Use x86 native boot for current.
Swap i386 and amd64 in multiarch CD sets (cd1 would overflow by 30M otherwise)
and leave vax out (cd3 would overflow by more than 100M - time for a
multi-cd4 ?)
A bootable sgimips has a volume header prepended, and so is useless for
anything but sgimips. The issue was not found before because the
logic to make an ISO bootable on sgimips was broken, and has been fixed by
tsutsui@ on 2007/03/04.
- introduce SGIMIPS_SGIVOL variable which specifies sgivol(8) path
because nbsgivol tool is available only in TOOLDIR for sgimips and
possibly exists in a different directory from default TOOLDIR path
- use fixed (4096) value for SGIVOLHDR.size because default value
taken from <sys/bootblock.h> is 3135 (not multiples of 4) so it
doesn't match 2048bytes/sector CD images
- also pass SGIVOLHDR.size to sgivol(8) on creating volume
- rename raw iso9660 image before creating SGIVOLHDR to avoid
incomplete (non-bootable) image left on failure of sgivol(8)
Problem (i.e. sgimipscd-3.0.2.iso is not bootable) was reported
by Thierry Lacoste on port-sgimips, and fixed images are also
tested by him on IP22 (and by me on IP32).
to make debugging Makefile easier.
For example:
# make RELEASE=3.1 obj
# make RELEASE=3.1 TARGET_CD_IMAGE=sgimipscd fetch
# make RELEASE=3.1 TARGET_CD_IMAGE=sgimipscd
or:
# make RELEASE=current obj
# make RELEASE=current RSYNC_SITE=rsync://rsync.NetBSD.org/NetBSD-daily/HEAD/200702280002Z TARGET_CD_IMAGE=macppccd fetch
# make RELEASE=current TARGET_CD_IMAGE=macppccd
etc.
necessary target system headers (<fs/unicode.h> and <fs/cd9660/iso.h>)
because system headers for the host (like <sys/stat.h>) are also pulled
from there and it causes build errors if target src tree is different
from installed one on the host.
Instead, copy the necessary system headers for host's programs into
${.OBJDIR} first.
Problem reported from Geert Hendrickx, and there is no particular comment
on tech-toolchain.
on (some) OpenFirmware 2.x machines.
Current macppccd.iso image doesn't boot on Openfirmware 2.x
(and probably 1.0.5) machines because it uses pre-compiled binary
which is based on old (and customized) bootxx.
It causes version mismatch against newer ofwboot whose load address
has been changed from 0x600000 to 0xe00000, as mentioned in the
following post:
http://mail-index.netbsd.org/port-macppc/2004/12/14/0020.html
There was also an raw binary which was passed to mkisofs as -boot-hfs-file.
To fix these issue, prepare a simple mkhfsboot program which creates
a boothfs file with the Apple partition map info for mkisofs,
and modify macppc_installboot to search the secondary ofwboot from isofs
and to put and modify the primary bootxx accordingly.
See PR toolchain/30245 for more details.
There are still some machines which don't boot from an iso image created
by this method (G3 machines with OF 2.0f1 etc.), but it's still better
than to keep ugly and obsolete hacks.
Ok'ed by macallan, and there is no other particular comment about this PR.
to label the .iso image files.
While I'm here, modernize the ports list to what's being released with
3.0, and put them one-per-line to make it easier to comment out a single
port if necessary.
The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.
* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.
With help from abs.
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC
For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo
Document all of these in bsd.README.
This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.
instead, keep uuencoded versions in the repository.
(arguably /usr/sbin/installboot -m macppc should support -t cd9660,
at which point we'd nuke this macppc_installboot hack)
ghen