dbe99782bc
Clarify that option values are C constants.
2006-01-26 10:02:48 +00:00
f988f07e7e
add "show mbuf" command.
2006-01-24 13:03:33 +00:00
e5337b60a4
Drop trailing whitespace.
2006-01-21 23:40:30 +00:00
b6af89382a
Remove superfluous .El. From Nicolas Joly in PR 32546.
2006-01-20 21:57:35 +00:00
34d6efd9aa
Add missing .El. From Nicolas Joly in PR 32546.
...
While here, fix some macro usage.
2006-01-20 21:57:25 +00:00
b5b426b4a5
Bump date to welcome back # operator.
2006-01-19 00:19:13 +00:00
74fe467153
Widen "Value" column in the reboot desccription to accomodate RB_POWERDOWN.
...
Make the table aligned properly in PostScript output.
2006-01-19 00:12:21 +00:00
9457018f06
Reinstate description of # operator lost in an editing accident.
...
While here, fix spacing in the description of possible identifier syntax.
2006-01-19 00:00:27 +00:00
faac4d565d
The tb(4) driver is gone, so should be the manual page.
2006-01-17 19:08:28 +00:00
dd0ea511f5
New sentence, new line.
2006-01-12 21:15:59 +00:00
cd1c32c0fe
New sentence, new line.
2006-01-12 21:05:18 +00:00
ee37aa1e22
Remove duplicate Pp.
2006-01-12 20:33:39 +00:00
cab84271f9
Fix Dd argument.
2006-01-12 20:32:23 +00:00
be32f9b107
\-1, not -1 (correct PS output).
2006-01-12 19:52:13 +00:00
b74b4e4680
Sort.
2006-01-12 19:47:52 +00:00
9354759345
New sentence, new line. Use Bq instead of [].
2006-01-12 19:47:18 +00:00
d0a6ccb0ad
Sync with code: addresses have the local bit set now. Pointed out by is@.
2006-01-09 20:38:31 +00:00
b5702c305e
Add missing "phy ?". bump date
2006-01-05 12:32:27 +00:00
03d873e86e
Note that gpio can attach to elansc, and xref elansc(4). Bump date.
2006-01-05 10:46:21 +00:00
c013fe0570
Mention rlphy(4)
2006-01-04 22:00:50 +00:00
d064eae373
Add rlphy(4) (Realtek 8139/8201L PHY) from OpenBSD.
2006-01-04 21:52:17 +00:00
a2cdb58340
Mention that some IBM Etherjet cards are X3201-3's.
2006-01-03 02:15:15 +00:00
a8a473f44e
As noted in sys/dev/pci/cs4280.c, the cs461x chips are not fully supported
...
and the wss(4) or sb(4) drivers should be used instead. The man page
previously implied full support.
2006-01-03 01:59:25 +00:00
71b162b8f8
I believe that the VME bus is optional, but a GIO bus is always found.
2006-01-03 01:41:54 +00:00
c1a87362c3
Note that not all gio bus devices require the use of the HPC. Also, mention
...
existence in the 4D/3x series and the three GIO bus types.
2006-01-03 01:35:52 +00:00
b7eab49e74
Fix several typos and improve english.
2006-01-03 01:22:51 +00:00
ef94d87056
Fix a small typo and tweak wording slightly.
2006-01-02 16:45:44 +00:00
c9f2b0fc40
AMD PowerNow K7 driver written by Martin Vegiard via PR port-i386/26239.
...
Enabled by default on GENERIC and GENERIC_LAPTOP.
Imported 1 year later... but it's here finally.
2005-12-31 17:55:55 +00:00
fd18408b9a
u_intN_t -> uintN_t
2005-12-26 19:40:14 +00:00
188e99a1b6
Remove ppi* at ppbus?.
2005-12-25 18:39:36 +00:00
1864f3b314
- Add a new section, "Security Options"
...
- Move INSECURE to be under it, and fix wording - we hardwire to -1, not 0.
- Add Veriexec options.
2005-12-20 18:15:30 +00:00
fc9c16cb33
Mention COMPAT_LINUX is available for x86_64. Bump date.
2005-12-15 20:52:20 +00:00
bcc8ea407a
Remove BIOC[GS]RSIG and fix BIOC[GS]HDRCMPLT typo.
2005-12-14 22:50:07 +00:00
51f1d9a81b
Man page for the new laptop driver.
2005-12-13 18:20:56 +00:00
4da531101e
Bump date for previous.
2005-12-12 22:47:36 +00:00
34c28a6af4
Bump date for more hardware, remove extra whitespace.
2005-12-12 22:46:49 +00:00
a9505be892
Add and document a "query" keyword to veriexecctl. Usage:
...
/sbin/veriexecctl query /path/to/file
will print out filename, device, inode, evaluation status, entry flags,
fingerprint, and fingerprinting algorithm.
2005-12-12 21:47:58 +00:00
398ad9e78a
Correct manual section in cross-reference to if_nametoindex.
2005-12-12 07:22:17 +00:00
a012374f4d
Document alternative calling convention for IP_MULTICAST_IF.
2005-12-12 07:20:38 +00:00
7871d4095b
Add pcidevs entries and support to amr(4) for newer LSI MegaRAID devices,
...
including the LSI MegaRAID SCSI 320-0x, 320-2x, 320-4x, 320-1E, 320-2E,
the LSI MegaRAID SATA 300-6x and 300-8x.
Tested on an LSI MegaRAID SATA 300-8x, which confirms private advice
that after PCI-IDs to our amr(4) driver, the newer LSI MegaRAID cards
will Just Work
The Linux megaraid2 driver accepts various Intel cards with the same
pci-device IDs as the LSI MegaRAID cards, treating them exaclty as the
above-listed LSI cards. Rework our amr(4) driver to also match and
attach those device-ID if seen with an Intel vendor-ID. Add the
Intel-vendor PCI decice-ids to pcidevs, so that PCI_VERBOSE will
correctly identify the Intel cards.
Update src/share/man/man4/amr.4 to list the newly-supported cards.
(NB: I don't have the LSI SCSI or any Intel cards to test, just the
LSI SATA, which works fine for me.)
2005-12-11 19:34:47 +00:00
f39afe3e47
Add and document a VERIEXEC_DELETE operation for Veriexec.
...
We can now delete an entry from the tables using
veriexecctl delete /path/to/file
or remove an entire table using
veriexecctl delete /mount_point
(any directory will work for the mount point it's on)
2005-12-10 02:10:00 +00:00
c91f73110a
options VNODE_OP_NOINLINE is gone.
2005-12-07 12:46:32 +00:00
e8946f3801
Mention options FFS_NO_SNAPSHOT. Maybe incomplete, but better than nothing...
2005-12-07 12:08:37 +00:00
0d0e7c8ea3
Mention TerraTec TValue cards. Bump date. Copyright maintenance.
2005-12-06 23:45:48 +00:00
9b410b0b20
Use more displays (.Bd) instead of lots of line breaks (.Pp).
2005-12-06 22:06:27 +00:00
519298998f
Mark up functions with .Fn.
2005-12-06 21:58:49 +00:00
64d99d06ac
First part of cleanup:
...
. replace .br (roff) with .Pp (mdoc)
. remove dot and end of some enumerations (SEE ALSO, AUTHORS)
. use standard headers
. fix tcpdump xref
. fix a typo (KENEL)
. mark up paths with .Pa, not .Ic.
2005-12-06 21:57:09 +00:00
b3826d01bf
Drop trailing whitespace.
2005-12-06 21:39:13 +00:00
1eabf25320
Bump date for previous.
2005-12-06 17:23:21 +00:00
34a6e05323
update to the man page for the new driver from David Boggs
2005-12-06 03:02:35 +00:00
is