10eccb55ca
cmpci requires mulaw dependency.
2000-06-25 23:34:27 +00:00
fda426af2c
Defopt TLP_MATCH_*
2000-06-25 18:49:22 +00:00
3628d5523b
printf argument was in wrong position. Noted by Roger Hardiman
...
<roger@cs.strath.ac.uk>. (This code was ifdef'd out by default.)
2000-06-25 17:47:39 +00:00
79dffec702
Get PCI HME working.
2000-06-25 01:05:16 +00:00
1e343745fc
regen
2000-06-24 12:16:55 +00:00
103a704990
add Intel 82801BA devices
2000-06-24 12:16:21 +00:00
f82e306928
Add a clearing-house pseudo-device for system monitoring devices
...
such as the LM78 and VT82C686A (and eventually ACPI). Multiple
sensor devices can be hooked registered with `sysmon', and eventually
sysmon will also handle hardware (and software) watchdog timers.
Convert the `lm' and `viaenv' drivers to the new interface.
2000-06-24 00:37:19 +00:00
bc83dce0c6
Regen.
2000-06-21 09:16:16 +00:00
0273966f04
Add CMD PCI0649 product ID.
2000-06-21 08:58:57 +00:00
eee18e1f6c
beat back the undead: __BROKEN_INDIRECT_CONFIG had risen, and was
...
terrorizing innocent hackers...
2000-06-16 23:41:33 +00:00
0011842ea8
Regen.
2000-06-16 08:13:50 +00:00
567c710f2b
Add some S3 chips.
2000-06-16 08:13:25 +00:00
17de155949
Make sure we use firmware->host communication channel in cz_intr(), from
...
Bill Studenmund.
2000-06-14 17:54:33 +00:00
c521ba58c1
yet another change for NEC RISCstation 2250 of arc port.
2000-06-14 00:34:33 +00:00
3e3d2d7344
Regen.
2000-06-13 22:44:51 +00:00
d643d25eb9
Add CMD PCI0648.
2000-06-13 22:44:19 +00:00
3553879fc2
Use my proper name.
2000-06-13 13:36:42 +00:00
31c0cc5f46
Regen.
2000-06-12 22:33:41 +00:00
72d31d8d37
Add AMD 79c978 PCnet-PCI Home.
2000-06-12 22:33:06 +00:00
26bbb4f200
Regen.
2000-06-12 21:25:20 +00:00
034590578d
Shorter description for the HPT366
2000-06-12 21:25:01 +00:00
b21bc1b5b6
- add a pciide_irqack() callback, which clears the IDE DMA status bit once
...
the IRQ has been cleared on the drive.
- use pa->pa_class instead of re-reading PCI_CLASS_REG when possible
- Add support for Highpoint HPT366 and HPT370 (370 untested), based
on patches from Roger Brooks <R.S.Brooks@liverpool.ac.uk> posted on
current-users Mach, 15. Given how Highpoint docs have been wrong for the
366, the 370 is likely to not work.
Thanks to Chris Cappuccio <chris@dqc.org> for sending me the Highpoint
docs, and to Total Archive (http://www.totalarchive.com/ ) for sending
me hardware.
2000-06-12 21:20:51 +00:00
8642ac97bf
Regen.
2000-06-12 21:12:59 +00:00
1970e14b93
Add HPT366/370 device ID.
...
XXX Is 'TRIONES' the rigth vendor name ?
2000-06-12 21:12:30 +00:00
eb21ed4746
Adapt to going back to decemal device numbering.
2000-06-09 18:00:45 +00:00
8d04cd3f90
Rather than assinging 64 tty's per pci card, assign tty's as found.
...
Cyclades says driver should work with up to 128 tty's per pci card
even though they only support 64 now. Also matches FreeBSD behavior.
Print located tty's using new tty naming scheme - ttyCZ?? where ?? are
two hex letters.
Make firmware load on macppc - one le32toh() was missing.
2000-06-09 16:53:23 +00:00
8ac7bdd00c
changes for NEC RISCstation 2250 of arc port.
2000-06-09 04:48:12 +00:00
77625cf7ec
long long constant needs "LL" suffix.
2000-06-09 04:45:53 +00:00
b8f4f2be87
Regen.
2000-06-09 00:21:08 +00:00
def28a5cd2
Add some PCI devices found in the IOpener (commited from the IOpener itself :).
2000-06-09 00:20:18 +00:00
6dd21e55a9
Make attach messages consistent with PCI drivers. Make function pointer
...
usage consistent with other drivers.
2000-06-08 22:15:52 +00:00
b6a821f042
Change IPL when bridge's interrupt handler calls child device's
...
interrupt handler (This solution is not very good).
2000-06-08 10:28:28 +00:00
295ed77595
The OPTi controller supports a 32-bit dataport after all.
...
Also detect when the chip is sitting on a 25MHz PCIbus and
set the timing registers accordingly.
2000-06-07 20:42:52 +00:00
887d4555cd
Regen.
2000-06-07 19:53:17 +00:00
4837200a8c
Add vendor/device ID for 3ware Escalade IDE RAID controller.
2000-06-07 19:52:07 +00:00
a67130a218
regen.
2000-06-07 09:55:22 +00:00
09b843b7f6
fix a couple of the sun entries.
2000-06-07 09:52:16 +00:00
dca97557cd
Add CB_BCR_RESET_ENABLE in bridge control resister's bit definition.
2000-06-07 09:02:46 +00:00
b15bbb90f9
Add missing break;
2000-06-07 04:31:49 +00:00
13ed0863f8
Regen.
2000-06-07 01:58:17 +00:00
e2c1012576
Add Trident 9397DVD.
2000-06-07 01:57:30 +00:00
c85d6d7ca3
Improve the Cypress name a little.
2000-06-06 22:56:06 +00:00
a452638f06
In pciide_mapreg_dma(), check to see what type the BAR is before
...
mapping the registers, as suggested by a comment in that function.
2000-06-06 22:47:22 +00:00
ba5df2479b
Shorten names of VIA controllers to fit in 80 columns with versions.
2000-06-06 17:48:12 +00:00
c40fa3c4d4
Actually program the DMA mode of the drives into the Cypress
...
controller. Fixes a long-standing problem where IDE DMA wasn't
working on the AlphaPC 164SX.
2000-06-06 17:34:22 +00:00
05d7f969b9
Regen.
2000-06-06 07:55:50 +00:00
aed5858e8b
Add the product ID for the ESS Maestro 3 modem function as well.
2000-06-06 07:55:17 +00:00
21d9669e4f
Common routines for read/writing Cypress 82c693 control registers. Needed
...
by `pciide' and the Alpha `sio' (PCI-ISA bridge) driver.
2000-06-06 03:07:39 +00:00
8c4d1bf1f9
Adapt MI ncr53c9x changes.
2000-06-05 15:08:00 +00:00
ca3d9c7fa7
Regen.
2000-06-05 11:34:07 +00:00
gmcgarry