a HAVE_GCC28 check-variable that can now be used to add other gcc-2.8
flags in cases where they may be useful, or to remove gcc 2.7.2 "bug
workaround" flags.)
certain 17" monitors. Change from Michael R. Zucca, PR 4988.
XXX - This can cause problems on system with the DAFB chip which currently
use only a NuBus-based video adapter. In particular, grf devices may not be
attached properly in this case. This unfortunate situation is less annoying
than not having a reasonable console, however. A reasonable, reliable
monitor sense algorithm for the DAFB would resolve the problem.
--
When allocating bus space in bus_space_alloc(), use EX_FAST to find
the first fit in the map. The previous behavior violated the principle
of least surprise (especially annoying when you're debugging space allocation
problems). Suggested by Chris Demetriou.
(which was removed from that port not long after), as it's not
an especially meaningful test.
Also, bump the number of swap buffers allocated to 3/4 the amount
of file i/o buffers (taken from the Amiga port).
Rather than waiting indefinitely for a mouse or extended keyboard to
respond -- which may not even exist -- time out after 2 seconds and
continue. This corrects a very common problem with the MRG-based ADB
driver that has bitten many people running 1.3.
as this breaks C++ code that happens to indirectly include this header.
Both Matthias Scheler and I noticed this, independently.
This problem notably does not affect the atari and sun3/sun3x ports,
which have already implemented a similar solution.
the (in)famous MADHATTER patch. The only one that has been
tested is the Q700, however, so the rest are conditionalized
on the MADHATTER option until they can be verified.
was converted to use Mach VM for Net2/4.4BSD. The user segment table
pointer was originally stored in the PCB. When Mach VM came along,
however, it was also stored in the pmap, and loaded into the PCB in
pmap_activate(). pmap_activate() would then note that the PCB's USTP
was now in sync with the pmap's USTP, and the low-level context switch
code would use the value from the PCB.
However, pmap_activate() would also load the hardware MMU context if
the pmap was the current pmap (or, in the case where pmaps can be shared,
such as in NetBSD, if the proc was the current proc). The low-level
context switch code would then reload the hardware _again_ using the
USTP from the PCB.
However, the optimization of not calling pmap_activate() if "stchanged"
was false ended up causing some processes to use stale USTP values from
the PCB when the low-level context switch code reloaded the hardware!
This was noticed by using a real vfork(2) (which worked for some time
before failing, surprisingly!)
Since I'm hard pressed to find any real optimization here (since the
hardware was always reloaded once, sometimes twice!), the code now always
calls pmap_activate(), which uses the correct USTP value (the one in the
pmap). The PCB's USTP is now ignored, and should eventually be g/c'd.
Another optimization can actually be performed, and I have added a comment
describing what it is, but have not yet implemented it.
Also note that most of the loadustp() functions where actually incomplete.
This has been corrected. These functions should probably be split up into
MMU-specific operations, and called indirectly, rather than doing constant
run-time decision making based on values that will never change during the
course of a boot's lifetime.
it in initializing during autoconfig. Similar to sys/arch/sun3/dev/zs.c
revision 1.47. Ought to fix hangs at first tty access reported by
Johnny Lam, <jlbg+@andrew.cmu.edu>.
causes the MI interrupt handler to barf when we get a 5380 RST interrupt
while probing. Worse, the VIA latches the interrupt, so simply having
all interrupts disabled during autoconfig doesn't resolve the problem.
[I demonstrated the latter on a IIci, which erroneously reports a
reselection attempt(!) after autoconfig is complete. The latched
interrupt results from the SCSI bus reset we do when initializing the
bus.]
Since interrupts must be enabled during autoconfig anyway (sigh), test
to see if autoconfig has completed in sbc_irq_intr(). If not, we don't
pass the interrupt up to the MI interrupt handler. Also, make sure to
clear the VIA interrupt if we're servicing an unclaimed 5380 RST
interrupt.
Thanks to Bill Studenmund for providing the key insight needed to unlock
this problem.
interrupt properly on a SuperMac Spectrum/8 Series III, and thanks
to Dan McMahill for loaning the card to Paul.
I modified Paul's patch somewhat to change grfmv_intr_generic_{1,4}
to grfmv_intr_generic_write{1,4} and added grfmv_intr_generic_or4 to
handle this card.
deal with cheap CD-ROMs and other devices that do not appear to have
any way to enable parity generation. In the future, it might be nice
to have this configurable on a per-device basis with back-to-back
parity errors automatically disabling parity for the device. That
would require some MI changes.
* Handle unaligned and odd-length transfers.
This could probably be handled better in the future.
but is a marked improvement. This takes advantage of a pseudo-DMA hardware
hack of Apple's that exposes a 16-bit register that the Apple-designed
memory controller acts like a DMA controller and handshakes into or out
of the FIFO. Wierd.
Unfortunately, there does not seem to be a good way to determine what
variety of comm-slot card is present in a machine. There is still an
interrupt issue preventing these cards from working--hopefully that will
be ironed out shortly.
normal rei course. If the handler returns non-zero, just rte.
This should allow better MACE response-time and still keep serial
interrupt overhead to a minimum on older, slower machines.
internal ethernet on the Quadra/Centris 660av/840av.
Add initial support for the PSC (DMA controller) to support the above
(DMA SCSI remains unsupported). This involved also changing the way
that several interrupts are handled.
Above from David Huang <khym@bga.com>
Since the interrupts changed somewhat, we must also make the ipls
dynamic, defaulting to their prior levels and adjusted for the AVs.
I modelled this on the hp300.
pseudo-device rnd # /dev/random and in-kernel generator
in config files.
o Add declaration to all architectures.
o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
that this code is derived in part from Ted Tyso's linux code.
(mrz5149@cs.rit.edu) for the addresses and hints as to how the interrupts
might be disabled, and thanks to Henry Hotz (h.b.hotz@jpl.nasa.gov) for
testing on the 840AV.
Unmap the DAFB regs on the other Quadras after attachment. They're not
used.
really be dependent on DEBUG, not DIAGNOSTIC. While we're here, add
a couple of DEBUG messages to mac68k_calibrate_delay(), and wrap them
all appropriately so that the messages aren't enabled unless we
specifically ask for them (by setting clock_debug).
Define a constant for the SuperMac Spectrum/24 series III display card.
Thanks go to Luca Falzoni <falzoni@jetai.unipv.it> for trying out the
code for the Dayna ethernet support.
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
scottr