add opt_awi.h to define AWI_DEBUG, AWI_WEP_ARC4.
show the firmware version at attach.
create a framework to support WEP (encryption code is not included for now).
a new wiconfig compatible ioctl interface replaced the awictl interface.
fix memory leak in selecting AP
fix bugs in ESSID selection
changes from FreeBSD-current by Warner Losh:
revision 1.2
date: 2000/04/17 22:58:15; author: imp; state: Exp; lines: +16 -1
Provide mem* for compat with NetBSD to fix LINT
fixes from FreeBSD-current by Guido van Rooij:
revision 1.4
date: 2000/05/29 19:58:10; author: guido; state: Exp; lines: +5 -2
Fix a panic resulting from an obvious null pointer deref.
Apparently some other panics still exist in this driver, but with
this fix, it was at least possible to run the Nokia card at SANE 2000.
from devices connected to pckbc:
- Do actual sample collection in pckbc.
- Add rndsource_element_t to the slot data.
- Change pckbc_set_inputhandler() to take an additional argument,
the name of the device, which is (eventually) passed into
rnd_attach_source() to identify the source.
- Change callers of pckbc_set_inputhander() appropriately.
and scsipi_device respectively, with size reduction of ncr53c9x_softc.
Specifying NULL instructs the driver to use default adapter and default
device codes. Every target port has ncr53c9x_attach(sc, NULL, NULL) anyway.
have _detach() functions:
Ensure that softc keeps state about whether the attach succeeded,
and make the detach function return immediately if the attach did
not complete.
and QUEUE FULL cases; this is already done for all BAD_STATUS cases.
Make sure to requeue the SCB in the above cases internally in the driver,
the SCSI layer doesn't know how to deal with it properly.
some devices may not be found if the BIOS (which would normally
do the reset at startup) is disabled. Should really be done from the SCSI
layer.
Implement the SCBUSIORESET ioctl.
This bug is only visible on some disks, and I have verified that it works
correctly on VAX. However, du to the author, it is a problem on other
machines/disks as well. Here's the author's comments:
> The MI code for the NCR5380 has a small bug in it The RZ56 wants to
> negotiate for Synchronous Data Transfers and when it does, the current code
> looks like it will send a REJECT message as the spec calls for when we cant
> handle the request. However, a couple of lines of code in the
> ncr5380_msg_in routine are missing wrt the PARITY message and anything that
> wants to send a REJECT message. The ATN setup that is done in
> ncr_sched_msgout is immediately negated by the final byte ACK sequence in
> this routine. This causes bad things to happen to an RZ56.
re-enqueueing an already free ccb.
Prepare the background to have a unique initialization function for
all of the supported host adapters.
Rename a lot of #define in a more sane way.
Move Carriers initialization and defines in adwmcode.{c,h}
Don't lose Carrier nodes in case of a BUS/Chip reset explicitly invoked
after a DMA failure.
XXX - DMA failure still arise when AdvanSys U[2]W host adapters are used
in conjunction with Intel 82443BX Host Bridge/Controller (rev. 0x03).
!?!Have to understand why!?!
