e88e747668
Replace pckbc with macekbc.
...
Enable crmfb
Enable wsfont, wsmux
2007-04-12 13:14:53 +00:00
eaf962445e
Remove pckbc_mace, it has never worked and has been replaced by macekbc
2007-04-12 13:12:00 +00:00
5d51f0c963
Enable O2 onboard framebuffer driver.
2007-04-12 13:10:59 +00:00
d4c79dc9a5
Add crmfb, a framebuffer console driver for the onboard O2 video (SGI-CRM)
2007-04-12 13:10:20 +00:00
65ec9d356d
Don't clobber callee save registers r12 & r13 in swapcontext. They
...
were saved in the stack, but the subsequent swapcontext would return
to the earlier stack frame and never restore them. Fixes puffs
with default compiler flags on amd64.
Thanks to Mihai Chelaru for providing access to an amd64 machine
for debugging this problem.
2007-04-12 12:33:26 +00:00
ee87345f90
Remove unused label.
2007-04-12 10:07:36 +00:00
2d50a59010
Use IEC 60027-2 prefixes for 2^n based prefixes.
2007-04-12 06:50:39 +00:00
7347fd3ceb
build wsfb on sparc64
2007-04-12 06:41:36 +00:00
3d05e3a2bc
Update example to use KiB per recent change to ../ftp/progressbar.c
2007-04-12 06:31:20 +00:00
b7dea03346
Make the members of the descriptors volatile, because the NIC and
...
the host share them.
Before breaking out of the loop over descriptors in gem_rint(),
DMA-resynchronize the first Rx descriptor we found that does not
belong to the host. We must avoid a cached descriptor "covering"
a descriptor in RAM, because the cached descriptor may say that
the descriptor still belongs to the NIC, when that is not true,
and the driver will hang.
XXX I believe this driver only works by luck on hosts that both
XXX have a cacheline size greater than the size of a descriptor
XXX (16 bytes) and lack DMA/cache coherency. I need to add some
XXX trickery to make sure that we don't scribble over the NIC's
XXX changes to a descriptor when we flush a cached descriptor to
XXX RAM with bus_dmamap_sync(9).
2007-04-12 06:14:40 +00:00
7898b5e0a8
Use the IEC 60027-2 2^n based "KiB", "MiB", "GiB", (etc)
...
suffixes for byte displays since we're using 2^n scaling,
instead of the SI 10^n based "KB", "MB", "GB" (etc).
2007-04-12 06:13:02 +00:00
af26ee6d9c
Use PRIx64 and PRIx32 format strings. Remark about lack of DMA
...
synchronization at some debug code that reads descriptors.
2007-04-12 05:56:01 +00:00
cb9ef1cfbd
apply revision 1.31 yet again:
...
"make sure that we don't try to allocate negative memory when blks == 0."
or on amd64, "make sure that we don't allocate 32 GB when blks == 0."
2007-04-12 05:19:18 +00:00
5672861f48
Document the thorpej-atomic branch.
2007-04-12 05:07:58 +00:00
f49c4e1415
thorpej-devvp is dead.
2007-04-12 05:03:33 +00:00
98b66d0b78
Fix using /usr/bin/ftp as a slave process on the end of a pipe by calling
...
fflush(stdout) before each command.
Taken from FreeBSD's pre-lukemftp version of ftp.
2007-04-12 04:25:00 +00:00
00e5aa03ea
whitespace pedantry
2007-04-12 04:18:22 +00:00
1adc8479ba
Some rogue implementations use random physical partion numbers just to
...
break other implementations so lookup the physical number instead of
indexing it. Choosing random numbers here is legal according to the specs,
but not a logical choice and most likely done as a wierd kind of copy
protection.
Rogue implementation found to use this
*Microsoft CDIMAGE UDF
2007-04-12 01:56:36 +00:00
b1e08b00c3
Various fixes from Nicholas Marriott sent to openbsd-tech and in private email:
...
* Prevent segfault if a .netrc token is too long.
* Prevent segfault when using a macro from an empty macdef.
* Check more return values.
2007-04-12 01:28:13 +00:00
20341ba8ef
Add sysctl tree to modify the fast_ipsec options related to ipv6. Similar
...
to the sysctl kame interface.
2007-04-11 22:21:41 +00:00
68c3173bb4
When we construct an answer for SADB_X_SPDGET, don't use an hardcoded 0 for seq but
...
the seq used by the request. It will improve consistency with the answer of SADB_GET
request and helps some applications which relies both on seq and pid.
Reported by Karl Knutsson by pr/36119.
2007-04-11 21:33:40 +00:00
1cfe630356
adapt to new readdir signature. no functional change
2007-04-11 21:21:50 +00:00
2a2cd74d79
In spddelete2, if we can't find the sp by this id, return after sending an error message,
...
don't process the following code with the NULL sp.
Spotted by Matthew Grooms on freebsd-net ML
2007-04-11 21:19:35 +00:00
7ed53cb9ec
adapt to new readdir signature. no functional change
2007-04-11 21:10:49 +00:00
5af002af7d
support nfs exporting sysctlfs. it is now possible to manage the
...
sysctl tree for a host over nfs (for however megaexciting that is)
2007-04-11 21:08:52 +00:00
3e65ff17b5
support nfs exporting dtfs
2007-04-11 21:07:54 +00:00
664eefa775
update prototype of vfs_vptofh
2007-04-11 21:06:32 +00:00
6b7023f08f
* support nodetofh and fhtonode callbacks
...
* use new signature of node_readdir
2007-04-11 21:04:51 +00:00
f50d2a26f2
* support VFS_FHTOVP and VFS_VPTOFH
...
* support cookies in for VOP_READDIR
nfs exporting puffs file systems works now
2007-04-11 21:03:05 +00:00
a7ea3f4e89
add const to the data for hid_use_report_desc() since it does
...
not modify the memory.
2007-04-11 20:56:20 +00:00
dcb3400385
Sync ISO target directory and name with distrib/common/Makefile.bootcd:
...
target directory is ${RELEASEDIR}/iso/, named ${MACHINE}cd.iso by
default.
2007-04-11 20:46:09 +00:00
6b1f9646c6
release prop objects after they have been retained by dictionary
2007-04-11 20:01:01 +00:00
51bb5141d1
constify char *service
2007-04-11 19:59:02 +00:00
4256fea0fa
add the define of MCA_MAX_SLOTS here
2007-04-11 18:33:52 +00:00
d3f6afef69
Remove the define of MCA_MAX_SLOTS from mcareg.h, and include
...
mca_machdep.h, because the maximum number of slots is inherently MD.
2007-04-11 18:32:19 +00:00
29fbd02006
Regen
2007-04-11 18:11:34 +00:00
6256d37223
Add a bunch of adapters from my rs6000 to this file
2007-04-11 18:11:15 +00:00
e1dc09af02
clean up tadpole_request() API
...
from mrg
2007-04-11 16:30:26 +00:00
c2d75511d9
Add CDSOURCE variable to include the source in the CD. From Anon Ymous
...
Misc cleanups
2007-04-11 16:21:40 +00:00
bc7c2c3b94
Regen (statfs support).
2007-04-11 11:51:19 +00:00
f771d34a84
- Add compat amd64 linux32 statfs support, adapted from PR/35956.
...
- Move bsd_to_linux_statfs() function to its own file to be shared
between both linux compats.
ok by manu.
2007-04-11 11:45:55 +00:00
c634885e0f
make overspammy debug printf less overspammy
2007-04-11 09:43:19 +00:00
a0f7691122
Add btuartd.conf to bluetooth.
2007-04-11 07:16:28 +00:00
ea73350dac
Suppress printing non-COMPLETE reply strings from EPSV and EPRT, as we're
...
going to fall back to PASV / PORT (respectively) if the former fail,
and this avoids printing a failure reply followed by a success reply.
Should fix a problem with the emacs ftp wrapper.
2007-04-11 05:03:25 +00:00
7c906f3f93
return 100 in match() so we beat genfb
2007-04-11 05:01:39 +00:00
cea884f98c
mention genfb
2007-04-11 04:51:26 +00:00
df0a99cbb2
fix a typo
2007-04-11 04:48:31 +00:00
70eab97a3a
add WSDISPLAYIO_LINEBYTES support so we can run XFree86 with wsfb
2007-04-11 04:47:09 +00:00
32376f5c18
pull in rasops1 and rasops32
2007-04-11 04:46:33 +00:00
9b5f7f0162
add an sbus frontend fro genfb
...
in theory this should work on any SBus framebuffer
tested on various cgsix and p9100, needs to be tested on more hardware
2007-04-11 04:45:45 +00:00
jmcneill