wait when returning from the X console before reactivating the mouse.
Some systems may require more than the default (or may want less to get
faster response).
allow the selection mode hide the mouse before the device is closed, thus
fixing a minor problem (the pointer remained visible when returning from
X for some seconds).
intermitent changes on "volatile" interfaces based on if_spppsubr.c.
This interfaces used to cause ifwatchd to call the up and down scripts
with 0.0.0.0 addresses between entering PPP phase network and IPCP
completition.
bpm uses ftp(1) and pkg_add(1) to allow a menu-based addition of
binary packages from a URL. It first displays a list of categories,
and, within categories, binary packages, which can be added to the
local system simply by choosing them from a menu.
If no valid categories are found, a warning message will be displayed
(it is usually caused by people running NetBSD-current, and there are
rarely binary packages provided for such a fast-moving target, and the
"-r release" command-line switch to bpm(1) should be used).
Bump the pkg_install version number for this.
the file descriptor handling mess in lib/file.c.
also use --fast-read where applicable.
result of pkg_info -B on 1.5ghz pentium4, linux:
before after
mozilla-1.4nb1.tgz 1.96sec 0.04sec
mozilla-1.4nb1.tbz 18.66sec 0.21sec
866mhz pentium3, NetBSD:
before after
mozilla-1.4nb1.tgz 2.22sec 0.07sec
mozilla-1.4nb1.tbz 16.29sec 0.34sec
-rw-r--r-- 1 grant users 13816195 Dec 20 13:59 mozilla-1.4nb1.tbz
-rw-r--r-- 1 grant users 15814227 Dec 20 13:58 mozilla-1.4nb1.tgz
XXX fetches over ftp/http still read the whole file.
and spit out a warning if any of them differ. bail if the OS or arch
differ. installation can be forced with -f.
sanity checked by simonb. fixes PR pkg/18966 from mrg.
to a 2-clause licence (retaining UCB clauses (1) and (2)), per PR
22409 from Joel Baker, approved by Theo de Raadt, and ratified by
myself - the only discrepancy being the handling of the original
clause 3 in src/usr.sbin/yppoll/yppoll.c.
Uses a hook in spec_strategy() to save data written from a mounted
file system to its block device and a hook in dounmount().
Not enabled by default in any kernel config.
Approved by: Frank van der Linden <fvdl@netbsd.org>
Jason Thorpe suggests removing the limit altogether; anyone who needs
more than 1024 nfsds can still do "nfsd -n 1024" multiple times, and
this provides _some_ saftey-net against nfsd (issued by root) from
eating all the avaiable process slots.
-adjust for new libs, programs and source files
-replace generated config.h and mkver
-add Frederick Bruckman's awk implementation of "ntptrace" as a
replacement for the perl program in the original tree
Remove dom_server_port from struct _dom_binding. It's never initialised
and used in only one place, where dom_server_addr.sin_port was probably
intended.
This code is not to be reenabled again until it is fixed to my satisfaction
(as a member of core and the person who ends up dealing with most of
the host tool build bugs)
the boot blocks on the existing mounted root file system, and
eliminating references to bootxx_ufs.
I referenced the a partition even though most other ports seem to
reference the c partition. I don't know if that's the most correct
way to do it, but it seems to work for me and no one can tell me what
the canonical method is. I'd let someone else fix the man page but no
one seemed to want to and it really needed the example.
* Rename "config.h" to "nbtool_config.h" and
HAVE_CONFIG_H to HAVE_NBTOOL_CONFIG_H.
This makes in more obvious in the source when we're using
tools/compat/config.h versus "standard autoconf" config.h
* Consistently move the inclusion of nbtool_config.h to before
<sys/cdefs.h> so that the former can provide __RCSID() (et al),
and there's no need to protect those macros any more.
These changes should make it easier to "tool-ify" a program by adding:
#if HAVE_NBTOOL_CONFIG_H
#include "nbtool_config.h"
#endif
to the top of the source files (for the general case).
* Don't bother prefixing commands with a line of ${_MKCMD}\
and instead rely upon "make -s". This is less intrusive on
all the Makefiles than the former. Idea from David Laight.
* Rename the variables use to print messages. The scheme now is:
_MKMSG_FOO Run _MKMSG 'foo'
_MKTARGET_FOO Run _MKMSG_FOO ${.TARGET}
From discussion with Alistair Crooks.
the same string into "last message repeated N times", and instead forces
syslogd to write out every message.
Based on '-c' in FreeBSD's syslogd, although a different option letter was
chosen because their syslogd requires '-c -c' to get this functionality,
and we don't have the support for logging to pipes which is what FreeBSD's
syslogd with a single '-c' is related to.
first three bytes to determine how much of the BPB to preserve.
Supported values:
eb 3c 90 FAT16 BPB
eb 58 90 FAT32 BPB
(anything else) don't preserve any BPB
This is because the BPB is generally only the FAT16 one except in the
bootxx_msdos case, where it's the larger FAT32 one.
removing the advertising clause. Diffs provided in PR 22410 by Joel
Baker, confirmed to the board by Jason Downs.
With additional thanks to Jason Thorpe.
<sys/bootblock.h>:
* Added definitions for the Master Boot Record (MBR) used by
a variety of systems (primarily i386), including the format
of the BIOS Parameter Block (BPB).
This information was cribbed from a variety of sources
including <sys/disklabel_mbr.h> which this is a superset of.
As part of this, some data structure elements and #defines
were renamed to be more "namespace friendly" and consistent
with other bootblocks and MBR documentation.
Update all uses of the old names to the new names.
<sys/disklabel_mbr.h>:
* Deprecated in favor of <sys/bootblock.h> (the latter is more
"host tool" friendly).
amd64 & i386:
* Renamed /usr/mdec/bootxx_dosfs to /usr/mdec/bootxx_msdos, to
be consistent with the naming convention of the msdosfs tools.
* Removed /usr/mdec/bootxx_ufs, as it's equivalent to bootxx_ffsv1
and it's confusing to have two functionally equivalent bootblocks,
especially given that "ufs" has multiple meanings (it could be
a synonym for "ffs", or the group of ffs/lfs/ext2fs file systems).
* Rework pbr.S (the first sector of bootxx_*):
+ Ensure that BPB (bytes 11..89) and the partition table
(bytes 446..509) do not contain code.
+ Add support for booting from FAT partitions if BOOT_FROM_FAT
is defined. (Only set for bootxx_msdos).
+ Remove "dummy" partition 3; if people want to installboot(8)
these to the start of the disk they can use fdisk(8) to
create a real MBR partition table...
+ Compile with TERSE_ERROR so it fits because of the above.
Whilst this is less user friendly, I feel it's important
to have a valid partition table and BPB in the MBR/PBR.
* Renamed /usr/mdec/biosboot to /usr/mdec/boot, to be consistent
with other platforms.
* Enable SUPPORT_DOSFS in /usr/mdec/boot (stage2), so that
we can boot off FAT partitions.
* Crank version of /usr/mdec/boot to 3.1, and fix some of the other
entries in the version file.
installboot(8) (i386):
* Read the existing MBR of the filesystem and retain the BIOS
Parameter Block (BPB) in bytes 11..89 and the MBR partition
table in bytes 446..509. (Previously installboot(8) would
trash those two sections of the MBR.)
mbrlabel(8):
* Use sys/lib/libkern/xlat_mbr_fstype.c instead of homegrown code
to map the MBR partition type to the NetBSD disklabel type.
Test built "make release" for i386, and new bootblocks verified to work
(even off FAT!).
a null ("") argument properly (hi, Sun), so make -S a synonym for -s "".
Don't dump core if no command is given to pkg_admin(1).
Print usage message to stderr, not stdout, and use the program name by
which it was invoked.
Bump pkg_install version to 20030918.
ensuring that recursive pkg_delete'ing works by using the correct
pkg_dbdir to find packages. This fixes recursive deleting if the
-K flag is passed to pkg_delete(1), and the named dbdir differs from
the default dbdir (/var/db/pkg).
the file removal when deleting linkfarms if the expected file doesn't
exist. Since the symlink isn't there, the mission is already accomplished,
so why bother with the warning?
adding two new options to pkg_admin(1) to simply using this utility to
list the bare package names that match patterns when looking in PKG_DBDIR:
-b Print only the basenames when matching package names for
lsall and lsbest.
-d lsdir
Set lsdir as the path to the directory in which to find
matching package names for lsall and lsbest.
in this man page: depoted packages are kept in their depot directories, and
pkg_view(1) manages instances of those packages in views. Also copy the
warning in the pkg_delete(1) man page instead of the one from the
pkg_add(1) man page since the former correctly refers to package control
files already installed on the system.
* Teaching pkg_add(1) to be smarter about how to add a depoted packge.
* "pkg_delete foo" only deletes foo if it's a unique package.
* Teach pkg_admin(1) two new commands "add" and "delete" for working
with pkgdb.byfile.db.
* pkg_view(1) uses the new pkg_admin(1) commands to keep the
pkgdb.byfile.db files consistent in each view.
unique package. This makes deleting packages less surprising in a pkgviews
world where you can have multiple versions of packages installed at the
same time in the package depot.
Also make "pkg_delete -f" work depoted packages if they have been added to
views by also running "pkg_delete -f" for the package instances in the
views.
add pkg ...
For each listed package, write the absolute pathnames of the
files listed in its +CONTENTS file together with the package
they belong to into the package database. This should be used
only by pkg_view(1).
delete pkg ...
For each listed package, remove all file entries in the
package database that belong to the package. This should be
used only by pkg_view(1).
These commands will be used by pkg_view(1) to keep the pkgdb.byfile.db
files for each view consistent with what's stored in each view.
Since we stole these names from the debug code, change the names of the
debug commands to "addkey" and "delkey".
but the size of the data field in the pkgdb.byfile.db file is the length of
the string plus 1 for the NUL. Fix this check so that removing all of the
files belonging to pkgname from pkgdb.byfile.db works again.
included. This is done by tracking the current directory for the
file being parsed, and constructing a path relative to that directory
when an include directive's file name begins with "./".
startup time ("reboot" of cron, not the system), so okay_to_go() must
always say they are good to go. Otherwise they never will. All other
meta-timetags pertain to regular times, so they are (or were)
unaffected.
Problem noted by tron and successfully assigned to me by perry.
wrappers for err, errx, warn and warnx respectively when running in foreground
and call syslog functions when running in daemon mode.
Also add and use an extra log_info function for other types of information.
button events. This mode needs to be explicitly enabled at runtime, and
does nothing if not configured.
As there are now two different modes available, adjust the manpages
accordingly, describing what they do and how they work separatedly.
While here, remove a bunch of unused stuff (event syntax) from config file
parsing. This was initially added with this new mode in mind, but it has
not been used to make it a lot simpler.
described by a structure with pointers to functions.
- Clearly separate the "selection" mode (which provides copy and paste support
in console) from wsmoused's main program.
- Added the "modes" property to the configuration file and the "-m" command
line option to specify which modes should be activated. (this is mostly
useless for now, as only the "selection" mode exists; a new mode will
be added soon, hopefully).
- While here, several style fixes according to share/misc/style.
and more) and use a little sig_header() helper.
- in selectdrives() make sure we don't overwrite some arrays. this makes
"iostat 1" work again on my really wide screens where defdrives (number that
can fit) was > ndrives (number of drives), rather than dump core trying to
print (char *)1...
* DPSRCS contains extra dependencies, but is _NOT_ added to CLEANFILES.
This is a change of behaviour. If a Makefile wants the clean semantics
it must specifically append to CLEANFILES.
Resolves PR toolchain/5204.
* To recap: .d (depend) files are generated for all files in SRCS and DPSRCS
that have a suffix of: .c .m .s .S .C .cc .cpp .cxx
* If YHEADER is set, automatically add the .y->.h to DPSRCS & CLEANFILES
* Ensure that ${OBJS} ${POBJS} ${LOBJS} ${SOBJS} *.d depend upon ${DPSRCS}
* Deprecate the (short lived) DEPENDSRCS
Update the various Makefiles to these new semantics; generally either
adding to CLEANFILES (because DPSRCS doesn't do that anymore), or replacing
specific .o dependencies with DPSRCS entries.
Tested with "make -j 8 distribution" and "make distribution".
hubertf