device doesn't support flushing the cache. Fixes an issue (reported
privately) where ST39120A drives are not capable of flushing the
cache, and RAIDFrame was incessantly complaining.
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)
See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html
Reviewed by abs@ in private mail.
shutting down -- this is only supposed to happen from the pcmcia
kernel thread while the system is running
-in wd_shutdown, call ata_addref first, so that the adapter is either
active or we know that it isn't
This fixes a hang on shutdown-p reported by Dennis den Brok per
PR kern/40531. Verified by by Dennis and me.
(reported against 5.0-Beta, so this is a pullup candidate)
handler for them.
Don't override the latency timer set for us by the CardBus code.
Add a bit of debug code for the Function Event Registers, #if 0'd
out for now.
Cosmetic: remove gratuitous parenthesization of return statements.
Change the indentation of the struct atw_pci_softc definition.
Use a more meaningful variable name, et cetera.
addresses, rather than trying to read a byte of data from the device.
Some devices don't like to be read from (certain clock devices are, I'm
told, write-only!), while others expect to be asked only for words (or
pairs of bytes).
While here, skip a bunch of i2c addresses that can't (or at the very
least, shouldn't) have any slave devices.
This is the only use in NetBSD of the quick_read/quick_write protocol,
and it remains disabled by default. I've updated all the generic i2c
drivers to handle the quick_* protocols, but several port-specific
drivers have not been updated since I'm in no position to verify that
the changes work. Assistance from sandpoint, arm/xscale, evbarm/gumstix,
mips/alchemy, and macppc would be greatly appreciated.
routine, since we have already have the iic_smbus_* interfaces.
NOTE: i2c controllers that provide their own i2c_exec() routine also need
to be modified. I'll be committing most of these shortly.
where INTA is asserted while no enabled interrupts are pending, which
cause a continous strean if interrupts with no way to clear it.
Clearing/resetting the enabled interrupt mask in the interrupt handler seems
to workaround this issue (this is what the FreeBSD driver does).
While there properly return 0 if the interrupt was not for us, and explicitely
disable JME_TMCSR in addition to TIMER1 and TIMER2.
Switch to polling mode after the acpi(4) device has been suspended as
interrupts will be disabled later on and we may still need to execute
AML that tries to sleep or wait on a semaphore.
sense structures in icp_scr map; otherwise we'll compute an offset past the
allocated memory (and past the end of the dmap map) from the ic_ident.
To be safe use ICP_NCCB_RESERVE instead of 2; as I'm not sure why
ICP_NCCB_RESERVE is 4.
panics.
Extract a new function, bnx_add_buf(), from bnx_get_buf().
bnx_add_buf() just tries to add an mbuf to the Rx chain. bnx_get_buf()
tries to allocate an mbuf, first, and then to add the mbuf to the
chain. Use bnx_add_buf() to try to put an mbuf that we took off
of the chain back onto the chain, and use bnx_get_buf() everywhere
else.
This change seems to be in keeping with the author's intent, but
it looks like the code broke at some point.
Thanks to Jarle Greipsland, David Dudley, and others for reporting
this bug and for testing patches.
upc_submatch() whereby it made sure that the correct driver attached.
Since this didn't really belong in the submatch function anyway,
reintroduce it in the match functions for upc's children.
This allows my A5000 to find at least one of its hard disks.
type/status/etc inquiries. (PR kern/37915)
This is clearly a design problem in tty, but we need a cheap fix now.
The problem is that ttyinput() tries to pull a spinlock which
is already held on calls to t_oproc.
The workaround is based on the fact that within wscons code, the
wsdisplay_emulinput() function is only called directly from
wsdisplaystart(). So we can be sure that the tty lock is held,
and use an inofficial entry point in ttc.c which avoids the locking.
These ate certainly more assumptions than needed by the fix
proposed in the PR, but it doesn't affect (and slow down) other
tty drivers.
Use ETHER_ALIGN to calculate number of segments correctly (actually the same way as FreeBSD and OpenBSD do).
Also use ETHER_ALIGN to correctly adjust new mbufs.
This makes the driver finally work. Tested by Jochen Kunz:
ping -nf 192.168.2.1
PING 192.168.2.1 (192.168.2.1): 56 data bytes
----192.168.2.1 PING Statistics----
28949 packets transmitted, 28949 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.157/0.364/2.272/0.023 ms
2710.6 packets/sec sent, 2710.6 packets/sec received
XXX Shouldn't if_ether.h provide ETHER_ALIGN instead of defining it in all drivers?
devmajor_t/devminor_t, as proposed on tech-kern.
This avoids 64-bit arithmetics and 64-bit printf formats in parts
of the kernel where it is not really useful, and helps clarity.
interrupt context, as my vax kernel with DIAGNOSTIC told me. Instead, we
defer the work and get it to run in thread context via a workqueue(9).
Thanks to matt@ for the review.
ID pair. Misuse of the revision numbers was causing some of the chip
features to be disabled on some integrated Intel chips. So, move the
determination of the features into the bus frontend, where the
vendor/product ID is known. (Note: sc_rev should be removed. The
microcode patch stuff is also busted and needs to be fixed.) Also,
poll the actual flow control status in inphy, rather than making
assumptions.
contributed anonymously.
Unloading doesn't work right in any case -- it doesn't clean up the
sysctl tree, among other things. This code needs Work, but at least
this prevents it crashing randomly due to autounload while X is
running.) Also, fix the dependency list for radeondrm.
contributed anonymously.
Written by Pyun YongHyeon for FreeBSD, ported to DragonFlyBSD
by Sepherosa Ziehau, ported to OpenBSD by Kevin Lo and then
ported to NetBSD by me.
XXX Driver needs testing.
rather than using just drive 0 status. Another drive with a different
status would cause the previous status state to flip-flop and repeatedly
output state change messages.
that we have to run lvm vgchange -a n before modunload in NetBSD.
We really need to disable module unloading only for mounted devices, I have
to look at vfs_hooks for mount/umount calls and find way how to mark devices
as mounted in dm driver.
- reset autonegotation timer if media option is not IFM_AUTO or we got a invalid link.
- Announce link loss right after it happens.
- Autonegotiation is retried every mii_anegticks seconds.
- Report link state changes right after setting autonegotiation.
- use rgephy_reset consistently
- change rgephy_reset to use mii_phy_reset and rgephy_load_dspcode.
These changes give me a speedup from 6.5MB/s to 9.1MB/s on a 100MBit link.
Also: move mutex init/destroy into attach/detach functions and
handle case where line discipline is closed before the irframe
device. Fixes PR kern/40271.
