ce477983b4
The previous change didn't even compile due to a warning.
...
Also, fix the same core dump in the case where there are no `_build' lines.
These should probably both emit a warning, so the user knows what happened.
1999-04-20 14:22:32 +00:00
d18c4ee21d
use mkstemp
1999-04-20 13:53:53 +00:00
eb6ee238a9
use mkdtemp not mktemp/mkdir.
1999-04-20 13:52:36 +00:00
554cdf7fe9
No more core dump if _crunch section is missing in man.conf
1999-04-20 10:59:13 +00:00
7c3542d098
Add the rnd pseudo device.
1999-04-20 09:30:08 +00:00
902004cefc
Don't try and calculate the time in microtime() unless cpu_initclocks()
...
has already been called and thus we know the values the timers are using.
This also ensures that clock_sc will always be valid when we try and use
it to read the timer registers.
Fixes PR7357.
1999-04-20 09:14:32 +00:00
7ef0b55f16
use mkstemp.
1999-04-20 08:05:51 +00:00
c08b0cf381
check some more syscall return values. use mkstemp.
1999-04-20 07:53:02 +00:00
525cc80c04
use mkstemp
1999-04-20 07:24:49 +00:00
3e4fcb2e57
newlfs -> newfs_lfs.
1999-04-20 07:15:38 +00:00
713d4e0462
KNF nits.
1999-04-20 06:48:58 +00:00
ad52a7fe49
make this compile again with no rcons.
1999-04-20 06:42:54 +00:00
702267a538
options INSECURE, like i386
...
pckbc* -> pckbc0, like i386
1999-04-20 06:16:35 +00:00
dc3b870fce
Add NFS_BOOT_DHCP so that netboot kernels can find the root filesystem.
1999-04-20 05:56:52 +00:00
1065cb27a3
s/NFS_BOOT_BOOTP/NFS_BOOT_DHCP/
...
DHCP is a superset of BOOTP, and still works with BOOTP servers.
1999-04-20 05:54:44 +00:00
3685172739
More punctuation glitches.
1999-04-20 05:49:50 +00:00
bbeb5012d5
Add dummy bus_space_barrier method, like mac68k
1999-04-20 05:48:37 +00:00
89f51b033e
Fix formatting of kill commands.
1999-04-20 05:44:42 +00:00
62af15cbc6
Fix a few obvious formatting glitches: missing paragraph break, highlighted
...
parens.
1999-04-20 05:31:55 +00:00
a6b6e0db55
Don't rebuild the cat page if the time stamp is the *same*; this can happen
...
just because `make install' ran quickly.
1999-04-20 05:02:36 +00:00
055b827e11
Calling DELAY() during polling for command completion of the normal
...
per-packet discard of every received packet increases latency and
decrease throughput. INstead, Spin on S_COMMAND_IN_PROGESS for enough
iterations as the expected time to completion. Only do DELAY()/poll
loops (as suggested by Jason Thorpe) if spinning fails.
Take PCI as fastest case and compute worst-case estimate.
Shorten DELAY() in S_COMMAND_COMPLETE polling-loop up 10, loop-count
down. to speed up epreset() completion (m/c filter change, ifup/ipdown, etc).
1999-04-20 04:40:24 +00:00
955a0aba21
Until <bsd.lib.mk> is fixed, don't try to guess whether or not to
...
use abicalls in kernel source.
1999-04-20 00:45:24 +00:00
6f626b2c13
Add dist/*_obsolete files, used by sysinst. These files have been manually
...
generated from distrib/sets/lists/*/obsolete{mi,i386} files. A better
way to get them should be found ...
1999-04-19 23:55:28 +00:00
0fd0e10d43
Discuss netboot on 3000/xxx and other old SRM systems. Reported by Charles.
1999-04-19 23:38:38 +00:00
07c7535688
* Make doubly sure that the ep shutdownhooks are run at splnet() or above.
...
* Clear the `enabled' bit in the softc so late hardware interrupts
(e.g., just after the full reset) done as part of shutdown) are dropped.
* Eliminate loops that poll forever on S_COMMAND_IN_PROGRESS to complete.
Add inline function with bounded loopcount plus small delay, to avoid
bugs in EISA hardware which never sets S_COMMAND_IN_PROGRESS.
Use for both TX_RESET/RX_RESET/GLOBAL_RESET cmds, and polling for
discard-Rx completion
1999-04-19 23:26:48 +00:00
f30375cda0
Dispatch to the debugger from the Intruction Fault trap vector directly,
...
rather than doing it from trap(). This so we can switch to a temporary
stack for the debugger (in a forthcoming commit).
1999-04-19 23:24:14 +00:00
d24359e5c8
Define BPT and BUGCHK Intruction Fault codes.
1999-04-19 23:22:19 +00:00
f4f212fdef
Two changes.
...
- Now that fsck is only the wrapper for fsck_*, ffs upgrade options
should passed through with -T option. fsck_ffs is also required to
be copied with fsck.
- fsck_ffs may request large memory when the partition is big.
Configure swap device even when the RAM > 4MB.
1999-04-19 22:44:37 +00:00
94281e536b
Declare more local items static.
1999-04-19 21:56:01 +00:00
2e7ad061ee
Mention COMPAT_SVR4 on m68k here, too.
1999-04-19 21:49:34 +00:00
2f2ccae89b
Add definitions for all those m68k ports.
1999-04-19 21:47:49 +00:00
d1a579c82b
Mention m68k.
1999-04-19 21:37:23 +00:00
6030338702
Add svr4_machdep.h.
1999-04-19 21:34:16 +00:00
ed74932033
Add COMPAT_SVR4 for m68k.
1999-04-19 21:22:56 +00:00
36e329cd5b
Define FP as a synonym for A6.
1999-04-19 21:19:08 +00:00
ed50b0305d
add # comment character in front of RCS Id.
1999-04-19 21:09:59 +00:00
6a9c669828
Move linux_reenter_syscall() to a common location and rename it to
...
reenter_syscall() - it's going to be shared with COMPAT_SVR4 and soon be
used by native code.
1999-04-19 20:58:37 +00:00
4b0326d939
Get rid of delay() in com_common_putc() because the Shark delay() is borked
...
and can't be called until after the timers are setup. (It should not use
a timer, or it should have a fallback algorithm.)
1999-04-19 19:27:31 +00:00
cc712cde63
Make the memory sizing code *really* work on mvme167.
1999-04-19 19:15:50 +00:00
0e603b27d7
+LFS +MFS
1999-04-19 16:57:06 +00:00
d9010c853c
Don't try to init the L2 cache if there is no L2 cache. (KA640)
1999-04-19 14:50:57 +00:00
6954ab0ad7
Take a stab at making SVR4_MAKEDEV more flexible towards multiple architectures.
1999-04-19 14:46:27 +00:00
69ead14e9b
in uvm_map_extract(), handle the case where the map entry being extracted
...
is large enough to cause the end address of the new entry to overflow.
1999-04-19 14:43:46 +00:00
aded74faa1
Update the set split counts for floppy installation to match reality.
1999-04-19 13:17:09 +00:00
3bfdbeb280
Add MLINKS-generated entries for pool_*.9 and resort pool_*.0 entries.
1999-04-19 04:56:18 +00:00
b51089597f
Really really really say goodbye to old wscons. I mean it this time.
1999-04-19 04:20:13 +00:00
6c1e99c770
Add a NetBSD RCS tag to each distrib list file.
1999-04-19 03:11:31 +00:00
d727686794
Ignore lines starting with a ``#'' in the set list files.
1999-04-19 02:33:40 +00:00
8d5192534f
Include the symlink from /usr/X11R6/bin/X to Xpmax.
...
Delete the preceding directories - they exist in xbase.
1999-04-19 02:26:11 +00:00
17d18eb235
NetBSD/pmax now uses the X11R6 X server.
1999-04-19 02:03:27 +00:00
mycroft