455e3228dd
Sync if if_sl.c,v 1.66:
...
Move the VJ uncompress code into the software interrupt.
2001-01-11 22:56:51 +00:00
e94e4a6d47
Move interrupt mapping before initialization of the card (which might
...
cause interrupts). This works around a problem on sparc64, where
interrupts without installed handler seem to cause heavy lossage (and
interrupts are already enabled at this stage of autoconfiguration).
2001-01-11 22:46:40 +00:00
c292853354
Plug a memory leak.
2001-01-11 22:43:02 +00:00
7c1a1a3ae8
Process STRIP software interrupts.
2001-01-11 22:32:21 +00:00
1ce7cbc90b
Sync with if_sl.c,v 1.65:
...
Once we have a complete frame, schedule a STRIP software interrupt,
and manipulate ipintrq from there. This will allow us to clean up
the use of splimp() in this file later.
2001-01-11 22:31:49 +00:00
5159a10d97
Share <machine/elf_machdep.h> between arm26 and arm32.
2001-01-11 22:28:06 +00:00
a5ee0c0a19
Sync with if_sl.c,v 1.64:
...
Make the buffer management in STRIP just a little less evil.
2001-01-11 22:23:11 +00:00
a2dacbe06d
Switch over to using the generic arm header files for everything that arm26
...
and arm32 agree on.
2001-01-11 22:07:53 +00:00
68ac1c6fc3
Add some infrstructure to support saving FPU state.
2001-01-11 22:03:52 +00:00
7c5fe175c0
Defer output processing to the software interrupt.
2001-01-11 21:15:58 +00:00
fd0605fc53
Mmm, dependency problems. Add a cast to make PROC_PC() actually
...
work.
2001-01-11 21:08:18 +00:00
dc037466f5
Install all the headers (arm32 does).
2001-01-11 21:05:03 +00:00
1add2fd369
Remove <arm/endian_machdep.h>, since we might get a big-endian ARM port
...
some time.
2001-01-11 21:03:10 +00:00
8fcc8721da
Put the UQ_ASSUME_CM_OVER_DATA quirk back in. Without it, the Ricochet GS modem fails to work even with the other changes.
2001-01-11 20:35:02 +00:00
0d99070cf2
Change wi(4)'s default from ad-hoc mode to BSS mode. Also
...
some minor manpage fixes.
2001-01-11 19:33:51 +00:00
e292dc9609
Move userret() into a header file, in preparation for splitting
...
syscall() into plain and fancy.
2001-01-11 18:44:29 +00:00
f1152a965b
Modeled after mycroft's changes to the Alpha port, add PROC_PC() to
...
get profiling out of userret(), and move the preemption check to ast().
2001-01-11 18:30:16 +00:00
b2bcd7ceb9
Use MI clock_subr.c.
2001-01-11 16:09:42 +00:00
7424b1f3c1
Grotty hack to attach names to interrupts.
...
Should be fixed when I next overhaul this code.
2001-01-11 14:56:07 +00:00
4f8dfdb556
Don't copy Rx packet to mbuf if it has invalid length; just discard it.
...
Fixes kern/11877.
2001-01-11 14:38:58 +00:00
9caeb5a28b
isinram() argument is not a virtual address but a physical address.
2001-01-11 14:24:04 +00:00
0ef9589af4
X68k's physical RAM is not at lowram-0xffffffff, but has multiple segments.
2001-01-11 14:00:11 +00:00
8829b4cc1a
Sync. w/ luna68k; eliminate irrelavant code imposed by
...
the restriction of hp300 hardware and HP-UX compatibility.
2001-01-11 13:18:36 +00:00
366e0029a8
Ad ezload attribute for EZ-USB firmware loader.
2001-01-11 13:14:08 +00:00
3a755611ac
about WI_TIMEOUT:
...
It is not enough to initialize NANOSPEED ROOT-RZ2000 WLAN Card.
In fact, this card needs about 66900 counts.
2001-01-11 11:54:21 +00:00
a86eb3e683
NANOSPEED ROOT-RZ2000 WLAN Card work.
...
(PRISM II)
2001-01-11 11:37:54 +00:00
c8cf783ce8
regen
2001-01-11 11:33:19 +00:00
b7cad127b5
add product
...
NANOSPEED ROOT-RZ2000 WLAN Card
2001-01-11 11:32:56 +00:00
950e1bd9b8
Eliminate EIOMAPSIZE.
2001-01-11 10:40:55 +00:00
77f3a6ab78
G/C.
2001-01-11 10:36:46 +00:00
65137701cf
g/c the HP/UX core-dump code; it references a function which no longer exists.
2001-01-11 08:44:36 +00:00
35e36fee18
Add USSCANNER_DEBUG
2001-01-11 06:33:51 +00:00
d03f7a8f4b
Mention that I found protocol info in the Linux driver.
2001-01-11 06:33:22 +00:00
7d90b0cb9c
Note that I got information about the protocol from the Linux driver.
2001-01-11 06:20:04 +00:00
d968e32c3a
Add usscanner.
2001-01-11 06:03:21 +00:00
4dc9c52505
Add usscanner and uyap.
2001-01-11 06:01:18 +00:00
8765aa2c42
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol.
...
Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's
not visible in the driver).
Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for
testing.
XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 06:00:31 +00:00
85c0b91ee4
fix pointer arithmetic
2001-01-11 05:31:02 +00:00
35b9cac9d5
regen.
2001-01-10 23:48:54 +00:00
263cb744f8
add EMTAC A2424i 11Mbps WLAN Card
2001-01-10 23:47:56 +00:00
4c9cb837ba
Move the VJ uncompress code into the software interrupt.
2001-01-10 23:29:42 +00:00
8c2f65891f
Prefer memory mapping over io mapping for this card too,
...
although it doesn't have a chance to work on a no-io system because
of an io based BAR lacking a mem counterpart.
2001-01-10 21:41:36 +00:00
a42939d604
Make the driver try mapping memory first, the try io.
2001-01-10 20:31:49 +00:00
0cc28d54b1
... this one's utterly pointless though.
2001-01-10 19:05:46 +00:00
29de7da78b
Header files which don't differ between arm32 and arm26 and can thus be
...
shared.
2001-01-10 19:02:05 +00:00
a688af5edf
if 2nd parameter of key_acquire() is NULL it panics.
...
key_acquire () does not really require 2nd argument.
1.179 -> 1.180 on kame.
2001-01-10 18:52:51 +00:00
5a91dd00b9
Add "arm" to the "machine" line, so we get files.arm pulled in, and more
...
importantly, the arm->arch/arm/include symlink.
2001-01-10 18:38:37 +00:00
9e0af76a89
Empty file to keep config happy.
2001-01-10 18:33:47 +00:00
6a4e1f2a38
Descend into the arm directory on arm26 and arm32.
2001-01-10 18:23:47 +00:00
f4774e6659
Skeleton ARM include infrastructure.
2001-01-10 18:23:02 +00:00
thorpej