jdolecek
4c5a46429b
use tty0 instead of com0
2003-10-20 16:42:13 +00:00
jdolecek
7a46124ea4
determine the platform number of disk partitions by looking
...
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf
change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly
2003-10-19 19:07:26 +00:00
jdolecek
54bd322b10
no need to duplicate creation of wskbd/wsmouse - target 'wscons'
...
creates these
2003-10-19 17:26:24 +00:00
jdolecek
20282f8b2e
change minor of /dev/zero for ARM ports to 12, so that it is same as on other
...
ports; follows the kernel change
2003-10-17 17:56:28 +00:00
jdolecek
7126da0813
MD part of unified MAKEDEV
...
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl
2003-10-15 19:13:32 +00:00
jdolecek
2d42eb283b
reassing majors for crypto and pf to use the newly defined MI major range
2003-10-10 22:47:10 +00:00
dsl
fca3294820
Add a /dev/constty == /dev/console but with minor 1.
...
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.
2003-10-03 14:35:36 +00:00
dsl
fc3574d3bf
Correctly fix pty majors
2003-09-05 17:11:30 +00:00
dsl
818622e67a
Change the way pseudo tty devices are generated in order to avoid
...
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)
2003-08-30 11:00:20 +00:00
itojun
4440262659
create /dev/crypto
2003-08-22 05:06:22 +00:00
itojun
3f14c71f75
reserve cdev major # for PF. ok'ed by technical-exec
2003-07-27 14:17:57 +00:00
ragge
ce0bf5c28d
Add ksyms to "std" devices.
2003-04-27 13:15:28 +00:00
fvdl
750b5b8327
Add an 'init' target, that creates the device nodes in the case where
...
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.
2003-04-17 18:03:10 +00:00
perry
2f1f870fa8
make ipl consistently "IP Filter"
2003-03-31 03:58:55 +00:00
wiz
0be80bf193
Sync vnd descriptions to one wording.
2003-03-30 18:11:34 +00:00
bjh21
892091f675
Use ${HOST_INSTALL_FILE} to put the bootloader in the release tree,
...
rather than cp. This seems to be what everyone else does, and saves
problems if the release tree is already part-populated.
2003-03-01 15:36:22 +00:00
lukem
a250e57c96
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
...
"${RELEASEDIR}/...".
${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.
2003-01-03 15:34:30 +00:00
jdolecek
67705b22ff
use single minimal default disktab file for most archs, replacing
...
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries
the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them
2002-12-19 20:03:46 +00:00
lukem
fe5f6ce974
- add snap_post, which makes "clean depend all release" in ../distrib/
...
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate
2002-12-02 13:18:03 +00:00
lukem
bc22c3f4d9
whitespace consistency cleanup
2002-10-21 04:14:47 +00:00
elric
f31269d0d9
Include cgd on the list of things to be mknod(8)ed on all arches.
2002-10-04 18:53:22 +00:00
lukem
fa4442cae4
- in local), only run $0.local if it is an existing file
...
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)
2002-08-09 02:39:15 +00:00
wiz
b097765198
Update comment on how to regenerate MAKEDEV(8) after changing the
...
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.
2002-06-18 13:40:14 +00:00
christos
4bef4356c3
Add device creation support for systrace.
2002-06-17 16:21:03 +00:00
jdolecek
074863cac2
Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
...
or very similar configs removed.
2002-05-04 19:43:57 +00:00
lukem
2d1f93d643
- consistency cleanup
...
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform
2002-05-02 15:09:40 +00:00
bjh21
bb6c644707
"make release" in distrib/acorn26 too.
2002-04-19 00:05:25 +00:00
tron
ddec80a3a4
Back out last change because we now have a special disktab for the
...
FFS regression test.
2002-04-09 14:11:22 +00:00
tron
78e9ad7e9c
Add missing "floppy288" entry required for FFS regression test.
2002-04-09 12:40:33 +00:00
bjh21
d4d04c5a9b
Add a "ramdisk" set, and remove "minimal", since it served much the
...
same purpose.
2002-04-02 22:21:28 +00:00
bjh21
3d0d823bd8
Fix up makesums line to use ${MAKESUMS} and the correct directory.
2002-04-01 19:12:16 +00:00
bjh21
1050fe6ae0
Put boot26 in the installation/misc directory, since that's where it's
...
documented as being.
2002-03-31 16:02:30 +00:00
bjh21
2718876fd5
Rename etc.arm26 -> etc.acorn26
2002-03-24 21:20:38 +00:00