7052e9949b
Change the data access busification functions to
...
the "stream" busification functions.
In the architecture as the BeBox(CPU is big endian, have ISA bus),
These methods would be used where "raw" data needs to {read,write,set}
unchanged.
Add #ifndef __BUS_SPACE_NEED_STREAM_METHODS (define that on NetBSD/bebox),
if not define __BUS_SPACE_NEED_STREAM_METHODS,
define "stream" busification functions to normal busification functions.
1998-02-03 04:26:45 +00:00
9c46cdbef5
in ofbattach(), don't both doing an ofbprint() by hand if the root node.
...
The old ofbprint() wasn't particularly good (it forced the root node
to have a 'name' property, which apparently violates the OFW spec), and
the new one (though it normally prints more useful information) has
nothing useful to say about the root node. It's not clear to me that
'ofroot' should exist at all.
1998-02-03 00:43:46 +00:00
9bffcfef75
change #ifdefs keying on "alpha" to key on "__NO_SOFT_SERIAL_INTERRUPT"
...
instead, and define that on NetBSD/alpha and NetBSD/arm32.
1998-02-02 23:01:02 +00:00
c2f42b2213
Implement a flag to indicate that the driver attached correctly.
...
This is useful in the case where an attachment's probe routine
verifies that there is indeed hardware present but something goes
"wrong" in the attach causing the device to be unusable. (Without
keeping track of this, in that case incorrect ports could be
accessed or uninitted pointers could be deferenced on open or at
other times.)
1998-02-02 22:54:55 +00:00
ac4b4ec31d
make ofbprint() use of_nodename(). cleanup.
1998-02-02 22:00:07 +00:00
5169537359
add of_nodename(), a function to stuff the last component of a node's
...
name into a caller-provided buffer (helpful for generating
autoconfiguration output). Also, other minor cleanup.
1998-02-02 21:56:16 +00:00
c9249eced0
add a prototype for of_nodename(), a function to stuff the last
...
component of a node's name into a caller-provided buffer (helpful
for generating autoconfiguration output).
1998-02-02 21:55:23 +00:00
69d33afe72
Prototype OF_getproplen().
1998-02-02 21:00:13 +00:00
b01ada14d9
fix up the power management code to dtrt with the 3c562A mfc card (and
...
hopefully the other variants)
1998-02-01 23:52:25 +00:00
6b68f8b698
use an array of serial devices, not a cascaded if
...
add power management support
1998-02-01 23:50:52 +00:00
3a3ac64f4f
rewrite mfc intr management not to use unexported spl* functions
...
add mfc iobase/iosize support
add power management support
1998-02-01 23:49:02 +00:00
cdc3013464
whitespace changes for readability
1998-02-01 23:38:44 +00:00
57e56a34bc
add state to struct pcmcia_function for mfc iobase/iosize support
1998-02-01 23:38:06 +00:00
5c17882e45
move pcic_wait_ready from i82365var.h to i82365.c
1998-02-01 23:36:23 +00:00
63f5e2bbc3
move pcic_wait_ready to i82365.c
1998-02-01 23:33:51 +00:00
1d4b77e754
split com_attach_subr into attach stuff and per-open initialization stuff
...
add timeouts to all splserial() while loops so bugs elsewhere don't cause
the com driver to wedge the machine
add power management support
1998-02-01 23:33:01 +00:00
a71698f108
add power management hooks to softc
1998-02-01 23:30:49 +00:00
fa75c2d647
Fix two harmless typographical errors in a comment.
1998-02-01 19:25:44 +00:00
f3ee364e31
* Make sure the `ECB_NEXUS' flag accurately reflects the existence of
...
an initiator/target nexus and thus mark the correct queue (if any) a
command is on.
* If a disconnected command times out, just leave it on the nexus queue
and do nothing (for now). I need yet to decide on the strategy to
follow in this case. Note: we used to move the command to the `ready'
queue and then do nothing, which is worse.
1998-01-31 23:37:51 +00:00
5ba817c967
Don't hardcode the interrupt type; use what the pnp config provided to us.
1998-01-31 21:31:35 +00:00
1caaa1f520
PR/4883: Andreas Wrede: Check for wildcard mem address not io ports.
1998-01-31 11:23:35 +00:00
480445c035
When a PCI bus is attached, print out which bus spaces were enabled
...
by the parent.
1998-01-31 00:37:39 +00:00
d411251c64
Fix for the vibra16x from Lennart Augusts: saying that the dsp4.16 was
...
a SB64 was just a guess. The vibra16x is really a sb16.
1998-01-30 11:55:36 +00:00
605c219597
Add ID for the Vibra16X PnP board (aka CT4170).
1998-01-30 11:42:51 +00:00
cec1781573
Regen.
1998-01-30 02:25:28 +00:00
8b75f90a86
Add entries for the PMAZ-DS and PMAZ-FS (Flamingo Turbochannel Dual SCSI
...
baseboard devices, normal and fast), and the PMAZB-AA and PMAZC-AA
(Turbochannel Dual SCSI option cards, normal and fast).
1998-01-30 02:24:58 +00:00
6f6593a533
Fix initialization and timing problem.
...
As per misc/4902, from Clifford Wright <cliff@snipe444.org>.
1998-01-30 02:02:38 +00:00
78650a8398
Use offsetof() from libkern.h
1998-01-30 01:26:51 +00:00
a7bc6bd92c
In the NE2000 case, if we encounter an unaligned mbuf, copy it to an
...
aligned buffer so that we can do 16-bit PIO to the device without causing
an unaligned access fault.
1998-01-29 00:59:33 +00:00
99139bc35a
Fix for port-alpha/4903- always download f/w unless config flags say
...
no or we have no firmware to download.
1998-01-28 19:09:24 +00:00
9359316f6f
Add support for the 82553[AC] PHY by treating it like an 82555. From
...
Soren S. Jorvang <soren@t.dk>, PR #4840 .
1998-01-28 18:31:37 +00:00
b89119c134
Convert this driver to use the bus_dma interfaces.
1998-01-28 07:26:42 +00:00
5cafda5b3c
Update 2100 F/W to 1.10 level. Also remove some older 2100 f/w versions.
...
This version of the 1.10 f/w is initiator only (not initiator/target).
1998-01-28 06:09:02 +00:00
2538ed1062
Use offsetof() from libkern.h
1998-01-28 02:23:04 +00:00
08af1cdbbc
prototype of_compatible
1998-01-28 00:01:34 +00:00
b4026f2974
clean up comments and includes. add an of_compatible() function
...
which checks for the presence of any of a set of caller-provided
strings in a node's "compatible" property (the _right_ way to
determine driver compatibility).
1998-01-28 00:01:01 +00:00
9e47d44515
Make sure the data after the Ethernet header is aligned. (It's been
...
in the Shark source tree for a while, but Jason's recent commit to
dp8390.c spurred me to check it in here.)
XXX Assumes the device is an ethernet, but then so does other code in
this driver.
1998-01-27 23:55:18 +00:00
cdec42b6a0
Fudge the start of the data pointer of the first mbuf in the chain when
...
reading a packet, ensuring that the data after the Ethernet header will
be aligned. Part of PR #4595 , from Andreas Johansson <ajo@wopr.campus.luth.se>
1998-01-27 23:26:21 +00:00
6f8773dd64
I'm not responsible for this address window splitting hack, but I fix it
...
anyway.
1998-01-27 19:14:18 +00:00
c7c415e733
Regen: add Packet Engines G-NIC gigabit Ethernet.
1998-01-27 01:03:29 +00:00
cdb46f9d8b
Add product ID for the Packet Engines G-NIC gigabit Ethernet interface.
1998-01-27 01:02:46 +00:00
e73453eaf8
In vndsetcred(): after establishing credentials, flush all buffers
...
associated with the vnode from the buffer cache. This obviates the
need to flush the buffer cache manually after ``vnconfig -u''.
1998-01-26 23:30:44 +00:00
ed02c60bdd
clean up for other changes (removal of ofnmmatch(), addition of
...
of_decode_int()), reorganize.
1998-01-26 21:49:13 +00:00
b7c7fd66d0
of_decode_int() the stdin and stdout properties.
1998-01-26 21:49:00 +00:00
cf90ace319
new file containing common OFW-related routines. Right now just contains
...
of_decode_int(), a function which decodes OFW integer properties.
1998-01-26 21:48:40 +00:00
cdfa209843
(1) kill ofnmmatch(); nothing used it (and it's not clear that
...
anything _should_ use it).
(2) in the child properties check, also check for 'compatible,' and
config_found() if the child has it.
1998-01-26 21:48:07 +00:00
0aee587bbf
add ofw_subr.c, a file containing common OFW routines.
1998-01-26 21:47:35 +00:00
243c218061
Update copyright.
1998-01-26 20:30:06 +00:00
044add4253
If we're using these devices on a big-endian CPU, byte swap the "count"
...
field in the dp8390's packet header (because the dp8390 runs in little-endian
mode in these cases). Inspired by an e-mail from Kazuki Sakamoto.
1998-01-26 19:21:36 +00:00
e8cf0c444c
Make sure we create DMA maps if the CD4231 probe fails.
1998-01-25 23:48:06 +00:00
sakamoto