4905974fd1
Very initial support for booting PPC kernels on P5 boards.
1999-11-28 22:10:47 +00:00
14ed33e42e
Fix typo (&& -> &).
1999-11-28 20:30:57 +00:00
0c3ecf8e5e
Improve Ultra/66 support now that I've got some docs from Promise.
1999-11-28 20:05:18 +00:00
7bd006b847
Improve a few debug messages.
1999-11-28 20:04:22 +00:00
15ca2512dc
Add a missing '\n'.
1999-11-28 20:03:17 +00:00
94552ad5d6
- Use alpha_atomic_{add,sub}_q() to update the pmap statistics. We now no
...
longer need to lock the kernel pmap in pmap_kenter_pa() and pmap_kremove().
- Since locking the kernel pmap in interrupt context is no longer required,
don't go to splimp() when locking the kernel pmap.
- Implement a new pmap_remove() function, not yet enabled by default. It
is structured like pmap_protect, and should be *much* faster. This was
actually written quite some time ago, but never committed because it
didn't work properly. Given the recent bugfix to pmap_protect(), "duh,
of course it didn't work properly before...". It seems to work fine now
(have done several builds and run the UVM regression tests using the new
code), but it is currently run-time optional so that some performance
measurements can be easily run against the old and new code.
1999-11-28 19:53:11 +00:00
1710fad449
Implement atomic addition and subtraction on quadwords.
1999-11-28 19:47:13 +00:00
9fcf201409
Make this compile again on sparc.
1999-11-28 18:06:46 +00:00
29522f7b7d
Add man4.mvme68k subdirectory.
1999-11-28 17:41:11 +00:00
e5981892de
Add the long-awaited section 4 man pages for mvme68k :-)
1999-11-28 17:39:42 +00:00
9f3c20bc0f
Use the libc md5 function.
1999-11-28 17:39:06 +00:00
26d8542f39
Add mvme68k section 4 MD pages, and entries for the MD boot.8.
1999-11-28 17:36:34 +00:00
4eab2b28e4
Add directories for mvme68k MD man4 pages.
1999-11-28 17:32:16 +00:00
3d10a6abc6
Add manual page describing mvme68k boot.
1999-11-28 17:30:33 +00:00
5e5665ea10
Remove commented lines which are not used here.
1999-11-28 17:02:27 +00:00
ff8362d781
Install named.conf again into /usr/share/examples/named.
...
Somehow it vanished when I updated the bind version.
1999-11-28 16:58:16 +00:00
9b1cdae9fe
Add the missing files:
...
- /usr/libdata/lint/llib-l{crypto,des,ssl}.ln
- /usr/sbin/{eaytest,kmpstat,racoon}
- /usr/share/examples/openssl/{CA.pl,CA.sh,der_chop]
- Manpages for racoon.conf(5) and racoon(8).
- /usr/share/man/whatis.db
and sort the list.
1999-11-28 16:23:32 +00:00
1c98f42fe6
Add the manpage for i386/pnpbios(4) and the formarted manpage for
...
pmax/installboot(8).
1999-11-28 16:14:34 +00:00
31ef3245e1
Add the manpages for dnskeygen(1), cardbus(4), mbe(4), mhzc(4), newbtconf(8)
...
and nsupdate(8).
1999-11-28 16:13:54 +00:00
48312b875b
Add ./usr/libexec/dnskeygen and
...
./usr/share/zoneinfo/Europe/{Tiraspol,Uzhgorod,Zaporozhye}
1999-11-28 16:13:27 +00:00
d92ae4181c
restrict result from getaddrinfo() by specifying ai_socktype.
...
(otherwise getaddrinfo() will glob through all the possible ai_socktype
and ai_protocol)
1999-11-28 14:51:04 +00:00
54f42f17fc
Don't bother spinning in the console 'putc' routine for the transmitter
...
to become idle; it actually doesn't matter as the chip takes care of
this for us. It would also spin endlessly in certain circumstances
during shutdown.
While I'm here, (finally) add code to allow sending BREAK characters.
1999-11-28 12:23:18 +00:00
f972baf686
Add definition for VR's special instructions.
1999-11-28 12:11:45 +00:00
3029c58799
Use a bitwise-and to test CC_IPURGE, not a logical-and. This could have led
...
to flushing the entire cache unnecessarily.
1999-11-28 11:10:47 +00:00
943c083676
PowerOff code. (not yet completely)
...
'halt -p' availavle.
not yet all power off...
cannot exit poweroff mode. (reset required..)
1999-11-28 10:59:05 +00:00
86a8f1d201
Sync cachectl1() implementation with other m68k ports.
1999-11-28 10:36:56 +00:00
99d3468790
Don't use the plural form of the word "target" if there is only one!
1999-11-28 10:10:51 +00:00
dc2663bf69
If there is only one ADB device, it will do us no good to avoid it
...
when guessing which device to poll next. Resolves PR 7407, but the
bug is a lot older than that.
1999-11-28 10:07:34 +00:00
465c7f924f
Don't use magic numbers! Use XINE_REG_IMSK and KMIN_REG_IMSK.
1999-11-28 08:29:00 +00:00
5c10c3a1c1
Remove the "disklabel -W" when installing the bootblocks now that the
...
extra bounds check in the rz driver has been removed.
1999-11-28 06:32:21 +00:00
d0090fb777
* implement xsl_init() and xsl_add(); error checking forms of sl_{init,add}()
...
* fix bug where the second press of <TAB> on an empty word (i.e, list
all options) may have resulted in an strncmp() against NULL. (detected
by _DIAGASSERT())
1999-11-28 06:32:04 +00:00
71cc75d706
Don't check for a write to write protected label if we are writing to
...
the raw partition.
1999-11-28 06:28:37 +00:00
fcab0ccebb
Tidy up the formatting of a comment.
1999-11-28 06:06:21 +00:00
338f7d21c4
change retval of _nsdbtaddsrc and _nsdbtput
1999-11-28 05:51:46 +00:00
2468bbbf42
don't use err(); instead pass an error condition back to a higher
...
layer to warn() about.
1999-11-28 05:46:15 +00:00
d805fbc3b6
Check bounds against RAW_PART instead of partition 0.
1999-11-28 04:55:39 +00:00
3047c747cf
Add a MKPICLIB variable. If set to "no", don't build an _pic.a library
...
and build shared objects from the .a library. A symlink is installed
in /usr/lib so that the name "libfoo_pic.a" still exists for third party
software that explicitly wants an _pic.a library.
1999-11-28 04:50:41 +00:00
683d885daf
more gracefully detect _NG_ERROR
1999-11-28 04:40:21 +00:00
d51504eeb3
check return val of sl_init() and sl_add()
1999-11-28 04:38:41 +00:00
a8d12b09cd
* check the result of sl_init() and sl_add()
...
* return an error state back up the call chain and take appropriate
action, rather than calling err() to terminate the process
1999-11-28 04:30:15 +00:00
62009df24f
Add new device vrdsu, with which we can hard reset the VR41xx CPU.
...
Why don't you try shutdown comand with option '-r ?
1999-11-28 04:29:37 +00:00
56a2dec5a5
* check the error return of sl_init() and sl_add()
...
* minor KNF
1999-11-28 04:00:04 +00:00
67fecdbace
remove unnecessary exit() after err()
1999-11-28 03:47:24 +00:00
6ff813a549
change sl_add() from returning a void to returning an int
1999-11-28 03:45:14 +00:00
46a687b139
* sl_init(); if malloc() fails return NULL instead of calling err(1,...)
...
* sl_add(); if realloc() fails return -1 instead of calling err(1,...).
otherwise, return 0.
NOTE: this change resulted in sl_add() changing from returning void to int.
this shouldn't be a problem because a) it returns 0 if ok (aka `void', b)
all invokers of sl_add() in the tree have been changed (mainly code i've
written).
1999-11-28 03:44:09 +00:00
bf997953d8
Use installboot(8) to install the bootblocks.
...
XXX: Need "disklabel -W" for now to enable writing to the label area.
1999-11-28 03:38:10 +00:00
6db05d52c4
Trim down a comment.
1999-11-28 03:37:01 +00:00
1fcc860815
Enable new pmax bootblocks.
1999-11-28 03:17:11 +00:00
e6c9a0137f
Reflect new pmax bootblock layout.
1999-11-28 03:13:22 +00:00
d6e1bba94e
installboot(8) man page based on alpha installboot(8) man page.
1999-11-28 03:07:04 +00:00
is