63d3904bce
Use irq directly not as a mask
1995-02-28 21:47:42 +00:00
48b5b94c4f
fix some typos. from frank@fwi.uva.nl (Frank van der Linden)
1995-02-27 09:10:24 +00:00
2c0f263ee7
use wdc_softc in wdccd, rather than wd_softc; from chuck cranor. (pr 828)
1995-02-27 01:08:01 +00:00
559df5705c
PSS driver; needs testing with config.new
1995-02-21 04:15:03 +00:00
39b8de8e12
Driver for Windows sound system; not extensively tested
1995-02-21 02:28:42 +00:00
32eec53a2d
SoundBlaster driver for SB, SB16 and SBPRO
1995-02-21 02:28:06 +00:00
a70ae7273c
PAS driver; uses SB emulation for now
1995-02-21 02:27:18 +00:00
977594d1a9
Driver for ad1848 codec
1995-02-21 02:26:39 +00:00
8b834a58ca
Display more information when we get bogus data off the card.
1995-02-19 18:05:45 +00:00
0f894be19c
Rearrange epintr() to insure proper edge-trigger of the interrupt latch.
1995-02-19 06:13:53 +00:00
a36de19f90
Make some guesses about how to properly configure the interrupt masks. Back
...
out part of the previous change until I get some documentation on these boards.
1995-02-10 01:37:57 +00:00
e9c2b98c11
Comment a potential bit of lossage.
1995-02-02 21:08:42 +00:00
8abb91e18d
Various:
...
* Make synchronous negotiation work.
* Use the bitbucket when the target requests too much data.
* Loop in aicintr() until we get to a state where we have to wait.
1995-02-01 21:49:37 +00:00
ab5662014f
Correct some more of the synchronous stuff, and omit it completely if
...
AIC_USE_SYNCHRONOUS is 0.
1995-02-01 16:56:42 +00:00
4653b28a42
Various:
...
* Always enable disconnection.
* Add some more per-controller variables: initiator ID, clock frequency,
min and max sync period.
* Correct sync period calculations.
* Remove sc_progress.
* Move most of the reselection handling into a separate function.
* Remove some outdated comments.
* Remove message bytes from FIFO even when dropping them on the floor.
* Some cosmetic cleanup.
1995-02-01 16:11:43 +00:00
16e77e7281
Fix path to if_lereg.h.
1995-02-01 09:54:36 +00:00
3a7bbb1acd
lip service to making ISA support machine-independent. This is the first
...
round: moving the drivers into a machine-independent directory.
Some drivers (e.g. fd.c) not moved because they use other pc features (e.g.
CMOS settings), and none of the non-driver files moved, because they're
still pretty much PC specific. eventually (when other ports with ISA
busses really start using this code), more 'high-level' ISA support will
live here.
1995-01-29 07:36:54 +00:00
f11e7e33fe
use chip headers in /dev/ic
1995-01-29 02:58:20 +00:00
c5d5ca8150
Don't check the control port at all; too unreliable.
1995-01-26 07:35:49 +00:00
c0e2bd26f1
Initialize the new xmit state correctly. From Rafal Boni.
1995-01-26 04:13:23 +00:00
57f2c598c7
Various changes from Rafal Boni to improve performance and reliability. Also,
...
clean up the formatting a little more.
1995-01-23 04:50:08 +00:00
01ce8db055
Fix the problem with identifying cards on warm boot. Partly from Greg Hudson.
1995-01-22 07:37:28 +00:00
3dddacd1ce
Rearrange tests so `offline' has higher priority than `out of paper'.
1995-01-22 00:12:39 +00:00
fcdbd2bd7b
Remove outdated comment.
1995-01-16 10:36:26 +00:00
87d587e640
Simplify some sanity checks.
1995-01-13 14:46:44 +00:00
1e5cd9212d
(Almost) allow sector sizes other than 512 bytes. Reduce some expensive operations.
1995-01-13 12:30:59 +00:00
7650bd97fc
Always boundary check I/O.
1995-01-13 10:46:32 +00:00
0033c975c6
Fix another bug in the DMA code.
1995-01-13 10:22:58 +00:00
4abdb375bc
Minor rearrangement.
1995-01-13 09:40:21 +00:00
c2bc310a37
Change the way sc_skip is used. Fix a bug in the (incomplete) DMA code. Add a
...
new sc_blkno (which will be useful later).
1995-01-13 08:58:16 +00:00
0a22930d97
Explicitly test the RXRDY status bit on incoming characters.
1995-01-11 09:56:40 +00:00
06b0414491
Actually, do the ID reset in elink_reset().
1995-01-07 21:37:54 +00:00
37e16c5747
Don't print line numbers in most of the diagnostics.
1995-01-07 06:49:35 +00:00
d4f91d51a9
Fix a race condition between normal I/O and wd_get_parms().
1995-01-07 03:07:22 +00:00
7f61bec5cd
Cosmetic changes, to look more like the new esp.c will.
1995-01-07 01:51:07 +00:00
ba288b4ae1
Do the reset in the individual drivers, not in elink_idseq().
1995-01-06 21:41:26 +00:00
6125e1b551
Fix oversight in previous.
1995-01-04 00:47:53 +00:00
9e499d41b3
\
...
These files have been 99% rewritten from the original ast driver. Add an
appropriate copyright notice.
1995-01-03 22:38:54 +00:00
0349c5b9e0
Add a multiplexer for BOCA serial boards.
1995-01-03 22:26:36 +00:00
09834a5bd3
This is correct according to the docs on both cards.
...
Doesn't seem to make any difference to the known problems though.
1995-01-03 05:04:04 +00:00
b6c8a9a4e9
Update intr_establish() prototype.
1995-01-03 03:14:35 +00:00
b5cf1b5ddd
Add interrupt sharing types.
1995-01-03 01:30:14 +00:00
326830c1ba
Use direct config for subdevices.
1995-01-02 22:27:46 +00:00
e148dc7a64
Move setting of sc_maddr so soft config works.
1995-01-02 22:01:05 +00:00
a774fa6fe5
Use soft configuration when possible.
1995-01-02 21:57:04 +00:00
3a967fcbb6
More cleanup.
1995-01-02 21:27:27 +00:00
72dec3b548
Various cleanup.
1995-01-02 20:54:01 +00:00
3a74796b3e
Need isareg.h.
1995-01-02 20:39:35 +00:00
894bb9145f
Use soft configuration where possible.
1995-01-02 20:32:55 +00:00
2d5b04744a
Don't assume ia_maddr is in the hole.
1995-01-02 20:06:29 +00:00
brezak