48fc6c37a0
Correct child_return() so child is charged for its cpu time.
1995-09-26 03:53:46 +00:00
f33cf7c909
Correct cgtwo address.
1995-09-25 22:33:37 +00:00
f28ebc66ca
Fix SCC bug that broke getty on pmax SCC lines: if RAW and LITOUT were
...
both off, haracters with their top bit clear were interpreted as a delay.
This (strange) behaviour is still available if SCC_PARITY_MEANS_DELAY
is defined.
1995-09-25 22:10:56 +00:00
95a27d405b
Update pmax kernel to compile with -Werror:
...
update MAXINE desktop bus driver to pass a softc to interrupt
handler. The softc is still statically allocated.
1995-09-25 21:12:33 +00:00
ed4d846a84
Update pmax kernel to compile with -Werror:
...
Add prototypes to the driver switch for old-style 4.4bsd/pmax device drivers
(i.e., the old pmax SCSI drivers).
1995-09-25 21:10:03 +00:00
51d59ca152
Update pmax kernel to compile with -Werror:
...
Fix the initializer of the prom bootinit() function, to take a char* that's
(presumably) the name of the file to boot -- even though it's not used.
1995-09-25 21:06:29 +00:00
cd887a9930
Add "kvtophys()", which maps MIPS R2000 kernel-virtual addresses to physical addresses,
...
so they can (e.g.) be written to DMA mapping registers.
1995-09-25 20:36:23 +00:00
b47de9fb69
new "xy" disk device driver from me.
...
the "xy" driver runs Xylogics 450/451 SMD disk controllers.
1995-09-25 20:35:14 +00:00
06bd2712e9
Update pmax kernel to compile with -Werror:
...
Update TURBOChannel and ioasic interrupt-establish routines to pass on their
device argument as a "void *", since that's how all the pmax interrupt handlers
are declared.
1995-09-25 20:33:26 +00:00
25563b1f82
add config info for "xy" xylogics 450/451 driver
1995-09-25 20:27:30 +00:00
8d19642cd6
add "xy" xylogics 450/451 config stuff
1995-09-25 20:20:27 +00:00
1779adf6be
minor cleanups:
...
- don't let pcyl go unassigned if we have a non-sunos disklabel.
if nothing else, guess pcyl = ncyl + acyl.
- don't use bogus disklabel data if disk label is invalid
(xdgetdisklabel() now returns if label was ok or not).
- move xddriver decl. before start of actual code (cleanup).
1995-09-25 20:12:44 +00:00
2aff99a206
bug fix: xddummystrat() was clearing all but B_BUSY when it should
...
have been clearing just B_BUSY (s/B_BUSY/~B_BUSY/). this
fixes hard hang when reading disklabel when booting system.
minor clean up: added a few prototypes and only fool with bootpath
if booting the system (in xdattach).
1995-09-25 16:02:09 +00:00
27361456c5
Force a delay after calling SCC_WRITE_DATA() to give the chip
...
registers time to settle. DELAY(2) is reportedly enough. Without the
delay, output characters are occasionally doubled.
1995-09-25 04:30:43 +00:00
7bb66692c0
Add fine-grain clock code which uses the 25 MHz TURBOChannel bus-cycle
...
counter on 5k/240s to interpolate to microsecond-resolution clock
in microtime(). Only the "rev B" ASIC in 5k/240s is known to have
this counter; other models may or may not. This gives microsecond
resolution at user-level, and up to 40ns resolution (modulo the
nominal 5(?) 40MHz cpu cycles for reads to complete) in the kernel.
Change the IOASIC reset function to set up the DMA mapping for the
53c94. Allocate 16 Kbytes of DMA buffer for 53c94 ASCs under an IOASIC,
as the 3MAX baseboard and TC options have 128 Kbytes of static
bounce buffer, and the drivers really _should_ support 16Kbyte
I/O requests. (They don't always.)
Give the LANCE a hard reset on 5k/240s, just to be on the safe side.
(the 5k/240 I use sometimes reported errors at boot time.)
1995-09-25 04:21:01 +00:00
462ef77234
Use the new "struct rconsole"; changes I apparently forgot to commit with
...
pmax/dev/fb.c.
1995-09-24 23:13:00 +00:00
825bd034de
Move pseudo swap block device to major 4 to make way for `xy'.
1995-09-24 20:45:27 +00:00
4d52f57876
Add Technology Works ethernet card. From
...
Kazunari Nakamura <kazu@nkk.co.jp>.
1995-09-24 14:13:56 +00:00
a33b9f4fdb
Assume primary swap is `b' partition, not `root partition + 1'.
1995-09-24 02:18:11 +00:00
4408ec71bf
init bad144 table before we actually try and read anything from the
...
disk, rather than init'ing after reading block 0 [in case we get an
error reading block zero].
1995-09-24 00:27:59 +00:00
44561deb01
Add support for the FX-card - Falcon mem. extension - (Nat!)
1995-09-23 20:31:21 +00:00
7af927b56d
Make sure the prototypes and inline definitions are included.
1995-09-23 20:29:16 +00:00
afea10f476
Correct mapping for new (iso-8859-1) fontsets (Thomas Gerner).
1995-09-23 20:27:15 +00:00
f28a41635b
Make them compliant to iso-8859-1 (Thomas Gerner).
1995-09-23 20:25:34 +00:00
c150cc4d37
PROF -> GPROF
1995-09-23 20:23:28 +00:00
e44fc4282e
Use -msoft-float as suggested by Gordon Ross.
1995-09-23 20:22:01 +00:00
3810bc32eb
Compile the system installation program and install it in /usr/mdec/rbootd
...
as SYS_INST.
1995-09-23 17:40:54 +00:00
a8c323442d
Add a standalone system installation program. Currently implements:
...
* Prompt user for disklabel information and label disk.
* Copy miniroot image from NFS server to `b' partition.
* Boot kernel in miniroot image into single-user mode.
Hooks for tape support are there, but the meat for that isn't implemented yet.
1995-09-23 17:38:51 +00:00
a35f639de0
If compiled for the system installation program, prompt for myip, gateip,
...
netmask, serverip, and path rather than using rarp/bootparam.
Catch up with libsa changes.
1995-09-23 17:31:10 +00:00
d429f2e11f
Re-arrange a mite; for the system installation program. Catch up with libsa
...
changes.
1995-09-23 17:28:11 +00:00
188f6e6912
Add *close() routines. Basically, zaps softc structure so that partition
...
information will be re-loaded upon next open.
Catch up with libsa changes.
1995-09-23 17:19:58 +00:00
b8e9fb1b0b
Catch up with libsa changes.
1995-09-23 17:17:03 +00:00
2572267bae
relocation_info added.
1995-09-23 14:57:40 +00:00
96163f6aa5
fix typo
1995-09-23 13:42:03 +00:00
40a6506694
add memcpy entry
1995-09-23 08:14:36 +00:00
23ee56022d
Cleanup, and catch up with libsa changes.
1995-09-23 03:42:17 +00:00
13d9b9d700
Sync up with the sparc version.
1995-09-23 03:40:28 +00:00
e23598f24f
Much improved pdma transfers.
...
Still not nearly as fast as FWB's drivers under the MacOS.
Uses the "blind" transfer method instead of polled pdma.
1995-09-23 01:11:42 +00:00
21f7aa38f6
Update the pmax rcons pseudo-device driver to work with the sys/dev/rcons
...
version of rconsole.
1995-09-22 23:48:20 +00:00
7ed7d6148f
Move the C struct to the properly protected place.
1995-09-22 23:19:30 +00:00
42662e7b9c
Need <sys/mount.h>
1995-09-22 15:29:33 +00:00
f03897c2b6
"Oops." Get the declaration of sys_arch() correct.
1995-09-22 15:27:10 +00:00
d1234038d4
Rename the force-all-pending-writes to memory function to wbflush().
...
Keep the old Mach-derived name "MachEmptyWriteBuffer()" as an alternate
entry point.
1995-09-21 23:28:31 +00:00
7c36f209e7
Need <sys/mount.h> now.
1995-09-21 22:26:04 +00:00
fc919965e8
Make sunos_sigreturn() match prototype.
1995-09-21 11:41:04 +00:00
01be7f2b8c
Need sys/mount.h for fhandle_t.
1995-09-21 11:27:43 +00:00
4a9cf8407c
Fix a warning.
1995-09-21 11:13:27 +00:00
ddf9c6da16
Add 4 vnds to each, add 4 ccds to GENERIC, update BASALT to match
...
current reality.
1995-09-21 07:27:52 +00:00
fbd9919364
Fix warning and use __P for prototypes.
1995-09-21 03:36:25 +00:00
b895726b5c
MACCCLASSIC is Color classic. And it's more like an LC than hopeless.
1995-09-21 01:56:31 +00:00
gwr