +00:00
993f9377b8
disable the function if attach fails.
2001-07-13 03:09:39 +00:00
41a68e94a9
Driver for the Level One LXT-1000 10/100/1000 PHY.
2001-07-12 21:54:40 +00:00
be71426b74
Regen; Add LXT-1000, clean up.
2001-07-12 21:25:31 +00:00
6e65eb3c21
Add LevelOne LXT-1000 10/100/1000 PHY, clean up some Gig-E
...
PHY names.
2001-07-12 21:25:07 +00:00
aef9e7bea3
Code to handle generic ten-bit interfaces (1000BASE-{LX,SX} fiber
...
interfaces).
2001-07-12 18:49:38 +00:00
0e863b15a6
Driver for the Marvell 88E1000 ``Alaska'' 10/100/1000 PHY.
2001-07-12 17:30:45 +00:00
39928114d6
Regen; corrected Marvell entries.
2001-07-12 17:29:49 +00:00
511aa23898
Correct Marvell OUI, and 88E1000 model number.
2001-07-12 17:29:18 +00:00
05be817d7b
Call clmpcc_init() when setting up the console to get the chip into
...
a known state.
For some reason, "Bug" on mvme68k can't be relied upon to leave it
in a good enough state for our console routines...
2001-07-12 17:21:01 +00:00
981c2a6401
Rearrange register dump when the controller is dying. Fixes PR 13430.
2001-07-11 14:11:00 +00:00
0b1849a71a
don't try to print pcitag_t values; these are opaque values that should not
...
be interpreted by MI code.
2001-07-11 08:36:46 +00:00
eb7db20548
Don't reset twice.
2001-07-11 04:53:48 +00:00
c0e4279dad
Minor formatting fix.
2001-07-11 04:53:18 +00:00
e352032894
Regen.
2001-07-11 03:38:04 +00:00
0f983514e6
Add a remote control from Keyspan.
2001-07-11 03:37:41 +00:00
efc5309185
add devices: ipaqbus,ipaqlcd,ipaqpcic
...
remove device: sagpcic
2001-07-10 18:20:06 +00:00
bed2ac704f
Bug fix: call extent_subregion() with alignment = 1 instead of 0.
2001-07-10 10:33:55 +00:00
864f123d5a
add a missing newline in a printf.
2001-07-10 00:36:36 +00:00
3e747f67fa
regen
2001-07-09 06:58:26 +00:00
2646db5158
add product code for 3Com 3CRWE62092A Wireless LAN
...
(what is the sorting rule for the file?)
2001-07-09 06:57:59 +00:00
340a8b97ca
Add hpcarm devices sagpcic
2001-07-09 03:51:59 +00:00
3f6eb8677a
When we initialize the ARC BIOS, fetch the system ID structure
...
fields into local copies, as well as the Identifier string from
the System component.
2001-07-08 23:57:09 +00:00
9d1d1b8a89
Make the field names in the system ID structure match the spec.
2001-07-08 23:56:03 +00:00
d93e047b19
Add routines to walk the ARC BIOS component tree.
2001-07-08 22:57:10 +00:00
e379ce3db0
Initial pass a ARC BIOS code that can be shared between the sgimips
...
and arc ports.
2001-07-08 19:58:02 +00:00
cc0b68092e
Correct various misspellings of 'transfer' and inflected forms.
2001-07-08 18:06:42 +00:00
3d98de578f
Remove unnecessary include files. From Onno van der Linden.
2001-07-08 17:55:50 +00:00
fa91d59528
Remove unnecessary include files, from Onno van der Linden.
2001-07-08 17:52:02 +00:00
bc5d06ea08
Some cosmetic shuffling.
2001-07-08 17:15:45 +00:00
9de94b45cc
Fix a very, very dumb mistake that broke multicast on the dp83815
...
and dp83820.
2001-07-08 16:56:50 +00:00
62794086ea
Change the structure of dp83815_set_filter ever so slightly.
2001-07-07 17:37:39 +00:00
c8b4ac1b17
bcopy -> memcpy
...
bzero -> memset
2001-07-07 17:04:01 +00:00
4953d4e85f
bzero -> memset
2001-07-07 16:51:47 +00:00
6c248b757c
bcmp -> memcmp
2001-07-07 16:50:41 +00:00
3a235c46fa
bcopy -> memcpy
2001-07-07 16:50:14 +00:00
augustss