mycroft
1fd9249360
Attempt to fix sbp2_free() so that it doesn't core dump. As noted in PR 21099,
...
but fixed differently.
2004-06-29 11:10:29 +00:00
christos
a0d397a023
return an error on invalid mode.
2004-05-13 17:34:48 +00:00
lukem
388ed266e4
rework messages so that 'fw0: maximum receive packet (2) is too small' error
...
doesn't appear corrupted.
2004-04-30 01:31:43 +00:00
enami
6c4e6273df
xs->timeout is in milliseconds so convert it to tick before passing
...
it to callout_reset().
2004-02-13 21:22:13 +00:00
keihan
b8702f530b
netbsd.org -> NetBSD.org
...
This was the last commit of this kind to src/sys, which is now totally
"NetBSD.org clean". Thanks for the patiance, and sorry for all the commits.
2003-12-04 13:57:30 +00:00
fvdl
5602142448
Fix unitialized var warning, add a comment to indicate that it's use
...
is suspect.
2003-10-26 21:03:34 +00:00
christos
5220c0436c
Fix unitialized variable warnings.
2003-10-26 19:10:42 +00:00
mjl
088da88a56
Typos in comments. From OpenBSD.
2003-10-22 09:02:49 +00:00
enami
e7533e9811
Don't limit xfer size to SBP2_MAXPHYS. Its not transfer size limit
...
but just a threshold how to describe transfer.
2003-10-18 12:47:28 +00:00
mrg
9abaf7289a
sprinkle some LL suffixes on >32 bit number literals
2003-08-04 07:00:19 +00:00
lukem
365cbd9428
add missing __KERNEL_RCSID()
2003-07-14 15:47:00 +00:00
itojun
7f6ed16ef4
function prototype must not have variable name
2003-07-08 10:06:28 +00:00
drochner
9897b6dfac
maintain statistics counters
2003-07-03 11:36:18 +00:00
fvdl
d5aece61d6
Back out the lwp/ktrace changes. They contained a lot of colateral damage,
...
and need to be examined and discussed more.
2003-06-29 22:28:00 +00:00
darrenr
960df3c8d1
Pass lwp pointers throughtout the kernel, as required, so that the lwpid can
...
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
2003-06-28 14:20:43 +00:00
haya
5ae8bbc4cc
Bugfix: fwohci_ir_read(): loop continues when the buffer size not only
...
greater than but also same as packet size. This bug is pointed out by
FUKAUMI Naoki.
2003-05-26 16:10:36 +00:00
wiz
1ffa7b76c4
DMA, not dma nor Dma.
2003-05-03 18:10:37 +00:00
christos
d77be05384
PR/20982: Eric Fair: fix debugging printf format errors.
2003-04-02 21:53:15 +00:00
jmc
4829a1952a
Redo last fix to work correctly. Need to run abort on each orb (though it
...
doesn't much now it will eventually) and then so a proper sbp2_free_orb.
2003-03-07 20:18:57 +00:00
drochner
c0e23f3152
-Fix ORB queue corruption / use of free()d memory
...
caused by bad interaction of sbp2_free() and sbp2_abort().
sbp2_abort() requires that its argument ORB is on the
"active" list, and it puts it onto the freelist - sometimes.
So we had 2 causes of corruption:
-removing the ORB from a list which it isn't on
-free()ing recycleable items on the ORB freelist
-minor cosmetics
2003-03-07 16:29:33 +00:00
enami
fa6061e7a4
Make this file compiles when FW_DEBUG is defined but SBP2_DEBUG isn't defined.
2003-02-28 23:31:41 +00:00
thorpej
e354490475
Use aprint_*().
2003-01-31 02:15:57 +00:00
thorpej
a5fa1cfd6a
Use PRIx64 to get the correct format for 64-bit hex numbers. Don't
...
need \n at the end of a panic().
2003-01-09 19:16:30 +00:00
wiz
c6f1277bfa
synchronous, not syncronous.
2003-01-06 13:10:25 +00:00
jmc
216f0f8cde
Add some missing splx()'s noted by Krister Walfridsson
2003-01-05 08:11:33 +00:00
jmc
da000bb65b
Remove arbitrary bufcnt limit in at_output.
2003-01-05 08:03:45 +00:00
thorpej
72a7af27b0
Use aprint_normal() in cfprint routines.
2003-01-01 00:10:15 +00:00
jmc
549904564e
Implementation of page table support for 64k or greater transfers. This should
...
also handle uio structs passed in as well. All standard filesystem actions
are working at this stage (can copy, execute, mount, umount, fsck, etc).
2002-12-28 10:54:47 +00:00
jmc
ae8cc0726d
Move SBP data area's below the 4G mark as some broken devices seem to clip data
...
address's to 32 bits.
XXX - Need to move the if_fw fifo addr as well but this needs some testing
2002-12-28 10:52:41 +00:00
jmc
8630685f69
Add support for page tables
2002-12-19 09:59:47 +00:00
jmc
ef48ba7693
Add a minphys routine since the single largest packet is less than minphys()
2002-12-19 09:58:24 +00:00
jmc
31f02beb7c
Add defines for supporting page tables
2002-12-19 09:56:10 +00:00
jmc
9980e6b848
Updates
2002-12-19 07:22:40 +00:00
jmc
092fe54e3d
Add additional debugging for fwohci_arrq_input: no listener conditions
2002-12-19 02:15:31 +00:00
jmc
62da7b9c60
Add SBP2_MAXPHYS
2002-12-18 06:08:21 +00:00
jmc
fe19747374
Redo state handling as ack's, status, etc can come in and be processed in
...
various orders depending how the upper level driver is flushing it's queue's.
This prevents the deadlocks I was seeing before with >8k writes.
XXX: Still not completely there as > 64k copies trigger bugs and the page
table support still needs to be written to break those down.
2002-12-18 04:48:33 +00:00
jmc
e627b7fefc
Improve performance with disks almost 60x by redoing the callback handler to
...
accept ranges as well as single addresses. Still need to go through any key
areas and remove the malloc's and replace these with some sort of pooling
instead.
2002-12-13 07:47:52 +00:00
jmc
0215635717
Checkpoint commit:
...
1. Reduce debugging level to sane levels
2. Fix bugs in alloc_data_map related to allocing whole bytes of bitmap at
a time.
At this point the driver is functional. It talks to a local drive here and
can label/newfs. Performance is...lacking at the moment as its chewing cpu
heavily (probably due to the number of memcpy's) and will be the next area
attacked.
2002-12-09 23:42:53 +00:00
jmc
151668ce8d
Drop default debugging level to something a bit more sane
2002-12-09 23:39:18 +00:00
jmc
33736c059a
Ooops...Make sure for status to set error and resid before calling the
...
completion routines. Makes reads actually return data to userland now which
means I can now put a disklabel on the drive.
2002-12-09 22:28:21 +00:00
jmc
4d74b607a2
Restructure how the at_output dma map gets setup. Ask for a dma map that can
...
support up to the max ohci descriptor segments. Then attempt to fill it in
via a load. Use the number of segments filled in as the basis for figuring
out how many descriptors to supply to the ohci DMA engine.
XXX: Still needs to account for requests which because of splits may overflow
the 6 dma descriptors available today. For now this fixes cases where a
single 512 byte write was getting split into 2 dma segments from 1 incoming
iov request
2002-12-09 09:09:54 +00:00
jmc
2a3e786250
Fix fwohci_write's sanity check against large packets. Max rec is only used
...
when writing directly to the device (ala IEEE1394_TCODE_WRITE_REQ_BLOCK).
Otherwise the largest size is determined strictly by speed
2002-12-09 07:26:02 +00:00
jmc
11b3f4e7d1
Provide a macro for turning a speed number into a max rec value
2002-12-09 07:24:57 +00:00
jmc
3d5ded55c7
Write sbp2_free_data_mapping and fix a bug where read responses weren't sending
...
back the right tlabel
2002-12-09 07:23:43 +00:00
jmc
1f133763ba
Don't need sbp2_datamapping. Each one is tracked via the associated orb
2002-12-09 07:23:24 +00:00
jmc
9bea8ca9b7
Fix logic screwup in determining which bits to set in alloc'ing data maps
2002-12-08 05:59:05 +00:00
jmc
5a69251dd8
Account for corner cases better in alloc_data_mapping and only ask for a 16s
...
reconnect time instead of 2^16s
2002-12-06 02:19:34 +00:00
jmc
9e81590397
Fill in sc1394_node_id after a self id cycle
2002-12-06 02:17:30 +00:00
jmc
9a4d03f9b2
Add a def for a smaller reconnect time that will be used by default
2002-12-06 02:14:59 +00:00
agc
ecc0017939
Cast appropriately so that this compiles on sparc, sparc64, macppc etc.
2002-12-05 12:22:37 +00:00