379c9be4a8
More patches for ARC from Noriyuki Soda:
...
* commit isapnpvar.h changes required for ARC to support plain isa.
* fixup mistake over mips/include/cpuregs.h.
* mips/mips_machdep.c:
set L2 cache-size for arc, cleanup use of L2cache present
vs L2 cache-size variables. check for no L2 cache on kernels
configured to require one. misc cleanups.
* mips/mpis/trap.c: more locore stack-traceback label cleanup.
XXX Locore callbacks for mips3, mips4, r4600 cacheflush need more work.
1998-10-01 00:42:37 +00:00
6e32aa4af4
Invert the RXCOPY test. Note that most new platforms will not
...
have relaxed alignment so the de driver should just work on them.
1998-09-29 22:40:52 +00:00
3712546023
Changed to allow the mouse baud rate to be set at kernel compile time.
...
Inspired by Mochida Shuji <mocid@yo.rim.or.jp>.
1998-09-29 02:46:36 +00:00
bf8783afa4
Fix the receive length so it includes the extra bytes in the fddi_header.
1998-09-28 20:37:12 +00:00
43b462df88
Insert the FDDI control bytes in pdq_ifstart before we load the dmamap
...
and dmasync the data. Fix pdq_os_receive_pdu to use PDQ_OS_HDR_OFFSET
instead of PDQ_RX_FC_OFFSET.
1998-09-28 18:01:43 +00:00
a1528c368d
Fix transmit handling (this also should speed up transmits
...
slightly).
1998-09-28 17:13:54 +00:00
b12bfa760e
Make this compile again with no audio but with midi devices.
1998-09-27 16:43:56 +00:00
b2a68e14db
Change sources to be KNF
1998-09-26 19:53:34 +00:00
2cf169c563
Add AdvanSys ULTRA WIDE SCSI controllers
1998-09-26 16:20:31 +00:00
b207a7d09d
Change product ADVSYS 2300 to ADVSYS WIDE
1998-09-26 16:16:23 +00:00
da0a3e615e
Add support for AdvanSys Ultra Wide boards ABP-9xxUW
1998-09-26 16:09:32 +00:00
c6ccd1d83f
Remove Wide boards references
...
Adjust copyright
At this time this driver support the following AdvanSys boards:
- ABP-9xx
- ABP-9xxU
- ABP-9xxUA
1998-09-26 16:02:56 +00:00
4372d4402e
Remove Wide boards references
...
Update supported boards list
1998-09-26 15:52:55 +00:00
1338a7e982
hwreset(): delay required after diddling the medium selection bit.
1998-09-26 08:31:20 +00:00
9d52889ce7
correct obvious typo
1998-09-25 21:50:38 +00:00
1131320f18
Fix transmit underflow messages. (\0128 != \0 128)
1998-09-25 18:06:53 +00:00
ed652e2a09
Fix a silly yank-o.
1998-09-25 14:19:20 +00:00
c31e48b356
Reorder the ne2000devs entries. So all PCMCIA_VENDOR_INVALID and/or
...
PCMCIA_PRODUCT_INVALID entries comes first.
1998-09-23 21:22:41 +00:00
6da4cd8aac
Make dma_sbus.c dependent on dma_sbus attribute.
1998-09-23 08:48:25 +00:00
0c812cb0bc
Regenerate from pcidevs.
1998-09-22 23:00:44 +00:00
de8340f7fd
Add ALI M1531 Host-PCI bridge.
...
Add Cirrus Logic CS4610 and CS4280 Audio chips.
Add Cirrus Logic CS4400 communications controller.
1998-09-22 22:59:02 +00:00
d3e02fc461
Fix the accton support. Only set the board type it isn't an ISV.
1998-09-22 04:23:18 +00:00
7d6c07a559
Use the data32iot and data32ioh members of the wdc_attachment_data
...
structure for 32 bit transfers.
Test for 32 bit capability on data transfers currently restricted to 16 bit
only.
1998-09-22 00:27:51 +00:00
962edcdc03
Add data32iot and data32ioh members to the wdc_attachment_data structure.
...
This bus space tag and handle is used for 32 bit data transfers i.e.
when WDC_CAPABILITY_DATA32 is enabled as the 32 bit data register may
not be part of the standard drive registers.
1998-09-22 00:21:16 +00:00
0b10e1ddab
Parallel port support routines.
1998-09-21 21:26:51 +00:00
f9e261c5e4
LSI63854 based parallel port driver skeleton.
1998-09-21 21:20:47 +00:00
fa25d48556
Add `bpp' device: the parallel port glued onto the LSI64854 DMA controller.
1998-09-21 21:02:23 +00:00
5cc2c570d5
Add missing call to usbd_init().
1998-09-21 20:47:25 +00:00
3ad5f134c3
Regen.
1998-09-21 20:28:48 +00:00
e017934564
Add CS4235 joystick.
1998-09-21 20:25:52 +00:00
07bb8331e8
Roll back to 1.71 version- too many unexplainable problems with 1.72.
1998-09-21 14:53:58 +00:00
ad921921e4
Add softserial to the alpha port. This significantly improved PPP
...
throughput on com ports.
1998-09-21 00:33:16 +00:00
392f960b14
Regenerated .h files to fix "generated from" CVS id.
1998-09-20 21:08:49 +00:00
1c578d0ad2
Added support for a Dayna Communicard E that probes with a
...
different product id (0x2f) than the one we had (0x2d)
1998-09-20 19:19:53 +00:00
08e1d890a4
Changes so that BPF readers will get the data in fddi packet aligned along
...
normal boundaries. This makes tcpdump much happier.
1998-09-20 02:36:08 +00:00
935fbed4fe
Make sure data in FDDI packets are aligned nicely (for alpha, etc.)
1998-09-19 21:21:25 +00:00
24e6cd9435
Map the "backspace" key to "delete" and the "remove" key to
...
"keypad-delete". (This is not completely clean; for me these keys make
up perhaps a "function field", but no "keypad".)
This is the mapping expected by applications.
Proposed by Chris Jones via PR kern/6089 and Dave Sainty.
1998-09-18 15:35:45 +00:00
b85655c706
Use an appropriate value for wpp_quirk_flag.
1998-09-18 14:43:58 +00:00
b03b63aef4
Make these files compile again; no longer necessary to pass
...
iobase to comprobe1.
1998-09-18 14:38:48 +00:00
72fa4aec9b
regen
1998-09-18 10:51:15 +00:00
e630f429ab
Add PCI-VME interfaces: Tundra Universe and Bit3 2706
...
Note that Newbridge is now Tundra
Add Adaptec 7890 & Co.
1998-09-18 10:49:11 +00:00
c797d52571
SCSI_ASYNCREQ turns out to be redundant; we can simply free the scsipi_xfer
...
in scsipi_done() if the transfer is asynchronous. This reduces the size
of the critical section in scsipi_execute_xs() somewhat (in fact,
back to its original size).
1998-09-18 05:53:07 +00:00
9cf43305cf
Define a SCSIPI_XFER_ASYNC macro to test whether a request will be
...
completed asynchronously. Eliminate SCSI_ASYNCREQ, which is actually
redundant information.
1998-09-18 05:45:03 +00:00
e9a20eaff4
Regen.
1998-09-18 04:30:52 +00:00
0cf7fe7c62
Add yet another vendor ID for Fujitsu.
...
Add vendor ID for ESS Technology Inc.
Add product ID for ESS Technology ES1938 SOLO-1 AudioDrive
Add product ID for Fujitsu K56flex LTMODEM
Add product ID for TI PCI1250 PC Card bridge
Add product ID for Trident Cyber 9397 Video controller.
1998-09-18 04:30:10 +00:00
8fdc5aee4b
Make changes as required for new return values from dma setup routine
...
for isp. Unable to test in running kernel because they're not buildable today,
but should be okay.
1998-09-18 00:26:11 +00:00
6d8a22890e
dma setup now returns CMD_QUEUED or CMD_COMPLETE. Clarify a ternary
...
operation that needed some parentheses.
1998-09-17 23:10:20 +00:00
1dac5b5291
Several changes, including some stub fibre target mode stuff. Establish
...
a slightly different fibre startup (print ALPA now too). Change
the way that return values from dma setup is done. Make debug messages
out of some queue overflow situations. Turn PORT LOGGED OUT into
Selection Timeout equivlaent. On isp_restart actions don't blow off
the commands with HBA_BOTCH (XS_DRIVER_STUFFUP) - set them with HBA_BUSRESET
(which is defined as XS_DRIVER_STUFFUP until someone decides whether
the suggested change to the midlayer NetBSD is worthy of inclusion).
1998-09-17 23:05:46 +00:00
a0a31568e8
cleanup header to be just NetBSD, roll rev, change QDEPTH to QAVAIL macro
1998-09-17 22:52:54 +00:00
0e0010df41
cleanup header to be just NetBSD
1998-09-17 22:52:14 +00:00
jonathan