Commit Graph

74 Commits

Author SHA1 Message Date
soren c1e87c4d5e Also install on cobalt. 2000-03-19 23:01:07 +00:00
perry 39546c529f add bootselect MLINK -- from jhawk 2000-03-06 01:23:11 +00:00
hubertf 04a9ed5842 Revert last change, it was caused by the build not picking the
right files if DESTDIR is set.
2000-02-11 16:14:32 +00:00
hubertf e597c0a106 s/STRIP/STRIPPROG/ 2000-02-11 15:36:25 +00:00
tsutsui c539ff5d84 STRIPPROG -> STRIP 2000-02-01 06:00:35 +00:00
soda 07a6bcdde4 Build fdisk also on arc 2000-01-31 15:54:48 +00:00
hubertf 92bd305e4a Add note that "fdisk -i" is the same as "fdisk /mbr" on MSDOS. 1999-10-11 01:04:57 +00:00
enami d758f82f45 Oops, needs an operator. 1999-09-25 04:27:55 +00:00
enami cd2531c01e Build fdisk also on hpcmips. 1999-09-25 04:26:28 +00:00
enami 62d623bfc4 Don't decend into the subdirectory mbr_bootsel except i386,
since it currently doesn't contain MI thing and not compile
on ofppc box (thanks Wolfgang) and probably on bebox box.
1999-09-25 04:18:20 +00:00
simonb 2bb88f2837 Fix tyop and clean up usage of commas a little. 1999-09-21 12:09:25 +00:00
soren b49886ea7a Update usage().
Prevent buffer overflows when configuring boot selector.
Cycle through partitions when entering boot names.
Use '<UNUSED>' consistently.

Reviewed by: fvdl
1999-09-06 23:58:59 +00:00
sakamoto 8ecadeaecd Build fdisk on bebox and ofppc(replaced powerpc). 1999-07-02 17:48:26 +00:00
thorpej 7d344bb51b Make sure the boot selector actually gets updated if you only change
the timeout and/or the default menu choice.
1999-06-04 18:59:15 +00:00
fvdl 6a2c64449b Sanity check the drive number in %dl and use it instead of blindly
assuming disk 0.
1999-05-02 13:48:30 +00:00
fvdl 7d18a1432b Tighten check for bad drive numbers to avoid passing garbage to the
2nd stage loader.
1999-05-02 12:20:01 +00:00
fvdl c0042f7871 Because of space constraints, error messages got shortened. Reflect this
in the manual page.
1999-05-02 12:18:40 +00:00
fvdl cbf8e59c01 Make check if we need int13 extensions for the bootselector more correct. 1999-05-02 12:17:48 +00:00
fvdl 5a48cda98a Remove confusing entry about cylinder boundaries. 1999-05-02 12:17:13 +00:00
ross 255793452f Since fdisk/mbr contains a man page, we need to descend into it regardless
of which ${MACHINE} we are.
1999-05-02 04:42:47 +00:00
christos 8eeaf82ae4 - Use the proper multiply instructions so that we don't get truncated.
- Fix comparison, which did not work before.
1999-04-30 15:29:44 +00:00
fvdl a6f7895b92 Only use int13 extensions if the sectors can not be read through the
older CHS interface. This works around stupid BIOSs who report that
int13 extensions are present and functional, but fail when you actually
use them. Like Adaptec SCSI BIOSs.

For the bootselector, there was no space to get the CHS info from
the BIOS. Instead, use a flag that can be set by fdisk. fdisk will
set it if one of the partitions on the disk is out of CHS reach
for this disk/BIOS, so that the bootselector will use int13 extensions.
This isn't so bad, because it needs to be configured via fdisk anyway.

Change the mbr manualpage to reflect some shorter error messages.
1999-04-28 23:27:01 +00:00
fvdl 48c1c25ba5 Make the bootselector configurable by fdisk. Add a -B flag to this
effect (i386 only of course). Also change one branch in the
bootselector code to an explicit 16 bit one, and check both
the boot menu and partition tables to see if the partition
requested by the user should be booted. This check just in case,
should the bootselector menu and partition table get out of sync
somehow. (mmm, bytesqueezing)
1999-04-17 01:38:00 +00:00
fvdl 7adcf112ca Add a manual page describing the MBR and the bootselector. 1999-04-15 22:35:19 +00:00
fvdl fa9bff9be1 Add and build a bootselecting MBR (i386). 1999-04-15 22:31:23 +00:00
christos 22f9ed8d9b Make it work for both elf and a.out 1999-03-24 16:02:41 +00:00
mycroft f6590b22cd Clean up SYNOPSIS formatting. 1999-03-07 11:02:05 +00:00
lukem dcab0210a0 convert from NOxxx= to MKxxx=no.
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
perry 9a8b75daeb add BeOS entry, from URA Hiroshi, PR 6974 1999-02-09 19:11:46 +00:00
ws f0a4bb6818 Use the drive parameter from the partition table
to support booting from the second disk.
1999-02-08 21:52:43 +00:00
ws faf59c0aba Initialize drive number in DL (not done by some BIOSs).
If you want to use 32-bit addresses, be sure to init the high bits, too.
Some additional register saves around BIOS calls (just in case).
1999-01-28 14:14:04 +00:00
thorpej 3a6110fd02 Use <sys/disklabel_mbr.h>. 1999-01-27 21:41:31 +00:00
jonathan 9fe4d42638 Set otherwise-unused global variable `disksectors' to disklabel.d_secperunit.
Change   fdisk -S to  emit disksectors as DLSIZE (for benefit of sysinst.)
1998-11-08 00:29:08 +00:00
ws 1cd9ec3c71 Separate master bootcode from fdisk. 1998-10-15 15:23:23 +00:00
ws 3cdac6d69c Separate master bootcode from fdisk.
Add int13 extension support to master bootcode.
1998-10-15 15:22:13 +00:00
ws ba2f852285 Completely zero out a partition table entry,
if type, start and size are given as zero.
1998-10-02 17:23:22 +00:00
ws d8881a6f9a Automagically initialize boot code and partition table if not yet valid.
Don't touch the partition table on -i, if previously valid.
1998-09-28 15:44:18 +00:00
rvb db826b28d9 Dont report more than 1023 cylinders for DOS/BIOS because
the code below will truncate to a 10 bit field.  This
can cause major problems later for DOS.
1998-08-10 18:46:29 +00:00
drochner c0f9ff25e7 Use the new NetBSD partition ID for first time setup of an MBR. 1998-02-25 14:19:12 +00:00
drochner 707f944948 update for new partition ID 1998-02-19 15:15:29 +00:00
drochner 43e4e2726a Add new NetBSD partition ID.
Update information about partition types - add missing types, insert
"reserved" for IDs which are marked as "officially reserved" in other
lists.
Sources of information:
-"How it Works -- Partition Tables" by Hale Landis <hlandis@ibm.net>
-Ralph Brown's interrupt list
1998-02-19 14:47:43 +00:00
ghudson 70698891e2 When estimating the number of cylinders in the BIOS geometry, use the
total number of sectors as reported by disklabel.d_secperunit rather
than multiplying out the disklabel geometry, which is less accurate.
1998-02-07 16:19:16 +00:00
perry 34a98169f0 macroize BSD, NetBSD, FreeBSD and misc cleanup 1998-02-06 05:54:12 +00:00
mikel b545bd186c Don't print "DOS partition initialized" if -S set; from Nathan
Williams in PR bin/4893.
1998-02-02 06:39:41 +00:00
enami 24ec6663fe Add missing cast. This is a minimum fix to avoid overflow which causes
core dumps with some disk geometry.
1997-12-22 01:54:07 +00:00
ross 2ac0cdeda9 Typos, English. 1997-11-26 04:26:27 +00:00
phil a8d52993f0 Backout the prototype of opendisk(). 1997-09-30 17:29:40 +00:00
phil c342d989c5 Prototype opendisk(). 1997-09-30 17:09:13 +00:00
lukem 216ef04613 switch to using opendisk(3) from libutil 1997-09-25 05:08:28 +00:00
lukem 2ddc10a0ab define WARNS?=1 for all of sbin/* 1997-09-15 12:45:47 +00:00