3f9baf7ddc
Re-move .if!defined(__ARCH_OK) to fix use of NO_IGNORE; document some .endif's
1998-01-25 14:46:10 +00:00
af94a7e9dc
MAINTAINER = packages@NetBSD.ORG
1998-01-25 14:39:49 +00:00
2663a57471
remove files added by lite-2 sync.
1998-01-25 00:37:38 +00:00
1dba62f76d
import lite-2
1998-01-25 00:35:02 +00:00
8e4b1a4ffe
From OpenBSD's bsd.port.mk rlog (Mmm, AnonCVS :-):
...
revision 1.21
date: 1997/12/20 01:26:57; author: joey; state: Exp; lines: +2 -2
openbsd maintainer changed from imp to me
1998-01-24 23:06:33 +00:00
48b59e11c5
Back out the ipnat static change.
1998-01-24 19:15:04 +00:00
16cc8254d4
Move ipnat from /etc/netstart to /etc/rc after /usr is mounted.
1998-01-24 19:12:54 +00:00
63162f08ec
Add a svr4_setregs() (that just calls setregs() right now).
1998-01-24 18:26:09 +00:00
15ae963bea
When dumping, print out the device number as major,minor.
1998-01-24 16:46:23 +00:00
8a5023e38c
After writing to the IOMMU flush registers, read something back from
...
IOMMU control space to a flush register to drain internal write buffers (?).
This avoids utter lossage on some machines (SS4s & SS5s) where our caller
would see some of its local (`%lx') registers trashed. This is probably
caused by a silicon bug allowing interference on internal data paths..
1998-01-24 16:22:47 +00:00
1f21545d93
Correct an oversight in the startup changes that caused the wrong exception
...
to be reported in one case.
1998-01-24 15:50:42 +00:00
09559070f7
* Do not remove ATN from the scsi bus if we have no messages queued but
...
the target still is in MSG OUT phase. We still send a message (a NO_OP)
in this case and the chip will remove ATN at the appropriate time.
Using the RSTATN command here induces a "illegal command" in some
chip revisions.
This situation only occurs if the target rejects a previous (multi-byte)
message early (by switching to MESSAGE IN and sending a MESSAGE REJECT)
before the chip has completed the entire MSG OUT transfer. ATN will
remain asserted, and the target returns to MESSAGE OUT phase.
* Account for the events above when reporting "DMA not completed"
diagnostic messages.
* Stream-line the selection code a bit, and make the DMA setup code
more like the MSG OUT & DATA XFER setup.
1998-01-24 15:33:35 +00:00
02b075bafe
Make `info float' work. Mostly from Noriyuki Soda.
1998-01-24 15:32:41 +00:00
8661bee5de
Minor change.
1998-01-24 14:22:44 +00:00
eda1eecede
Remove __BROKEN_INDIRECT_CONFIG and change all drivers to use
...
config_search instead.
1998-01-24 14:16:11 +00:00
d664bf39b8
Add some comments about what the control words do.
1998-01-24 14:00:36 +00:00
a963fe5864
Store the initial NPX control word appropriate for the emulation in the saved
...
FPU state, and use it when initializing the FPU on demand.
1998-01-24 13:19:46 +00:00
a9a7cc88d1
Need foo_exec.h.
1998-01-24 12:45:16 +00:00
ae1a2006c5
-take over debugging printf format fixes from sys/lib/libsa/nfs.c rev.1.23
...
-make error reporting for mount working as in sys/lib/libsa/nfs.c
1998-01-24 12:43:09 +00:00
8bd9717302
Add local versions of setregs(), so I can tweak some registers later.
1998-01-24 12:42:22 +00:00
9dd67a9098
Prototype new functions.
1998-01-24 12:39:37 +00:00
112a8edc95
Use svr4_setregs().
1998-01-24 12:34:16 +00:00
69b60a733c
Use freebsd_setregs().
1998-01-24 12:33:15 +00:00
72623d8443
Use linux_setregs().
1998-01-24 12:32:15 +00:00
5685520ac1
Always set sc->sc_timeout (it was missed in one case). This fixes a problem where SYN cache entries are sometimes timed out almost immediately.
1998-01-24 12:27:31 +00:00
4b8a102fbb
Fix process_{read,write}_fpregs().
1998-01-24 12:11:15 +00:00
5ab55e91b7
Fix an old editing error from merging a bug fix into Lite,
...
that might cause us to erroneously drop a FIN.
Also, minor changes so the code looks more like Stevens vol 2 figure 28.30.
1998-01-24 05:04:27 +00:00
74576ae63b
fix richard o'keefe's email address (will have to change for his new job, but the one i've used is at least valid...)
1998-01-23 23:05:34 +00:00
49d2bfe020
Add a couple of options I forgot in last commit.
1998-01-23 22:47:20 +00:00
884c32ed05
Add new RELOCATED_FILES_14 because ipnat moved from /usr/sbin to /sbin.
1998-01-23 22:36:39 +00:00
ccd79b8dca
Update for the static ipnat programm.
1998-01-23 22:34:12 +00:00
a0f14625a7
Build ipnat statically and install it into /sbin. Fix pr4879.
1998-01-23 22:32:08 +00:00
d15d246d32
Add wdc* at isapnp?.
1998-01-23 20:42:34 +00:00
929286557a
Add a PnP IDE frontend.
1998-01-23 20:40:58 +00:00
60c3299e3e
Fix some debugging printf formats.
1998-01-23 19:27:44 +00:00
cacd48c0d6
Print the correct error number if nfs_mount() fails. From Chris Demetriou.
1998-01-23 19:13:28 +00:00
b92943e80a
update to match (now-fixed) libc rules for strchr and strrchr.
...
Brokenness pointed out by Matthias Drochner.
1998-01-23 19:01:17 +00:00
5815a7b9b9
Update various aspects of the special target builds which should
...
have been done (by others) a long time ago:
* fix PIC compilation to use new PIC flags,
* make them 'make -j N' safe.
1998-01-23 18:58:05 +00:00
6c7a7eefde
Echo "" instead of nothing in CKSUMFILES computation..
...
Fixes PR 4877 by Manuel Bouyer <bouyer@antioche.lip6.fr>
1998-01-23 16:48:23 +00:00
67569086c4
a memory leak can occur when xdr_replymesg() fails, so XDR_FREE in
...
this case. originally fixed in freebsd in clnt_udp.c, and similar
change to clnt_raw.c made by openbsd.
1998-01-23 14:44:22 +00:00
f5d4256de8
use .Tn YP instead of YP
1998-01-23 13:49:10 +00:00
8bfd252c83
use .Tn YP instead of .Nm YP
1998-01-23 13:45:21 +00:00
93480d2ed5
use .Tn YP instead of YP
1998-01-23 13:38:24 +00:00
a985fee84c
* -insecure is for binding to insecure *servers*, not insecure *clients*.
...
noted by Bill Studenmund <skippy@macro.stanford.edu>.
* use .Tn YP instead of YP
1998-01-23 13:36:57 +00:00
7e5c045bb6
remove prototypes for deprecated index() and rindex()
1998-01-23 12:56:39 +00:00
bf08ec7da8
In the shell script to find an executable upon which this package
...
depends, break out of the loop when you find one. Also print the name
of the executable found.
1998-01-23 09:47:57 +00:00
51ffd85641
Uncomment wdc.
1998-01-23 01:18:52 +00:00
c1d56d473f
Add wdc* at pcmcia.
1998-01-23 01:16:03 +00:00
e89c38b4c2
Slight cleanup.
1998-01-23 01:14:13 +00:00
753e4909bb
Assume a newline has already been printed in wdcattach().
1998-01-23 01:06:45 +00:00
hubertf