7e916bb8a9
Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
...
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.
2012-08-16 13:31:24 +00:00
a1f0720d45
Add raid0 to init), in case we have /tmp on mfs.
2012-06-21 19:22:07 +00:00
f11ca724cb
Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
...
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.
2011-09-06 14:40:10 +00:00
8e8cb185c4
Also create device nodes for wd2 and wd3. Up to 4 disks in a NAS system are
...
not unusual.
2011-06-08 18:37:23 +00:00
f376dd1d49
Added missing devices: usb, sysmon, altq
2011-03-20 12:40:58 +00:00
1b9ef66f08
Revert the major number for satmgr(4) back to 100 and allocate it from
...
majors.powerpc, as suggested by matt@.
2011-03-01 09:17:06 +00:00
a1b66a73cd
Changed satmgr(4) device major number from 100 to 144, which is reserved
...
for local/vendor use according to src/sys/conf/majors. This prevents
problems when the shared PowerPC device majors list gets another entry.
2011-02-26 09:52:16 +00:00
15666f2d4c
Adapted for NAS systems. Use vt100 with 115200bps instead of Pc3 console.
2010-06-13 15:30:37 +00:00
39b0fd3abd
The sandpoint port is now focussed on 824x based NAS boxes.
...
Replaced GENERIC by GENERIC.NAS.
Added INSTALL_KURO for KuroBox.
GENERIC.NAS and RAMDISK are no longer needed.
2010-06-09 17:34:32 +00:00
d0e01c74e7
Make /dev/satmgr (Sandpoint-MPC824x specific) and /dev/power devices.
2010-05-30 10:17:33 +00:00
56fbd52613
Make sure tty00 and tty01 are linked to com(4).
...
The default for the unified PPC devices was to set a hard link to ttyZ*,
which uses the zstty(4) driver (not used on any Sandpoint board so far).
2010-05-26 16:58:13 +00:00
b2b23a924e
Excluded KUROBOX from GENERIC.NAS because console is on a different port.
...
Add INET6 option to GENERIC(.NAS).
Build KUROBOX kernel together with GENERIC and GENERIC.NAS.
Patch submitted by Toru Nishimura.
2010-05-17 22:52:17 +00:00
43f486267a
- add GENERIC.NAS to a standard sandpoint distribution.
2009-08-24 14:17:05 +00:00
3388ad407f
Add a constty entry, marked 'off', with otherwise the same settings
...
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion
2008-10-07 10:00:00 +00:00
d6a9de7378
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
...
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.
Should close PR port-sgimips/38962.
2008-09-13 11:46:18 +00:00
f45e56dfd5
- more arrangement to have minimal devices for init) and ramdisk) cases.
...
- make sure to have four tty[00-03] and assign 115200bps for the first.
2007-12-11 05:05:16 +00:00
3f59c64134
- add minimalist init) clause for the case of empty /dev directory.
...
- since no floppy drive is useful even with standard SP3 and EnCorePP1
configuration, floppy related descriptions will be removed in future.
installation procedure needs to have renovations.
2007-10-25 13:32:16 +00:00
2839aa3fd4
dismiss GENERIC.X2 kernel to build as the conf file has gone.
2007-10-22 06:46:14 +00:00
de89ac5321
Add a comment reminding to update the release notes if the list of
...
kernels change.
2007-07-24 10:49:23 +00:00
6a5bb11672
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
...
those platforms that actually have the driver.
See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html
Fixes PR 26511 properly.
OK'd by wrstuden@
2007-01-15 23:35:11 +00:00
0553899e97
remove ad-hok list of pty's from port tty files, and auto-generate it so
...
that it is consistent, and in the proper order.
2004-06-20 21:30:26 +00:00
1b00681156
switch over to unified MAKEDEV
2003-10-24 20:12:04 +00:00
7a46124ea4
determine the platform number of disk partitions by looking
...
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf
change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly
2003-10-19 19:07:26 +00:00
808373beb6
use target 'wscons' to create wscons-related devices; this creates
...
also some additional control devices besides the terminal devices, which
are needed for full operation
2003-10-19 17:29:08 +00:00
7126da0813
MD part of unified MAKEDEV
...
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl
2003-10-15 19:13:32 +00:00
2d42eb283b
reassing majors for crypto and pf to use the newly defined MI major range
2003-10-10 22:47:10 +00:00
5c2824bce4
Revert 'console' back to /dev/console (from /dev/constty)
2003-10-04 07:41:11 +00:00
e5217087d8
Change 'console' login to use /dev/constty so that its output isn't
...
stolen by code that requests system messages using TIOCCONS.
2003-10-03 14:54:20 +00:00
fca3294820
Add a /dev/constty == /dev/console but with minor 1.
...
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.
2003-10-03 14:35:36 +00:00
12cd483962
add isdn telephony dialout devices
2003-09-19 11:11:37 +00:00
818622e67a
Change the way pseudo tty devices are generated in order to avoid
...
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)
2003-08-30 11:00:20 +00:00
4440262659
create /dev/crypto
2003-08-22 05:06:22 +00:00
3f14c71f75
reserve cdev major # for PF. ok'ed by technical-exec
2003-07-27 14:17:57 +00:00
ce0bf5c28d
Add ksyms to "std" devices.
2003-04-27 13:15:28 +00:00
750b5b8327
Add an 'init' target, that creates the device nodes in the case where
...
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.
2003-04-17 18:03:10 +00:00
2f1f870fa8
make ipl consistently "IP Filter"
2003-03-31 03:58:55 +00:00
8dab8f4d58
Miscellaneous fixes from Igor Sobrado, in PRs 20943-20959.
2003-03-30 17:41:51 +00:00
67705b22ff
use single minimal default disktab file for most archs, replacing
...
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries
the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them
2002-12-19 20:03:46 +00:00
fe5f6ce974
- add snap_post, which makes "clean depend all release" in ../distrib/
...
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate
2002-12-02 13:18:03 +00:00
e51f1ff7d3
don't bother creating /dev/io on archs which don't support it
2002-10-23 22:56:29 +00:00
bc22c3f4d9
whitespace consistency cleanup
2002-10-21 04:14:47 +00:00
f31269d0d9
Include cgd on the list of things to be mknod(8)ed on all arches.
2002-10-04 18:53:22 +00:00
fa4442cae4
- in local), only run $0.local if it is an existing file
...
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)
2002-08-09 02:39:15 +00:00
b097765198
Update comment on how to regenerate MAKEDEV(8) after changing the
...
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.
2002-06-18 13:40:14 +00:00
4bef4356c3
Add device creation support for systrace.
2002-06-17 16:21:03 +00:00
52c64de3c7
Make GENERIC.X2 as well as GENERIC, and include the srec versions.
2002-05-16 19:29:36 +00:00
074863cac2
Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
...
or very similar configs removed.
2002-05-04 19:43:57 +00:00
2d1f93d643
- consistency cleanup
...
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform
2002-05-02 15:09:40 +00:00
1f28a82ce5
Remove /dev/pms0 creation from ports that do not have the driver;
...
obsolete it on the ones that had it in the 'all' target.
2002-04-18 13:24:56 +00:00
24e6b2b0cf
Remove devices from 'all' that we can't make.
2002-04-12 03:25:00 +00:00
abs