curcpu()->ci_want_resched is now required, so get rid of the
want_resched global. Also, cpu_need_resched() now takes two arguments.
The l_next and l_back fields in struct lwp no longer exists, so delete
references to it from genassym.cf.
Also, m68k/m68k/proc_subr.s is no longer used, says mhitch, so remove its use.
This brings the atari BOOT kernel back to a buildable state.
an SR value or an IPL_* constant).
- Take advange of the smaller ipl_cookie_t to shrink kmutex_t from
16 bytes to 8 bytes by overlapping storage where possible.
- Implement a RAS-based _lock_cas() for mc68010 systems (Sun2). See
sun68k/sun68k/isr.c.
Tested on various m68k platforms, but NOT Sun2. In any case, at least
Sun2 compiles now.
and use temporary variables on register accesses
- also remove volatile from *memkva member in struct grfabs_et_priv
because it isn't used to refer memory
XXX: I'm not sure if bm->plane should be volatile or not
but I don't think previous code treats it as volatile anyway.
(though I'm not sure how compiler handled "volatile caddr_t")
int _bus_dmatag_subregion(bus_dma_tag_t tag,
bus_addr_t min_addr,
bus_addr_t max_addr,
bus_dma_tag_t *newtag,
int flags)
void _bus_dmatag_destroy(bus_dma_tag_t tag)
that allow a (normally broken/limited) device to restrict the bus address
range it can talk to. this is used by bce(4) to limit DMA addresses to
1GB range, the maximum the chip can address.
all this is from Yorick Hardy <yhardy@uj.ac.za> with input from several
people on tech-kern.
XXX: bus_dma(9) needs an update still.
debugging and its main use is in device drivers. Its used there to signal
that the flagged buffer has a special meaning or should be handled
differently.
OK'd by Bill Sudenmund on tech-kern.
by Slava Semushin <slava.semushin@gmail.com>.
To verify that no nasty side effects of duplicate includes (or their
removal) have an effect here, I've compiled an i386/ALL kernel with
and without the patch, and the only difference in the resulting .o
files was in shifted line numbers in some assert() calls.
The comparison of the .o files was based on the output of "objdump -D".
Thanks to martin@ for the input on testing.
- finish implementing splraiseipl (and makeiplcookie).
http://mail-index.NetBSD.org/tech-kern/2006/07/01/0000.html
- complete workqueue(9) and fix its ipl problem, which is reported
to cause audio skipping.
- fix netbt (at least compilation problems) for some ports.
- fix PR/33218.
version.
Add disk_blocksize(9) so that disk drivers can record the physical
block size of a disk if it is different to DEV_BSIZE. Right now this
simply initialises dk_blkshift and dk_byteshift according to the
supplied block size. This information is used in the MI version of
bounds_check_with_label().
dumpdev. this occurs when we try to set the dumpdev to a device
with no driver loaded. this fixes PR#34872.
in sys_swapctl, if bdevsw_lookup() fails, set dumpdev = NODEV
before calling cpu_dumpconf(). (this also fixes PR#34872.)
XXX: cpu_dumpconf() should probably be changed to take a dumpdev
XXX: and return an error in such cases, but that is a much more
XXX: intrusive change.
XXX2: this is only run-tested on sparc64 and compile tested on a
XXX2: couple of platforms.
Uvm changes over 17 months ago resulted in the 68040/060 segment table
page being entered with pmap_kenter(), which does not record the mapping
in the pv table. Attempting to inhibit caching of that page as required
by the 68060 hardware no longer changes the PTE and caused varying degrees
of multiple faulting, sometimes resulting in an unusable system. Apparently
very few people attempted to run a 68060 based system since that change.
Fix to to change the caching bits directly rather than using pmap_changebit().
ones and those for specific machines of developers. PR 32304.
OK'ed by rpaulo.
N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".
- use vmspace rather than proc or lwp where appropriate.
the latter is more natural to specify an address space.
(and less likely to be abused for random purposes.)
- fix a swdmover race.
- initialize it properly in the bus front-ends (all 2, exept in wdc_pcmcia.c
for the "Sandisk CompactFlash Card" where it's set to 1)
- remplace hardcoded '2' by ata_channel->ch_ndrive in MI IDE drivers.
From Christos Zoulas in kern/32501.
- rather than embedding bufq_state in driver softc,
have a pointer to the former.
- move bufq related functions from kern/subr_disk.c to kern/subr_bufq.c.
- rename method to strategy for consistency.
- move some definitions which don't need to be exposed to the rest of kernel
from sys/bufq.h to sys/bufq_impl.h.
(is it better to move it to kern/ or somewhere?)
- fix some obvious breakage in dev/qbus/ts.c. (not tested)
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.
Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.
qualification in places and renaming a few local variables.
Also adds a couple uses of __UNVOLATILE() to allow passing volatile
variables to functions wanting e.g. caddr_t.
general autoconf functions which typically take a "void*". There may
be reason to revisit this later if the signature for the autoconf
functions can be adapted, but for now this gets the code building.
where the printing of `version' is already performed.
This has the benefit of allowing the copyright to be available
via dmesg(8) on platforms which need the `msgbuf' to be setup
in cpu_startup() before printed output is remembered.
- don't use managed mappings/backing objects for wired memory allocations.
save some resources like pv_entry. also fix (most of) PR/27030.
- simplify kernel memory management API.
- simplify pmap bootstrap of some ports.
- some related cleanups.
to select the maximum segment size for each bus_dmamap_load (up to the maxsegsz
supplied to bus_dmamap_create). dm_maxsegsz is reset to the value supplied to
bus_dmamap_create when the dmamap is unloaded.
everything "scsi_*", since we really are talking about the SCSI command
set, ATAPI transport not withstanding. Improve the names of many structures,
and prepend "SCSI_" onto all SCSI command opcodes. Place items described
by the SCSI Primary Commands document into scsi_spc.h.
- they shouldn't be needed with the current fault handler.
- they causes assertion failure with the recent vm_map implementation.
discussed on tech-kern@. reviewed by Chuck Silvers.
PR/29179 from Julio M. Merino Vidal.
- Ffs internal snapshots get compiled in unconditionally.
- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.
Reviewed by: Jason Thorpe <thorpej@netbsd.org>
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.
XXX: we _need_ some way of making this more simple.
the command group ID won't necessarily work for vendor-specific commands.
- Expand the storage in the SC_REQ structure to account for 16-byte commands.
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.
- move per VP data into struct sadata_vp referenced from l->l_savp
* VP id
* lock on VP data
* LWP on VP
* recently blocked LWP on VP
* queue of LWPs woken which ran on this VP before sleep
* faultaddr
* LWP cache for upcalls
* upcall queue
- add current concurrency and requested concurrency variables
- make process exit run LWP on all VPs
- make signal delivery consider all VPs
- make timer events consider all VPs
- add sa_newsavp to allocate new sadata_vp structure
- add sa_increaseconcurrency to prepare new VP
- make sys_sa_setconcurrency request new VP or wakeup idle VP
- make sa_yield lower current concurrency
- set sa_cpu = VP id in upcalls
- maintain cached LWPs per VP
drivers that attach to it. This allows for other host interface chips
that use the same keyboards and mice, such as the ones in the ARM
IOMD20, ARM7500, and SA-1111. The PC-compatible driver is still
called pckbc(4), and the new abstraction layer is "pckbport", so the
child devices have moved from sys/dev/pckbc to sys/dev/pckbport, which
also contains some code shared between all host controllers. To avoid
incompatibility, pckbdreg.h is still installed in
/usr/include/dev/pckbc.
In theory, this shouldn't cause any behavioural changes in the drivers
concerned. Thy just use rather more function pointers than before. Tested
on i386 and (with a new host driver) acorn32. Compiled on several other
affected architectures.
process context ('reaper').
From within the exiting process context:
* deactivate pmap and free vmspace while we can still block
* introduce MD cpu_lwp_free() - this cleans all MD-specific context (such
as FPU state), and is the last potentially blocking operation;
all of cpu_wait(), and most of cpu_exit(), is now folded into cpu_lwp_free()
* process is now immediatelly marked as zombie and made available for pickup
by parent; the remaining last lwp continues the exit as fully detached
* MI (rather than MD) code bumps uvmexp.swtch, cpu_exit() is now same
for both 'process' and 'lwp' exit
uvm_lwp_exit() is modified to never block; the u-area memory is now
always just linked to the list of available u-areas. Introduce (blocking)
uvm_uarea_drain(), which is called to release the excessive u-area memory;
this is called by parent within wait4(), or by pagedaemon on memory shortage.
uvm_uarea_free() is now private function within uvm_glue.c.
MD process/lwp exit code now always calls lwp_exit2() immediatelly after
switching away from the exiting lwp.
g/c now unneeded routines and variables, including the reaper kernel thread
- wdc_xfer to ata_xfer
- channel_queue to ata_queue
and move them to <dev/ata/atavar.h> so they can be used by non-wdc ATA
controllers. Clean up the member names of these structures while at it.
virtual memory reservation and a private pool of memory pages -- by a scheme
based on memory pools.
This allows better utilization of memory because buffers can now be allocated
with a granularity finer than the system's native page size (useful for
filesystems with e.g. 1k or 2k fragment sizes). It also avoids fragmentation
of virtual to physical memory mappings (due to the former fixed virtual
address reservation) resulting in better utilization of MMU resources on some
platforms. Finally, the scheme is more flexible by allowing run-time decisions
on the amount of memory to be used for buffers.
On the other hand, the effectiveness of the LRU queue for buffer recycling
may be somewhat reduced compared to the traditional method since, due to the
nature of the pool based memory allocation, the actual least recently used
buffer may release its memory to a pool different from the one needed by a
newly allocated buffer. However, this effect will kick in only if the
system is under memory pressure.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
Remove p_raslock and rename p_lwplock p_lock (one lock is enough).
Simplify window test when adding a ras and correct test on VM_MAXUSER_ADDRESS.
Avoid unpredictable branch in i386 locore.S
(pad fields left in struct proc to avoid kernel bump)
containing signal posting, kernel-exit handling and sa_upcall processing.
XXX the pc532, sparc, sparc64 and vax ports should have their
XXX userret() code rearranged to use this.
Right now the only flag is used to indicate if a ksiginfo_t is a
result of a trap. Add a predicate macro to test for this flag.
* Add initialization macros for ksiginfo_t's.
* Add accssor macro for ksi_trap. Expands to 0 if the ksiginfo_t was
not the result of a trap. This matches the sigcontext trapcode semantics.
* In kpsendsig(), use KSI_TRAP_P() to select the lwp that gets the signal.
Inspired by Matthias Drochner's fix to kpsendsig(), but correctly handles
the case of non-trap-generated signals that have a > 0 si_code.
This patch fixes a signal delivery problem with threaded programs noted by
Matthias Drochner on tech-kern.
As discussed on tech-kern. Reviewed and OK's by Christos.
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.
Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.
Follows recent discussion on tech-kern@
* introduce fsetown(), fgetown(), fownsignal() - this sets/retrieves/signals
the owner of descriptor, according to appropriate sematics
of TIOCSPGRP/FIOSETOWN/SIOCSPGRP/TIOCGPGRP/FIOGETOWN/SIOCGPGRP ioctl; use
these routines instead of custom code where appropriate
* make every place handling TIOCSPGRP/TIOCGPGRP handle also FIOSETOWN/FIOGETOWN
properly, and remove the translation of FIO[SG]OWN to TIOC[SG]PGRP
in sys_ioctl() & sys_fcntl()
* also remove the socket-specific hack in sys_ioctl()/sys_fcntl() and
pass the ioctls down to soo_ioctl() as any other ioctl
change discussed on tech-kern@
most polling.
2) Clean up some goofiness in pciide -- get rid of the whole "candisable" path
(it's gratuitous) and simplify the code by calling pciide_map_compat_intr(),
*_set_modes() and wdc_print_modes() from central locations.
3) Add a register writability and register ghost test to eliminate phantom
drives more quickly.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
now referenced from atari_init.c and machdep.c.
The PANICBUTTON implementation appears to be incomplete, compared to
the other ports which have this option implemented.
enabled on amd64). Add a dmat64 field to various PCI attach structures,
and pass it down where needed. Implement a simple new function called
pci_dma64_available(pa) to test if 64bit DMA addresses may be used.
This returns 1 iff _PCI_HAVE_DMA64 is defined in <machine/pci_machdep.h>,
and there is more than 4G of memory.
http://mail-index.netbsd.org/source-changes/2003/05/08/0068.html
There were some side-effects that I didn't anticipate, and fixing them
is proving to be more difficult than I thought, do just eject for now.
Maybe one day we can look at this again.
Fixes PR kern/21517.
isa_dmamap_create() calls to their open/close entrypoints. This worked
with some luck, but broke on i386 when _bus_dmamap_create started
to allocate bounce buffers upfront, since memory below 16M may well
not be available when the sound devices is opened for the Nth time.
To fix this, create a new simple interface, isa_drq_alloc/isa_drq_free,
wrappers around already existing bitmask macros. These are expected
to be used before an isa_dmamap_create call, and after an
isa_dmamap_destroy call, respectively. For the sb and ad1848 drivers,
they're deferred until open/close.
All isa_dmamap_create calls can now use BUS_DMA_ALLOCNOW and be done
at attach time.
space is advertised to UVM by making virtual_avail and virtual_end
first-class exported variables by UVM. Machine-dependent code is
responsible for initializing them before main() is called. Anything
that steals KVA must adjust these variables accordingly.
This reduces the number of instances of this info from 3 to 1, and
simplifies the pmap(9) interface by removing the pmap_virtual_space()
function call, and removing two arguments from pmap_steal_memory().
This also eliminates some kludges such as having to burn kernel_map
entries on space used by the kernel and stolen KVA.
This also eliminates use of VM_{MIN,MAX}_KERNEL_ADDRESS from MI code,
this giving MD code greater flexibility over the bounds of the managed
kernel virtual address space if a given port's specific platforms can
vary in this regard (this is especially true of the evb* ports).
cd ${KERNSRCDIR}/${KERNARCHDIR}/compile && ${PRINTOBJDIR}
This is far simpler than the previous system, and more robust with
objdirs built via BSDOBJDIR.
The previous method of finding KERNOBJDIR when using BSDOBJDIR by
referencing _SRC_TOP_OBJ_ from another directory was extremely
fragile due to the depth first tree walk by <bsd.subdir.mk>, and
the caching of _SRC_TOP_OBJ_ (with MAKEOVERRIDES) which would be
empty on the *first* pass to create fresh objdirs.
This change requires adding sys/arch/*/compile/Makefile to create
the objdir in that directory, and descending into arch/*/compile
from arch/*/Makefile. Remove the now-unnecessary .keep_me files
whilst here.
Per lengthy discussion with Andrew Brown.
- The pcibus is now called 'pcib' and the isabus 'isab'. Their attributes are
'pcibus' and 'isabus' respectively. This makes the underlying busses
attach again.
- Initialize the parent structure in the config_console() function.
Otherwise we end up without a console.
- disk_unbusy() gets a new parameter to tell the IO direction.
- struct disk_sysctl gets 4 new members for read/write bytes/transfers.
when processing hw.diskstats, add the read&write bytes/transfers for
the old combined stats to attempt to keep backwards compatibility.
unfortunately, due to multiple bugs, this will cause new kernels and old
vmstat/iostat/systat programs to fail. however, the next time this is
change it will not fail again.
this is just the kernel portion.
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
clean up some other stuff along the way, including:
- use m68k/cacheops.*, remove duplicates from cpu.h.
- centralize a few declarations in (all the copies of) cpu.h.
- define M68K_VAC on platforms which have a VAC.
- switch the sun platforms to the (now common) proc_trampoline().
- do the phys_map thang on the sun platforms too, no reason not to.
now carries the name of the attachment (e.g. "tlp_pci" or "audio"),
and cfattach structures are registered at boot time on a per-driver
basis. The cfdriver and cfattach pointers are cached in the device
structure when attached.
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
counters. These counters do not exist on all CPUs, but where they
do exist, can be used for counting events such as dcache misses that
would otherwise be difficult or impossible to instrument by code
inspection or hardware simulation.
pmc(9) is meant to be a general interface. Initially, the Intel XScale
counters are the only ones supported.
be properly used by any misc. cloning device. While here, correct
a comment to indicate that "open" is the only entry point and that
everything else is handled with fileops.
- Switch all m68k-based ports over to __HAVE_SYSCALL_INTERN.
- Add systrace glue.
- Define struct mdproc in <m68k/proc.h> instead of <machine/proc.h>.
(They were all defined exactly the same anyway, other than a couple
of the MDP_* flags.)
that made the wd-driver fall over on kernels compiled with the latest
assembler. The macro;s now use the single_inst_*() functions so there
are less places to go wrong here next time...
into kernel_object where this was missing.
This is a no-op on ports where VM_MIN_KERNEL_ADDRESS==0, ie all but
cesfic.
Confirmed and corrected by Chuck Silvers.
to use a pc-relative jump. Which is definitely not what is needed in the
relocation code!
This is new in the current assembler apparantly. None of the kernels build
after my latest upgrade were able to boot... What else is lurking!
NULL for root PCI busses. For busses behind a bridge, it points to
a persistent copy of the bridge's pcitag_t. This can be very useful
for machine-dependent PCI bus enumeration code.
* Implement a machine-dependent pci_enumerate_bus() for sparc64 which
uses OFW device nodes to enumerate the bus. When a PCI bus that is
behind a bridge is attached, pci_attach_hook() allocates a new PCI
chipset tag for the new bus and sets it's "curnode" to the OFW node
of the bridge. This is used as a starting point when enumerating
that bus. Root busses get the OFW node of the host bridge (psycho).
* Garbage-collect "ofpci" and "ofppb" from the sparc64 port.
should fix read-only source builds.
XXX Perhaps the condition should be changed to
XXX .if make(depend) || make(all) || make(dependall)
XXX similarily to bsd.kmod.mk?
make -V FILES
from being useful (and given that every other variable can be
extracted using make -V, the behaviour was unusually inconsistent
given that the original reason for clearing it doesn't seem to be
relevant anymore)
- use <bsd.prog.mk> instead of directly including <bsd.files.mk>
(and possibly <bsd.man.mk> or <bsd.own.mk>)
- remove obsolete NOPROG
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.
on the host system and never installed.
Install the generated keymaps using <bsd.files.mk> rather than by hand, so
that all the UNPRIVED magic can work.
indicating an unhandled "command". ERESTART is -1, which can lead to
confusion. ERESTART has been moved to -3 and EPASSTHROUGH has been
placed at -4. No ioctl code should now return -1 anywhere. The
ioctl() system call is now properly restartable.
become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now
are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing
and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel
access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e.
for answering machines).
Be consistant in the way that MSIZE, MCLSHIFT, MCLBYTES and NMBCLUSTERS
are defined.
Remove old VM constants from cesfic port.
Bump MSIZE to 256 on mipsco (the only one that wasn't already 256).
add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines
While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.
Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.
configuration of devices logically attached to the ISA bus:
* Change the isa_attach_args to have arrays of io, mem, irq, drq
resources.
* Add a "pnpnames" and a linked list of "pnpcompatnames" to the
isa_attach_args. If either of these members are non-NULL,
direct configuration of the bus is being performed. Add an
ISA_DIRECT_CONFIG() macro to test for this.
* Drivers are not allowed to modify the isa_attach_args unless
direct configuration is not being performed and the probe fucntion
is returning success.
* Adapt device drivers -- currently, all driver probe routines return
"no match" if ISA_DIRECT_CONFIG() evaluates to true.
one, so that we don't mess up the global count of wired pages by having
the page's wire_count be non-zero when we free the page.
pointed out by Michael Hitch.
Any problems reported by testers have been fixed, and massive
cross-compiling of kernels has shown that any problems that remain
with actually building kernels are not related to this.
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups
uvm_fault_wire(). this allows us to make pt_map non-pageable,
but we need to be careful in pmap_remove() not to attempt to
reference PTEs after the PTP has been freed.
the etc Makefile override that by putting USETOOLS into $.MAKEOVERRIDES
This way the default for kernel compiles is still to use the installed
toolchain instead of depending on $TOOLDIR. $TOOLDIR can be used by
simply adding USETOOLS=yes to the command line as usual.
Adjust each ports template to set the default no setting and also pull in
bsd.own.mk if they weren't already to ensure they'll build correctly
with the new toolchain setup.
- Install boot.atari in both / and /usr/mdec. It looks good to have a
spare copy soemwhere...
- Add '/boot.ata' as a last resort bootname.
All per discussion with Simon Burge, Matthew Green and Soren S. Jorvang.
isaki