mediaopt adhoc 802.11 adhoc (IBSS) mode. IBSS creation is enabled
for cards which can create IBSS.
mediaopt adhoc,flag0 old lucent adhoc demo mode.
Note that [adhoc] media options for wi driver was used for adhoc demo mode,
which is NOW CHANGED.
EXCLUDE_UNENCRYPTED bit in the WI_RID_P2_ENCRYPTION value if we are
in shared key mode. Symbol cards, just to be different, supposedly
always want the EXCLUDE_UNENCRYPTED bit set (confirmed with the
Linux orinoco and spectrum24 drivers).
* Flesh out the Host-AP WEP transmit side. Note this does not yet
work properly; the frame as seen by the receiver FCS's incorrectly.
Both changes from OpenBSD. Not confirmed whether or not Host-AP WEP
works with OpenBSD (mail sent to millert).
WEP for APs is not yet implemented, but without WEP, this works well
enough for my laptop to associate with an AP running this code.
Adapted from OpenBSD.
in this info based on firmware type and version. Replace "wi_has_wep"
with a flag.
* For cards which support IBSS, add "ibss" has a media option.
* For cards which support CREATE_IBSS, add "ibss-master" as a media
option.
* Use the "ibss" and "ibss-master" media options to determine if
we should go into IBSS mode and/or create the IBSS.
* Internally convert between the generic WI_PORTTYPE_IBSS and the
value the firmware wants to use for IBSS.
* When setting the IBSS name, if a desired-SSID is set, and we're
an ibss-master, write the desired-SSID into the own-SSID slot.
This ensures that "ifconfig wi0 nwid FOO" will do the expected
thing.
* Only set the roaming mode if the card supports roaming.
From OpenBSD.
WI_RID_SCAN_APS in previous commit works for Intel Pro/Wirelss 2011
with firmware 2.51.1.
It seems that the firmware automatically updated after the card runs on
Windows 2000 with 2011_2011B_CD_3.0 in Intel web site.
- The version string doesn't need to start with 'V'.
- Symbol firmware also support CREATE_IBSS.
- But it doesn't support ROAMING_MODE nor MICROWAVE_OVEN.
Allow SIOCSWAVELAN with WI_RID_IFACE_STATS to request
an immediate statistics update.
We might in the future want to have SIOCGWAVELAN with
WI_RID_IFACE_STATS return an error if a statistics gathering is in
progress. Then the caller could request fresh statistics and gather
them when they are done. Instead, we currently just return whatever
statistics are available, which may be up to 60 seconds old.
this partially addresses pr14385.
there is still a byte swapping bug retrieving the
stats structure. Since both the type and the length
are incorrectly swapped, we would timeout while reading
an extra long section (caused by the byteswapped length)
of garbage data.
turning on WI_DEBUG now just reports the unknown info type
which can be seen to be obviously incorrectly swapped
on macppc
pairs. Without this, the interrupt handler will steal the "command completed"
status and wi_cmd will busy loop until it times out.
Add some error output to make failure modes like this more prominent.
This should fix PR 14559.
;
Implement wi_scan into wi.c.
forces if_wi to initiate one round of access point scan.
This code was written by jrb@cs.pdx.edu, modified and bug-fixed by ichiro@netbsd.org
onoe