pci_attach_args *" instead of from four separate parameters which in
all cases were extracted from the same "struct pci_attach_args".
This both simplifies the driver api, and allows for alternate PCI
interrupt mapping schemes, such as one using the tables described in
the Intel Multiprocessor Spec which describe interrupt wirings for
devices behind pci-pci bridges based on the device's location rather
the bridge's location.
Tested on alpha and i386; welcome to 1.5Q
XXX if you have libc after citrus locale import, please recompile libc,
and your applications that use mbstate_t (rather rare). really sorry
for the mess.
only signal handler array sharable between threads
move other random signal stuff from struct proc to struct sigctx
This addresses kern/10981 by Matthew Orgass.
Just like any ISA device, if you don't have the device at the configured IRQ,
you could lose if something else decides it wants that IRQ. wss is not
a special case.
shared FreeBSD binaries coredump.
This solves port-i386/11708 by Atsushi Onoe.
XXX it may be worth it to split FreeBSD syscall code off syscall.c similar way
XXX as other emulations
GENERIC is the kernel used on new installs and too many things overlap the
resources (irq mostly) the default isa version may be using which causes
panics on reboot.
returns for floppy controllers i/o ports. i.e.
1. 1 range of length 4 (which conveniently "forgets" the ctl i/o port),
2. 2 ranges: 1 of length 4 and the ctl i/o port.
3. 1 range of length 6 which goes to the end of the ctl i/o.
Make this line up with the MI fdc code by mapping in a range of 4 on the
base i/o and then either direct or submapping the ctl i/o. In the one case
where the BIOS lies and says it's not there just map it in anyways. (but note
the fact to the end user).
This is very adhoc work for IETF meeting.
- Since it seems that 'an' and 'wi' have similar hardware, low level
functions should be shared.
- There are PCI/ISA cards of Aironet but not supported yet.
- The wiconfig interface is changed so that wiconfig cannot be used.
- 'ancontrol' of FreeBSD is not ported.
- Only infrastructure mode is tested.
- WEP is not supported.
Though I only have an Aironet card, Cisco card should be expected to work.
* __HAVE_SYSCALL_INTERN. If this is defined, e_syscall is replaced by
e_syscall_intern, which is called at key places in the kernel. This can be
used to set a MD syscall handler pointer. This obsoletes and replaces the
*_HAS_SEPARATED_SYSCALL flags.
* __HAVE_MINIMAL_EMUL. If this is defined, certain (deprecated) elements in
struct emul are omitted.
defined, call addupc_intr() directly from statclock() in the system time case,
using the same P_OWEUPC path if the copyin/copyout fails.
Use this in i386 to remove profiling code from the normal userret() path.
this should improve speed of emulation syscall path (avoids one function call,
and emulations syscall can use the trapframe trick)
Idea: Charles Hannum
Remove the EMUL_HAS_SYS___syscall test, because the handler is no longer shared
with SVR4.
Rather than comparing with e_nsysent, just mask the value. This is only done
to protect us from malicious programs anyway.
Also, there is no reason to save the original PC; there are no restartable
syscalls that change the PC -- and even if there were, they wouldn't do it
in the restart case.
* move all exec-type specific information from struct emul to execsw[] and
provide single struct emul per emulation
* elf:
- kern/exec_elf32.c:probe_funcs[] is gone, execsw[] how has one entry
per emulation and contains pointer to respective probe function
- interp is allocated via MALLOC() rather than on stack
- elf_args structure is allocated via MALLOC() rather than malloc()
* ecoff: the per-emulation hooks moved from alpha and mips specific code
to OSF1 and Ultrix compat code as appropriate, execsw[] has one entry per
emulation supporting ecoff with appropriate probe function
* the makecmds/probe functions don't set emulation, pointer to emulation is
part of appropriate execsw[] entry
* constify couple of structures
This was not added also to other config files primarily because the
driver is not properly tested yet; this entry is primarily meant as an example
for those brave souls who want to try moxa.
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
cpuid instruction, which is used to differentiate between Celeron, common PIII
and PIII Xeon; recognize it and print appropriate info if applicable
Information taken from Intel's (R)
Intel Processor Identification and the CPUID Instruction, AP-485
in port-i386/11502, with only sligh change for Coppermine entry -
cpus with family 6, model 8 are not all Celerons, they can be
either common PIII, Xeon or Celeron
Current status:
Only OHCI chip is supported (fwohci).
ping (IPv4) works with Sony's implementation (SmartConnect) on Win98.
sometimes works but not stable.
Not implemented yet:
IRM (Isochronous Resource Manager) functionality.
Link layer fragmentation.
Topology map.
More to do:
clean ups
MCAP
charactor device part
dhcp
There is no entry in GENERIC config file yet.
Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
type in biosdiskopen(), and if it is of type FS_RAID, add 64 to d->b_off.
NOTE: installboot(8) still needs some hacking to DTRT, but at least this way
if you can load "/boot" off another partition (e.g, wd0h), then wd0a can be
of type `RAID' with a raidframe mirror at the start and the kernel
will load OK of wd0a, and with raidctl -A root partitions, it will change
root as well.
setting for the "Idle/Pipeline DRAM Leadoff Timing (IPLDT)" parameter
(bits 9:8) is 01. Unfortunately, some BIOSs do not set these bits properly.
Based on a hint from OpenBSD.
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
apm was enabled in the wrong file, it's not needed in INSTALL_LAPTOP,
but should be there in GENERIC_LAPTOP.
wss0 at isa irq 10 may cause conflicts on some laptops; remove it.
Despite its name, PCIBIOS_INTR_GUESS is safe option, so enable it.
ports aren't supported for installation), MFS, slip and ppp. There
was no room for pppd and slattach on the "tiny" floppies anyway, so
there was nothing to use them.
Add pcic at isa, pcmcia, wdc at pcmcia, and 'wireful' cards @ pcmcia
(ne, ep, mbe, sm). Installing is now possible on a 4M laptop over
ethernet (tested with ep at pcmcia, and 640+3200 available memory).
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate
as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro
for hpcmips, use new bootverbose instead of it's own hpcmips_verbose
Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
that the page being zero'd was not completed and that page zeroing
should be aborted. This may be used by machine-dependent code doing
slow page access to reduce the latency of running a process that has
become runnable while in the middle of doing a slow page zero.
- Don't fall into infinite loop even if the # of iteration necessary isn't 1.
- Don't interpret lower 8bit of AL, which is # of iteration, as a descriptor.
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
and large page support. This version is a bit more intelligent about
how it deals with kernel text pages.
Now that this is fixed, don't map the kernel text read-write if
DDB is configured.
