ragge
f9ee92c45a
Support installation of /usr/mdec files.
1996-03-16 11:03:11 +00:00
ragge
33aad32f37
Accept adapter numbering in boot.
1996-03-16 11:02:28 +00:00
jtc
2ce5f1478b
Add _BSD_WINT_T_ definition so we can handle wint_t type added in NA1.
1996-03-16 01:31:45 +00:00
christos
25b31cbc91
fdopen -> filedescopen
1996-03-14 21:31:56 +00:00
ragge
f01a5dd8cc
We lost declaration of kernel_pmap_store somewhere, put it back.
1996-03-09 23:39:51 +00:00
ragge
3a07f941ba
Check on which SBI we are frobbing, not always 0.
1996-03-09 23:38:34 +00:00
ragge
24b2b310ae
Add support for ktracing syscalls.
1996-03-09 23:37:20 +00:00
ragge
4ee5419b8a
Panic on SBI fault.
1996-03-09 23:36:40 +00:00
ragge
c7282ed159
Change NTU to NHT.
1996-03-09 23:36:09 +00:00
ragge
ba7706dd3c
Files to generate usable console RL02 packs on 8600.
1996-03-08 12:41:33 +00:00
ragge
3ac9ff6af4
Support for the RL02 disk at the PDP11 frontend console added.
1996-03-08 12:32:47 +00:00
ragge
6e51b1e47e
Support for VAX 8600/8650 added. Works with lots of Unibus adapters,
...
and will probably work with Massbus adapters as well. (Not tested,
but it's the same code as for 11/780). Ubareset's may cause crashes
on 8600 also like 11/780, but they are more uncommon. No support
for console RL02 yet, but it's likely to come.
1996-03-07 23:22:34 +00:00
ragge
3f09ddf89f
Fix of MicroVAX clock chip code, so that time sets right after reboot.
...
Fix done by Ken Wellsch.
1996-03-07 23:03:03 +00:00
cgd
18ec26aa21
add _MACHINE and _MACHINE_ARCH, which are like MACHINE and MACHINE_ARCH,
...
execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
1996-03-04 05:04:10 +00:00
ragge
c2ce0848e2
Added ns_cksum.c.
1996-03-03 11:56:33 +00:00
ragge
c76bb64058
Machine-optimized version of ns_cksum.c.
1996-03-03 11:54:37 +00:00
ragge
c22fc0bce4
Enable label_t.
1996-03-03 11:21:31 +00:00
ragge
e82da18ec2
Fix include file ordering.
1996-03-03 11:18:59 +00:00
ragge
f2bcddae7f
Fix fuswintr/suswintr arguments to match prototype.
1996-03-03 11:17:59 +00:00
ragge
7ade5ebd76
Files needed to create boot floppies for 11/780, most of them
...
taken directly from 4.4BSD.
1996-03-02 17:57:34 +00:00
ragge
ffc8953cd7
Change config delay's to more reasonable values.
1996-03-02 14:29:23 +00:00
ragge
5d89814116
Changes due to 11/780 support. Raise splimp() to BR7.
1996-03-02 14:27:52 +00:00
ragge
cef093b42e
Add VAX780 support to the boot program.
1996-03-02 14:22:57 +00:00
ragge
8fbcb8ce5a
Add VAX780 and DHU11 to the GENERIC file. Put the corresponding
...
file lines in files.vax.
1996-03-02 14:19:47 +00:00
ragge
10fe8f1971
All devices can now be in GENERIC.
1996-03-02 14:14:05 +00:00
ragge
827892239a
Add support for DW780. Note that ubareset's don't work properly.
...
This is not a problem on other Unibus adapters, but DW780's do
ubareset's more often. This needs to be fixed by someone someday.
1996-03-02 14:09:57 +00:00
ragge
89e32834cd
Fix some too long delays. Set some structs volatile that otherwise
...
caused hangs during autoconfig.
1996-03-02 14:06:03 +00:00
ragge
508f81daca
Support for VAX 11/780 - 11/785 system types added.
...
There are no support (yet) for the RX01 console floppy,
even if it is actually needed to create boot floppies.
(The arff utility is also missing, so...)
1996-03-02 13:45:34 +00:00
ragge
a14bb8a710
Add a #ifdef TUDEBUG around a printf statement.
1996-03-02 13:41:24 +00:00
ragge
c45af1134a
Unibus/Q22 bus device driver for DHU-11 serial card.
...
Written by Ken Wellsch. (kcwellsc@math.uwaterloo.ca )
1996-03-02 13:30:53 +00:00
cgd
1c5d7babe5
Clean up tabbing/spacing in defns of MACHINE, MACHINE_ARCH, and MID_MACHINE.
1996-03-01 23:30:08 +00:00
cgd
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
mycroft
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
ragge
1376f92db9
Add routine to convert phys device number to kernel unit number.
...
Allow to set disklabel area writable.
1996-02-24 21:22:54 +00:00
ragge
f2aaea55c2
Make setroot() grok where we boot from even if it is hp disks.
1996-02-24 21:20:01 +00:00
ragge
df5a5e9485
Remove __FORK_BRAINDAMAGE, and the reason to why it was there.
1996-02-24 15:17:35 +00:00
ragge
2294cbd022
Fixed bug causing DMA to user stack from Massbus disks to give segfaults.
1996-02-23 17:54:33 +00:00
ragge
2aa22f8fbf
Allow rewriting of disk label after newfs.
1996-02-23 17:29:01 +00:00
ragge
aeaef139aa
Console TU58 device driver for 11/750 added.
...
It cannot write tapes yes, but reading works OK.
1996-02-17 18:48:53 +00:00
ragge
90b84d2da5
Add standalone driver for TU58 (DECtape II). Now initial installation
...
from TU58 on 11/750 is possible.
Change types on pte pointers, due to the change of pte's from
int to struct pte.
1996-02-17 18:23:18 +00:00
ragge
5025b0f9c9
Definition file for RSP (Radial Serial Protocol) used by DECtape II.
1996-02-17 18:14:50 +00:00
ragge
2395bee98d
Much faster copyin/copyout subroutines, written by Ken Wellsch.
...
Improved user-space network I/O (like ftp) with about 1.7 times!
1996-02-13 17:45:32 +00:00
mycroft
27a9f5bd9c
Fix #include syntax.
1996-02-13 06:56:58 +00:00
ragge
183d234ae4
Add prototypes.
1996-02-11 13:47:55 +00:00
ragge
4cafd3d7d2
PAGE_SIZE should be PAGE_SHIFT. Really ugly bug!
1996-02-11 13:46:23 +00:00
ragge
26d151d2bb
Prototype for delay().
1996-02-11 13:45:37 +00:00
ragge
dfecf19e9f
Fix cpu_sysctl() arguments to be like prototype.
1996-02-11 13:43:37 +00:00
ragge
550f120337
Fix things that -O2 broke. Cleanup.
1996-02-11 13:41:35 +00:00
ragge
bb75a13fbb
Cleanup & convert to KNF.
1996-02-11 13:39:54 +00:00
ragge
998626f339
Add VAX650, mba, hp, ts. Change uba to be *'ed.
1996-02-11 13:28:25 +00:00