Commit Graph

36 Commits

Author SHA1 Message Date
itojun 8808abb7b8 correct pointer signedness mixups. sync w/kame 2002-09-11 03:45:44 +00:00
itojun 6dedde045a correct signedness mixup in pointer passing. sync w/kame 2002-09-11 02:41:19 +00:00
itojun c00fa8dfd9 avoid swapping endian of ip_len and ip_off on mbuf, to meet with M_LEADINGSPACE
optimization made last year.  should solve PR 17867 and 10195.

IP_HDRINCL behavior of raw ip socket is kept unchanged.  we may want to
provide IP_HDRINCL variant that does not swap endian.
2002-08-14 00:23:27 +00:00
itojun b05ff066a7 whitespace cleanup 2002-06-09 14:43:10 +00:00
itojun 14dafa8f6a avoid unneeded malloc/free. sync w/kame 2002-05-29 09:05:18 +00:00
itojun f3279050b2 esp/ah_ctlinput: pass useful address to key_alloc. 2002-03-18 15:30:03 +00:00
itojun a225c3930f whitespace/costmetic sync w/kame 2001-12-21 08:54:52 +00:00
itojun df8adebac1 remove obsolete #if 0'ed section. sync w/kame 2001-12-21 07:16:58 +00:00
lukem 4f2ad95259 add RCSIDs 2001-11-13 00:56:55 +00:00
itojun 99d25b4e8a reduce diff with kame. whitespace changes only. 2001-10-15 03:55:37 +00:00
thorpej bf2dcec4f5 Remove the use of splimp() from the NetBSD kernel. splnet()
and only splnet() is allowed for the protection of data structures
used by network devices.
2001-04-13 23:29:55 +00:00
itojun 2d6047cff9 make sure to enforce inbound ipsec policy checking, for any protocols on top
of ip (check it when final header is visited).  sync with kame.
XXX kame team will need to re-check policy engine code
2001-03-01 16:31:37 +00:00
itojun bc5a6e2482 pull latest kame pcbnotify code. synchronizes ICMPv6 path mtu discovery
behavior with other protocols (i.e. validation, use of hiwat/lowat).
2001-02-11 06:49:49 +00:00
itojun 617b3fab7e - record IPsec packet history into m_aux structure.
- let ipfilter look at wire-format packet only (not the decapsulated ones),
  so that VPN setting can work with NAT/ipfilter settings.
sync with kame.

TODO: use header history for stricter inbound validation
2001-01-24 09:04:15 +00:00
itojun 5eae50d991 update icmp6 too big validation. the change is necessary since pmtud is
mandatory for IPv6 (so we can't just validate by using connected pcb - we need
to allow traffic from unconnected pcb to do pmtud).
- if the traffic is validated by xx_ctlinput, allow up to "hiwat" pmtud
  route entries.
- if the traffic was not validated by xx_ctlinput, allow up to "lowat" pmtud
  route entries (there's upper limit, so bad guys cannot blow up our routing
  table).
sync with kame

XXX need to think again about default hiwat/lowat value.
XXX victim selection to help starvation case
2000-12-09 01:29:45 +00:00
itojun 9288750911 memcpy -> bcopy, for sync with kame tree 2000-10-19 00:40:44 +00:00
itojun 23a03329ef verify ICMPv6 too big messages based on TCP pcbs, and/or IPsec SA.
TODO: udp6, and sendto consideration.  as pmtud is mandatory for IPv6,
it is rather important for us to support those cases.
TODO: more testing
TODO: kame sync
2000-10-18 21:14:12 +00:00
thorpej ea9b5a9106 Restructure the Path MTU Discovery code somewhat to avoid
entering rtentry's for hosts we're not actually communicating
with.

Do this by invoking the ctlinput for the protocol, which is
responsible for validating the ICMP message:
	* TCP -- Lookup the connection based on the address/port
	  pairs in the ICMP message.
	* AH/ESP -- Lookup the SA based on the SPI in the ICMP message.

If validation succeeds, ctlinput is responsible for calling
icmp_mtudisc().  icmp_mtudisc() then invokes callbacks registered
by protocols (such as TCP) which want to take some sort of special
action when a path's MTU changes.  For TCP, this is where we now
refresh cached routes and re-enter slow-start.

As a side-effect, this fixes the problem where TCP would not be
notified when a path's MTU changed if AH/ESP were being used.

XXX Note, this is only a fix for the IPv4 case.  For the IPv6
XXX case, we need to wait for the KAME folks.

Reviewed by sommerfeld@netbsd.org and itojun@netbsd.org.
2000-10-18 17:09:14 +00:00
itojun dcfe05e7c1 fix compilation without INET. fix confusion between ipsecstat and ipsec6stat.
sync with kame.
2000-10-02 03:55:41 +00:00
itojun e6efb27c84 add missing splx, when outgoing interface queue is full on tunnelled
ESP packet output.  KAME PR 280.
2000-08-16 09:54:39 +00:00
thorpej 831a48fd0b Make this compile without INET6 again. 2000-08-15 21:43:57 +00:00
itojun 65d37eff7f correct RFC2367 PF_KEY conformance (SADB_[AE]ALG_xx values and namespaces).
sync from kame.

WARNING: need recompilation of setkey(8) and pkgsrc/security/racoon.
(no ipsec-ready netbsd was released as official release)
2000-07-18 14:56:42 +00:00
itojun e0b65589f1 sync with more recent kame. cope with malloc failure more gracefully
some cosmetics.
2000-06-02 18:20:15 +00:00
mycroft a5edb9f747 Oops; fix thinko. 2000-03-26 19:11:04 +00:00
mycroft a08d308dc2 Update byte count and time stamps for received packets (as in ESP).
May help fix stalls.
2000-03-26 18:55:37 +00:00
itojun fadbd2b29a cleanup AH/policy processing.
- parse IPv6 header by using common function, ip6_{last,next}hdr.
- fix behaivior in multiple AH cases.
  make strict boundary checks on mbuf chasing.
(sync with latest kame)
2000-03-21 23:53:30 +00:00
itojun 2c7ba046f0 with IPv4 AH, strip off AH from the packet. this is to make some
of IPv4 transport layer code work correctly (specifically, ICMPv4
will transmit wrong packet if we don't strip AH here)

this is just for m_pulldown case.  normal installations are not affected.
2000-02-26 11:49:44 +00:00
itojun 857bdcba78 make variable initialization safer.
(IP6_EXTHDR_CHECK can call m_pullup under rare condition)
2000-02-25 00:27:18 +00:00
darrenr fd7edad6c3 Change the use of pfil hooks. There is no longer a single list of all
pfil information, instead, struct protosw now contains a structure
which caontains list heads, etc.  The per-protosw pfil struct is passed
to pfil_hook_get(), along with an in/out flag to get the head of the
relevant filter list.  This has been done for only IPv4 and IPv6, at
present, with these patches only enabling filtering for IPPROTO_IP and
IPPROTO_IPV6, although it is possible to have tcp/udp, etc, dedicated
filters now also.  The ipfilter code has been updated to only filter
IPv4 packets - next major release of ipfilter is required for ipv6.
2000-02-17 10:59:32 +00:00
itojun 90736ab608 fix include pathname for better rfc2292 compliance. 2000-02-06 12:49:37 +00:00
itojun 1a2a1e2b1f bring in latest KAME ipsec tree.
- interop issues in ipcomp is fixed
- padding type (after ESP) is configurable
- key database memory management (need more fixes)
- policy specification is revisited

XXX m->m_pkthdr.rcvif is still overloaded - hope to fix it soon
2000-01-31 14:18:52 +00:00
itojun ec63b40402 remove too much portability code in KAME, to improve readability. 2000-01-06 07:31:07 +00:00
itojun 06c350054d remove reference to in6_systm.h (file itself will be removed afterwords) 1999-07-30 10:35:34 +00:00
itojun 6ea6ccf105 checked build on alpha and i386, with GENERIC.v6.
fixed several sizeof(void *) and sizeof(size_t) issues on alpha.

Thanks to: Dave Huang and Tim Rightnour
1999-07-06 08:55:56 +00:00
thorpej cd3a345ea0 RCS ID police. 1999-07-03 21:24:45 +00:00
itojun 74d3c214ec KAME/NetBSD 1.4 SNAP kit, dated 19990628.
NOTE: this branch (kame) is used just for refernce.  this may not compile
due to multiple reasons.
1999-06-28 06:36:47 +00:00