a3b1c4c87a
Optimize the address CRC routines a bit.
1998-03-29 22:21:12 +00:00
fe7f32954b
Optimize the address CRC routines a bit.
1998-03-29 22:08:03 +00:00
5c8a9ac444
Attach aic at isapnp.
1998-03-29 08:13:43 +00:00
5124116592
ISAPnP attachment for aic6360 (tested with AHA-1520B).
1998-03-29 08:11:50 +00:00
e0436952f0
Split out the verbose printing of scsi messages, so that user programs
...
can use the printing routines.
1998-03-28 21:57:08 +00:00
686a1a1177
Regen.
1998-03-28 06:39:13 +00:00
515d7f04bf
Add the Contaq/Cypress 82C693 PCI-ISA bridge.
1998-03-28 06:38:46 +00:00
2f8f14b311
check vendor against PCI_VENDOR_INVALID instead of 0xffff.
...
Suggested by Soren S. Jorvang.
1998-03-28 02:24:04 +00:00
6108f60999
regen
1998-03-28 02:10:40 +00:00
3371d8f00f
fix bogus produce name tags for 82371FB_ISA and 82371FB_IDE (were 82471FB_*).
...
Pointed out by Soren S. Jorvang. Rename "BAD" vendor id to "INVALID".
1998-03-28 02:09:29 +00:00
9264961c87
add a short delay (5ms) after ATAPI software reset is done, suggested by
...
Soren S. Jorvang <soren@t.dk>. Apparently some devices Really Want this.
1998-03-27 19:32:15 +00:00
46f85eeab2
let all 8 bits go through
1998-03-27 18:26:22 +00:00
cbff98f7ff
fix max() vs min() confusion at 2 places
1998-03-27 18:22:36 +00:00
b9db388b0f
don't use variables declared _inside_ DEBUG in code _outside_ DEBUG
1998-03-26 00:49:03 +00:00
0e4dce88d4
Conditionalize badblock handling on 'HAS_BAD144_HANDLING'. Some ports
...
(like atari) do not support it.
1998-03-25 09:58:24 +00:00
57ca254137
some minor debug printout changes
1998-03-24 23:37:53 +00:00
8adf8abfea
Enable another error message before the driver reboots the machine. It was
...
not being printed if not compiled with DEBUG. Now all situtiations where
the driver gives up should display a message before the reboot.
1998-03-24 20:49:22 +00:00
47d94e4676
fix typo
1998-03-23 16:57:21 +00:00
dbef68a11b
Update for __BROKEN_INDIRECT_CONFIG. Still untested since it is so hard
...
to find testers for these old cards.
1998-03-23 01:00:21 +00:00
fc27ffd92c
update some debugging stuff- also turn off possible ULTRA mode for 1020s
1998-03-22 22:02:29 +00:00
ff0635ab25
Fix error in previous change.
1998-03-22 19:36:52 +00:00
3c346a45ca
The keyboard controller's address range is 5 bytes long - reflect this
...
here.
1998-03-22 15:44:02 +00:00
2390332103
Devices attached to the PC keyboard controller (or its aux port),
...
for use with the new wscons code.
(keyboard map management will change)
1998-03-22 15:41:27 +00:00
b5ec34f082
MI driver for the infamous PC keyboard controller, primarily for use with
...
the new wscons code (but may be interfaced with other drivers as well).
needs testing
1998-03-22 15:25:15 +00:00
013507e321
PCI frontend for sys/dev/ic/vga.c
1998-03-22 15:16:18 +00:00
065733619a
ISA frontend for sys/dev/ic/vga.c
1998-03-22 15:14:35 +00:00
3a43fe7109
initial import of VGA driver backend for use with the new wscons code
1998-03-22 15:11:49 +00:00
b31e63865f
Initial import of cgd's new wscons code.
1998-03-22 14:24:02 +00:00
52c701add6
Make this file compile without BROKRN_INDIRECT_CONFIG.
...
(Brute force - device probe always returns 0. Should be fixed soon.)
1998-03-22 12:50:20 +00:00
5aaf839bc3
Make this file compile without BROKRN_INDIRECT_CONFIG.
...
(Brute force - device probe always returns 0. The driver is replaced
by if_ate, if_fmc and if_mbe and is here for reference only.)
1998-03-22 12:48:41 +00:00
9a8dbd75df
Clone lk20.h (keycode definitions) to /sys/dev/dec.
...
Update source pmax files accordingly.
cvs remove old pmax/dev/lk201.h.
1998-03-22 09:27:07 +00:00
a59689c939
Attach device `mbe' at bus `pcmcia'.
1998-03-22 04:39:56 +00:00
e26f2ce65b
Define new device `ate' and `fmv'.
1998-03-22 04:38:42 +00:00
c02747ba06
PCMCIA bus attachment for MB8696x based Ethernet card.
1998-03-22 04:32:27 +00:00
2b5f7351d2
Split Fujitsu MB9696x based ethernet card driver into bus
...
dependent/independent code and bus.h'fied.
1998-03-22 04:25:36 +00:00
1164bf0fb5
Define TPLFE_TYPE, which is sub code for CISTPL_FUNCE, for LAN card.
1998-03-22 04:07:43 +00:00
f6dba67570
Read up to 32 bytes. The ESCC *needs* 8, and it doesn't hurt to leave some
...
slop in case there are clone chips with a deeper FIFO.
1998-03-22 02:36:02 +00:00
2bb5067e13
Move the code to wait for carrier on a tty into a common function, since it
...
depends only on device-independent state bits.
Implement SunOS-style `dialout' devices.
1998-03-22 00:55:37 +00:00
019508faee
Well, I don't have a Cyclades board, but I needed the alpha kernels
...
to compile. I made the changes that seemed to make sense tracking the
shift from TS_WOPEN to tp->t_wopen- but they may be wrong. I wasn't
subscribed to tech-kern so I missed the discussion, and C. Hannum
was not particularly enlightening. Sorry if this isn't quite right.
1998-03-21 23:26:15 +00:00
69fe6f242f
Account for changed bus attachment scheme.
1998-03-21 20:11:30 +00:00
cad3cb3894
ubasetup() must be non-static. (used by QDSS)
1998-03-21 10:24:29 +00:00
834a8ac07a
Fix pasto.
1998-03-21 04:31:10 +00:00
fd620ebb32
Replace TS_WOPEN with t_wopen, per mail on tech-kern.
1998-03-21 04:29:29 +00:00
16566cda09
Remove a bogus initializer.
1998-03-21 04:27:58 +00:00
2ada4b4af1
Replace TS_WOPEN with t_wopen, per mail on tech-kern.
1998-03-21 04:02:47 +00:00
09cde3ae17
compile with -Wall, update for changes to dev/ofw
1998-03-21 02:06:17 +00:00
0a2c48d07f
-Wall
1998-03-21 02:05:17 +00:00
3cc8b411d0
-Wall (one real bug, even!)
1998-03-21 02:04:55 +00:00
bd31517508
check only the Vendor ID (rather than both the Vendor ID and the Product
...
ID) when determining if the Vendor ID is invalid. The spec says that
Vendor ID of 0xffff is invalid, so, it doesn't _matter_ what the product
ID is in that case. Treat Vendor ID 0 as invalid because we always have.
1998-03-20 19:56:19 +00:00
f80f6601b0
Fix a typo in the bus_dma changes.
1998-03-17 21:30:38 +00:00
d2551d5b3f
Use bus-dma functions.
1998-03-16 15:36:17 +00:00
2397f92b38
Implement CDIOCCLOSE.
1998-03-16 04:17:53 +00:00
85687409e1
don't forget to set dma_arg, when using DMA functions. also, minor
...
spacing bogon cleanup. Pointed out by Kazuki Sakamoto in PR 5157.
1998-03-13 16:50:07 +00:00
b9eaff9db8
when considering attaching compatibility-mode channels, try a quick reset
...
and see if anything responds. if nothing (that's attributable to the
PCI IDE controller) responds, then that channel either has no devices on
it or has been disabled (via a non-standard mechanism) by the BIOS. If nothing
responds, don't map the compat.-mode interrupt or attach the wdc to that
channel, because the BIOS is likely to assign that IRQ to a different PCI
device. If that happens, the kernel will panic because that device will
try to map the IRQ level-triggered, but the compat interrupt will have been
mapped edge-triggered. (One possible way around this is to map the compat
interrupt edge-triggered, but it's not clear reading the spec that this
is correct or desirable.)
1998-03-12 23:34:29 +00:00
44650d03a6
Better fix for PR 5113, per discussion with fvdl: now that the vnode locking
...
interface allow recusive locks, use it instead of the local hack to avoid
recursive locking.
1998-03-12 16:51:41 +00:00
09f43c63cf
Update probing for GUS a little. From soren@t.dk,
...
closes PR kern/5148.
1998-03-12 12:28:50 +00:00
dd709a7f89
Make it possible to interface to big-endian cpu's.
1998-03-11 20:57:03 +00:00
d644f9b973
Apply cs4236 fix from rh@vip.at. Closes PR 5143.
1998-03-11 09:26:05 +00:00
83449d8960
- fix pcmcia_scan_cis to return:
...
-1 error
0 desired tuple not found
1 desired tuple found
1998-03-09 21:54:13 +00:00
441bea9142
- more 3c562 magic; document that the 0x88 tuple only works in 3c562a-c
...
and not in d where it goes back to use the eeprom method. So we detect
when the tuple method fails and fall back to the original method.
- even more 3c562 magic; the updated linux driver mentions that addresses
0x??00-0x??7f only work instead of the previous...
1998-03-09 21:52:31 +00:00
a57a8d66ff
let panic() call DDB, don't do it ourselves; from Nathan Williams in PR 5131
1998-03-09 06:32:51 +00:00
509cb1d75f
- remove duplicate setting of CCR
...
- fix debugging code so that it compiles
- reorder the disabling code so that it is more logical
- add splhigh()/splx() in the first establish setting for symmetry
1998-03-07 17:58:17 +00:00
a294c3fef3
Regen.
1998-03-07 16:48:47 +00:00
8dd96862cd
Add Matrox Millenium II AGP.
1998-03-07 16:43:46 +00:00
8840acb1e2
Quirk table entries for IBM H3171 and Quantum ELS85S disks.
1998-03-07 06:34:59 +00:00
5a34bf2a24
Add Dayna CommuniCard E, from Havard Eidnes, PR #5120 . Also, remove a
...
few unnecessary/no-longer-completely-accurate comments.
1998-03-06 20:00:28 +00:00
ff06be8ce0
reorganize mapping/attachment of wdc channels so that it'll be easier to
...
insert a check to see whether a channel appears to be enabled. Shouldn't
be necessary, according to the spec, but some PC chipsets allow individual
compatibility channels to be disabled. "I hate PCs."
1998-03-06 19:13:19 +00:00
f528463b81
despite the spec, some people map the bus master IDE registers into
...
memory space. Note that in a comment, but don't try to fix it (for now).
1998-03-06 17:41:59 +00:00
6dcfc62169
KNF last change
1998-03-05 22:56:18 +00:00
84c6b9dbd7
Make zs_iflush not loop indefinitly. Some Mac PowerBooks lie about having
...
two SCC channels, and can get stuck in an infinite loop. This change
stops after flushing 4 bytes. Might need upping to 8 bytes if we support
85230 ESCC's.
Idea bounced off of scottr & gwr
1998-03-05 22:03:34 +00:00
775d60ecd7
Use lower case "agc" for consistency.
1998-03-04 19:38:28 +00:00
2682c61855
clean up a printf
1998-03-04 19:19:21 +00:00
c3cdd2752a
slight cleanup (consistency, make a few comments better). add support
...
for recognizing bus-master DMA interface and mapping the regs (but
still no support for DMA).
1998-03-04 19:18:22 +00:00
0078e4bcd0
add def'ns for PCI IDE bus-master DMA interface recognition and register
...
mapping.
1998-03-04 19:17:10 +00:00
713692a2b5
For the Rx:Tx split message change "(undefined)" to "3:5".
1998-03-04 18:10:03 +00:00
ad83e1aac8
Fix vn_lock argument botch. From Manuel Bouyer (PR 5113).
1998-03-04 15:34:41 +00:00
d4e79b6ace
add (commented out) device/file declarations for the MI PCI IDE
...
controller driver. These are commented out here until the wdc
declaration mess is resolved, and until then need to go into MD
files files in places where they play nice with the wdc declaration.
1998-03-04 06:38:44 +00:00
b37b33d302
PCI IDE glue. Right now, just glues 'wdc's to PCI IDE controller
...
channels. Eventually should do things like support PCI IDE DMA (it _DOES
NOT_ do that now).
1998-03-04 06:35:11 +00:00
b11fc105b1
clean up slightly, correct a few comments
1998-03-04 06:31:46 +00:00
5f45920f06
regen
1998-03-04 00:15:21 +00:00
b3f8c3c1f1
fix comment bogon in last commit
1998-03-04 00:14:45 +00:00
34f466e064
regen
1998-03-04 00:10:38 +00:00
0873649bda
add CMD PCI0643, PCI0647, USB0670, USB0673. Remove the 'A' from the 640A
...
entry (because the same product id is used for the 640B, as well). Note
that a few of the entries (PCI0642, PCI0650A) no longer have data to
be found on the CMD web site, and note that PCI0650A should probably have
its "A" trimmed as well.
1998-03-04 00:09:11 +00:00
8a2d9d7d74
in the ATAPI bug workaround code ("HACK"), don't forget to set
...
SCSI_AUTOCONF when executing SCSI commands.
1998-03-03 23:15:36 +00:00
5ac38e9b53
Re-arrange several functions so we no longer need __BROKEN_INDIRECT_CONFIG
...
semantics.
1998-03-03 20:51:20 +00:00
5513bc639f
Cheesily work-around reliance on __BROKEN_INDIRECT_CONFIG; should we
...
bother trying to find the board's memory size in the match routine at all?
1998-03-03 20:50:06 +00:00
44c6ce78d2
Avoid the name free so the MALLOCLOG option works again.
...
Fix some typos.
1998-03-03 09:16:15 +00:00
d8bb682673
drop `ef_softc' from ef_match function.
1998-03-02 23:12:18 +00:00
8e2874bf64
Support for UVM on VAXen.
1998-03-02 17:00:00 +00:00
7ba6a2daac
Remove extraneous files from Lite2 merge.
1998-03-01 13:45:28 +00:00
331fee623e
Sweep up some miscellaneous leftover lite2 integration shrapnel.
1998-03-01 07:15:39 +00:00
e5bc90f40c
Merge with Lite2 + local changes
1998-03-01 02:20:01 +00:00
e8d05f0741
Import 4.4BSD-Lite2
1998-03-01 02:12:49 +00:00
b50e39fa45
Import 4.4BSD-Lite for reference
1998-03-01 02:09:33 +00:00
1fe6513796
Remove extraneous `$Id$' lines.
1998-02-28 20:43:28 +00:00
c0e247427a
This driver is replaced by three i82586 front-end drivers: `ix', `ef' and `ai'.
1998-02-28 20:42:43 +00:00
d22f956657
Remove `_NEW_I82586'.
1998-02-28 01:15:51 +00:00
5bc7459ebd
Remove `NEW_I82586'
1998-02-28 01:14:57 +00:00
9698950530
* Remove `_NEW_I82586'.
...
* KNF.
* erase ghost spaces and tabs.
1998-02-28 01:14:15 +00:00
472a1973af
Remove `_NEW_I82586' tag; all drivers using this file have been converted.
1998-02-28 01:07:45 +00:00
a3a9cbc8c5
Replace the `ie' driver by three separate front-ends: `ix', `ef' and `ai'.
1998-02-27 23:54:16 +00:00
22a8b1ae89
AT&T/StarLan i82586 front-end driver from Rafal Boni.
1998-02-27 23:52:34 +00:00
82153cc305
3Com/3C507 i82586 front-end driver from Rafal Boni.
1998-02-27 23:51:52 +00:00
9bb4839afd
EtherExpress/16 i82586 front-end driver from Rafal Boni.
1998-02-27 23:50:51 +00:00
64812254d6
Remove some duplicate definitions.
1998-02-27 13:17:25 +00:00
8e5dbddc19
Regen.
1998-02-27 11:46:25 +00:00
402ddee537
Add Macronix MX98713.
1998-02-27 11:45:51 +00:00
66f05f52ec
Add another 56K modem.
1998-02-25 13:18:50 +00:00
081231b1ad
Add dummy }} after comsoft() to keep ctags(1) bashing on.
1998-02-25 08:32:35 +00:00
d36067b120
Forcibly NUL-terminate the path name, just to be sure.
1998-02-24 07:14:17 +00:00
64d86b5934
Minor style change.
1998-02-24 07:10:39 +00:00
310f6fefc3
Several things:
...
Clean up the name space here a bit.
Add a `busname' element to struct ofprobe (now struct ofbus_attach_args), and
check against it.
Nuke `ofroot'.
Rename the `openfirm' attribute to `ofbus'.
1998-02-24 05:44:39 +00:00
ccfe537e97
don't include <machine/pio.h>. It's unneeded here now (this code
...
uses the bus_space_* interfaces), and therefore unwanted.
1998-02-24 02:12:09 +00:00
49c1580874
-make compile without BROKEN_INDIRECT_CONFIG
...
-don't include <machine/pio.h>
1998-02-23 14:12:18 +00:00
9b770726e8
Fix message printed in case (b) in last commit; what actually shouldn't
...
exceeds is not a size of partition but end of partition.
1998-02-22 07:14:30 +00:00
512a01869c
Check disklabel just read from disk and warn if:
...
(a) total sector size is different from the size of ccd, or
(b) size of a partition exceeds the size of ccd.
1998-02-22 06:50:08 +00:00
9db8348725
Cosmetic change; use tab of width 8.
1998-02-22 05:14:34 +00:00
e12f85fbc1
Disable the device if we fail to open and nobody else has the device open.
...
(Thanks Charles and Marc for your advices).
1998-02-22 05:09:58 +00:00
11b3fea04a
Fix bonehead error in previous change.
1998-02-22 03:24:58 +00:00
6ad2876b5a
Similar changes to com driver:
...
Arrange to call com_break() and com_modem() at splserial().
It's simpler this way. Really.
1998-02-19 21:26:10 +00:00
84a72d6ff4
Remove stray label from last change.
1998-02-19 09:33:33 +00:00
06ec9f646f
Arrange to call com_break() and com_modem() at splserial().
...
It's simpler this way. Really.
1998-02-19 09:23:38 +00:00
b0b3787d14
Include the NFS option header.
1998-02-19 00:47:02 +00:00
a7f7004e33
include an MD header if arm32. (No header yet, but there will be
...
one eventually.)
1998-02-17 18:27:10 +00:00
4399060ec9
- Perform all necessary bus_dmamap_sync() operations.
...
- Greatly simplify allocation and DMA mapping of the mailbox and ccbs.
- Be more robust against resource shortage errors, and report errors better.
1998-02-17 03:02:30 +00:00
8354e68508
Remove "class" declarations, and add "devclass" declarations where
...
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
018aa6e97e
Don't include <dev/scsipi/scsipi_conf.h> twice.
1998-02-13 21:58:40 +00:00
d0ad49a001
Backout previous change, and rather, remove all protection but the one
...
actually currently required. Suggested by Charles M. Hannum.
1998-02-13 08:28:16 +00:00
dea45865d2
Don't include <dev/scsipi/scsi_all.h> twice.
1998-02-13 08:12:40 +00:00
ae193ba149
Move entry for IO-DATA PCLA/T out from comment. Since there may be
...
two different location for MAC address, just make bus-independent
layer to ask it.
1998-02-13 04:51:22 +00:00
ef09ae656f
Fix or add protection for mutiple inclusion.
1998-02-13 04:19:13 +00:00
0435e7ea98
Correct a bogosity in the adapter->mii attach code pointed out by cgd:
...
in pci/if_tl.c, call config_found() with a print function, instead of
printing ourself a message in if_tl.c if no miibus was found. The print
function is in mii/mii.c (mii_adapter_print()) so that it can be used by any
adapter (idea from the scsi system).
1998-02-11 19:02:11 +00:00
841fb8fd54
Don't try to dynamically create and destroy DMA maps. Instead, keep
...
it simple, and allocate one for each transmit and receive descriptor.
In addition to being simpler and faster, this fixes a serious memory leak
in the transmit path.
1998-02-11 01:28:22 +00:00
6e899bb965
Clear the scsipi_xfer's status byte before executing the command. This
...
fixes a condition where stale data can be left in the status byte, causing
user programs that interpret it to fail.
Fixes kern/4964 from Chris Jones <cjones@honors.montana.edu>.
1998-02-10 19:48:51 +00:00
d90485202c
- add defopt's for UVM, UVMHIST and PMAP_NEW.
...
- remove unnecessary UVMHIST_DECL's.
1998-02-10 14:08:44 +00:00
eda74e6121
- Perform all necessary bus_dmamap_sync() operations.
...
- Greatly simplify allocation and DMA mapping of the mailbox and ccbs.
- Be more robust against resource shortage errors, and report errors better.
1998-02-09 10:53:07 +00:00
5fe6759646
Fix serial console support, which was broken by the previous revision:
...
- In the console getc routine, block until a character becomes ready
(no, really, we mean it). This routine should _never_ time out.
- In the console putc routine, if the UART has trouble, do NOT proceed
to print a diagnostic message, which would recursively invoke the
console putc routine ad nauseum.
1998-02-09 10:22:45 +00:00
cc06ca6693
* Add the "VIPER 150/21531" to quirk list (ST_Q_SENSE_HELP).
...
* Double timeout on tape position commands to 30 minutes. Some units
seem capable of taking that much time.
1998-02-07 23:00:24 +00:00
8e8eed4ba7
Create RX DMA maps with ALLOCNOW. These maps are essentially always
...
loaded, and recovering from a resource shortage error is much harder
in the receive case.
1998-02-07 21:13:34 +00:00
f955aa86e5
Properly handle error conditions from bus_dmamap_load_mbuf().
1998-02-07 20:40:35 +00:00
ae3e754e0b
Newly generated version.
1998-02-07 20:07:37 +00:00
6d9b48ac1d
Fix typo, and commit in the right order.
1998-02-07 20:05:25 +00:00
c78e3507ba
Add the AGP device in the 82443LX.
1998-02-07 19:32:37 +00:00
208d979613
Use BUS_DMA_NOWAIT where appropriate. Don't create DMA maps with
...
BUS_DMA_ALLOCNOW.
1998-02-07 10:27:12 +00:00
f1fa872906
don't forget class spec
1998-02-07 00:49:19 +00:00
5942e0ff3d
initial implementation of OFW ISA bus code and attachments for a few
...
devices. Still a bit rough, but works well enough. Requires a bunch of
machine-dependent glue (since this is, in effect, a MI bus bridge).
1998-02-07 00:46:45 +00:00
e08a44b196
- Perform all necessary bus_dmamap_sync() operations.
...
- Greatly simplify allocation and DMA mapping of the mailbox and ccbs.
- Be more robust against resource shortage errors, and report errors better.
1998-02-06 23:06:44 +00:00
8098a443f0
A version of the de driver which does bus_dma. Note that it has not been
...
tested on any other platform other than i386. Use of bus_dma(9) can be
turned by defining TULIP_BUS_DMA_NOTX and TULIP_BUS_DMA_NORX. These allow
one to determine if the problem is in the transmit or receive path.
A problem reported by mycroft is also fixed.
1998-02-06 20:57:12 +00:00
fd01cb624f
Allow a ccd component to be on any partition type.
1998-02-06 08:13:07 +00:00
9d13bc6e0e
Restore system priority level before return from comopen().
1998-02-06 03:25:34 +00:00
0725302eac
vme_bus_probe() takes an `offset' argument.
1998-02-06 00:22:41 +00:00
40b15d9230
Add `offset' argument to probe routine.
1998-02-06 00:21:49 +00:00
1a8c7604f4
initial import of the new virtual memory system, UVM, into -current.
...
UVM was written by chuck cranor <chuck@maria.wustl.edu>, with some
minor portions derived from the old Mach code. i provided some help
getting swap and paging working, and other bug fixes/ideas. chuck
silvers <chuq@chuq.com> also provided some other fixes.
this is the rest of the MI portion changes.
this will be KNF'd shortly. :-)
1998-02-05 07:59:28 +00:00
0392bc60a1
Fix the FXP_TXDESCOFF() macro.
1998-02-05 07:31:52 +00:00
a2b24d5571
Change "__BUS_SPACE_NEED_STREAM_METHODS" to "__BUS_SPACE_HAS_STREAM_METHODS".
1998-02-04 14:13:40 +00:00
ec6c5c10d7
Add necessary bus_dmamap_sync() calls for memory mapped with the COHERENT
...
hint, per bus_dma(9).
1998-02-04 08:26:42 +00:00
8abe76d2f0
Add offset and length parameters to bus_dmamap_sync(), used for specifiying
...
partial syncs of a DMA mapping.
1998-02-04 05:12:46 +00:00
3995590109
Use `offsetof()'.
1998-02-04 01:19:23 +00:00
749d6cf61d
Account for changed vme_bus_probe() args.
...
Fix vme_ie_write24() to use bus_space_write_2() in stead of poking
directly into the bus handle.
1998-02-04 00:59:02 +00:00
62f18b7ff0
Use vme_bus_probe() callback for device detection.
...
Use correct VME modifier (A16+D32 instead of A32).
1998-02-04 00:55:52 +00:00
47afb35008
Use vme_bus_probe() callback for device detection.
1998-02-04 00:54:27 +00:00
c7a01456a0
Add a callback function to vme_bus_probe(), for device-specific probes
...
using mapped device space.
1998-02-04 00:50:44 +00:00
296d96f42c
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
...
BUS_DMA_COHERENT.
1998-02-04 00:38:50 +00:00
c1e336fc0b
Erase a spurious structure definition.
1998-02-04 00:38:34 +00:00
a7c5c1ef3c
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
...
BUS_DMA_COHERENT.
1998-02-04 00:32:55 +00:00
819d730e25
s/of_nodename/of_packagename/. Eventually, we'll probably want something
...
similar for instances.
1998-02-03 16:58:25 +00:00
77b3a5be15
Put a debugging printf inside #ifdef IYDEBUG ... #endif.
1998-02-03 16:22:01 +00:00
7052e9949b
Change the data access busification functions to
...
the "stream" busification functions.
In the architecture as the BeBox(CPU is big endian, have ISA bus),
These methods would be used where "raw" data needs to {read,write,set}
unchanged.
Add #ifndef __BUS_SPACE_NEED_STREAM_METHODS (define that on NetBSD/bebox),
if not define __BUS_SPACE_NEED_STREAM_METHODS,
define "stream" busification functions to normal busification functions.
1998-02-03 04:26:45 +00:00
9c46cdbef5
in ofbattach(), don't both doing an ofbprint() by hand if the root node.
...
The old ofbprint() wasn't particularly good (it forced the root node
to have a 'name' property, which apparently violates the OFW spec), and
the new one (though it normally prints more useful information) has
nothing useful to say about the root node. It's not clear to me that
'ofroot' should exist at all.
1998-02-03 00:43:46 +00:00
9bffcfef75
change #ifdefs keying on "alpha" to key on "__NO_SOFT_SERIAL_INTERRUPT"
...
instead, and define that on NetBSD/alpha and NetBSD/arm32.
1998-02-02 23:01:02 +00:00
c2f42b2213
Implement a flag to indicate that the driver attached correctly.
...
This is useful in the case where an attachment's probe routine
verifies that there is indeed hardware present but something goes
"wrong" in the attach causing the device to be unusable. (Without
keeping track of this, in that case incorrect ports could be
accessed or uninitted pointers could be deferenced on open or at
other times.)
1998-02-02 22:54:55 +00:00
ac4b4ec31d
make ofbprint() use of_nodename(). cleanup.
1998-02-02 22:00:07 +00:00
5169537359
add of_nodename(), a function to stuff the last component of a node's
...
name into a caller-provided buffer (helpful for generating
autoconfiguration output). Also, other minor cleanup.
1998-02-02 21:56:16 +00:00
c9249eced0
add a prototype for of_nodename(), a function to stuff the last
...
component of a node's name into a caller-provided buffer (helpful
for generating autoconfiguration output).
1998-02-02 21:55:23 +00:00
69d33afe72
Prototype OF_getproplen().
1998-02-02 21:00:13 +00:00
b01ada14d9
fix up the power management code to dtrt with the 3c562A mfc card (and
...
hopefully the other variants)
1998-02-01 23:52:25 +00:00
6b68f8b698
use an array of serial devices, not a cascaded if
...
add power management support
1998-02-01 23:50:52 +00:00
3a3ac64f4f
rewrite mfc intr management not to use unexported spl* functions
...
add mfc iobase/iosize support
add power management support
1998-02-01 23:49:02 +00:00
cdc3013464
whitespace changes for readability
1998-02-01 23:38:44 +00:00
57e56a34bc
add state to struct pcmcia_function for mfc iobase/iosize support
1998-02-01 23:38:06 +00:00
5c17882e45
move pcic_wait_ready from i82365var.h to i82365.c
1998-02-01 23:36:23 +00:00
63f5e2bbc3
move pcic_wait_ready to i82365.c
1998-02-01 23:33:51 +00:00
1d4b77e754
split com_attach_subr into attach stuff and per-open initialization stuff
...
add timeouts to all splserial() while loops so bugs elsewhere don't cause
the com driver to wedge the machine
add power management support
1998-02-01 23:33:01 +00:00
a71698f108
add power management hooks to softc
1998-02-01 23:30:49 +00:00
fa75c2d647
Fix two harmless typographical errors in a comment.
1998-02-01 19:25:44 +00:00
f3ee364e31
* Make sure the `ECB_NEXUS' flag accurately reflects the existence of
...
an initiator/target nexus and thus mark the correct queue (if any) a
command is on.
* If a disconnected command times out, just leave it on the nexus queue
and do nothing (for now). I need yet to decide on the strategy to
follow in this case. Note: we used to move the command to the `ready'
queue and then do nothing, which is worse.
1998-01-31 23:37:51 +00:00
5ba817c967
Don't hardcode the interrupt type; use what the pnp config provided to us.
1998-01-31 21:31:35 +00:00
1caaa1f520
PR/4883: Andreas Wrede: Check for wildcard mem address not io ports.
1998-01-31 11:23:35 +00:00
480445c035
When a PCI bus is attached, print out which bus spaces were enabled
...
by the parent.
1998-01-31 00:37:39 +00:00
d411251c64
Fix for the vibra16x from Lennart Augusts: saying that the dsp4.16 was
...
a SB64 was just a guess. The vibra16x is really a sb16.
1998-01-30 11:55:36 +00:00
605c219597
Add ID for the Vibra16X PnP board (aka CT4170).
1998-01-30 11:42:51 +00:00
cec1781573
Regen.
1998-01-30 02:25:28 +00:00
8b75f90a86
Add entries for the PMAZ-DS and PMAZ-FS (Flamingo Turbochannel Dual SCSI
...
baseboard devices, normal and fast), and the PMAZB-AA and PMAZC-AA
(Turbochannel Dual SCSI option cards, normal and fast).
1998-01-30 02:24:58 +00:00
6f6593a533
Fix initialization and timing problem.
...
As per misc/4902, from Clifford Wright <cliff@snipe444.org>.
1998-01-30 02:02:38 +00:00
78650a8398
Use offsetof() from libkern.h
1998-01-30 01:26:51 +00:00
a7bc6bd92c
In the NE2000 case, if we encounter an unaligned mbuf, copy it to an
...
aligned buffer so that we can do 16-bit PIO to the device without causing
an unaligned access fault.
1998-01-29 00:59:33 +00:00
99139bc35a
Fix for port-alpha/4903- always download f/w unless config flags say
...
no or we have no firmware to download.
1998-01-28 19:09:24 +00:00
9359316f6f
Add support for the 82553[AC] PHY by treating it like an 82555. From
...
Soren S. Jorvang <soren@t.dk>, PR #4840 .
1998-01-28 18:31:37 +00:00
b89119c134
Convert this driver to use the bus_dma interfaces.
1998-01-28 07:26:42 +00:00
5cafda5b3c
Update 2100 F/W to 1.10 level. Also remove some older 2100 f/w versions.
...
This version of the 1.10 f/w is initiator only (not initiator/target).
1998-01-28 06:09:02 +00:00
mycroft