Fix PR port-sparc64/34863.
This also caused warning on old NetBSD environments (with GNU awk) like
awk: cmd. line:80: warning: escape sequence `\#' treated as plain `#'
INTPTR_IS_LONG, not INTPTR_IS_ULONG -- the latter is unused in
other parts of lint's code. This stops vax's lint from complaining
about conversion of integer constants to 'unsigned long' in function
argument lists, via a proper define of INT_RSIZE in common/inittyp.c.
sh3 defined this to 0, so was actually not affected, but better to
eradicate the typo there as well.
SPECIAL prog {objs,objpaths,keepsymbols} itemX
lines (where "prog" is fixed) in crunchgen configuration the same as
SPECIAL prog {objs,objpaths,keepsymbols} item1 ... itemN
OK by David Laight
Remove the apparently always true "styp(nt) != SHORT" part of the
innermost test. Allow atomatic conversion of literals as long as
they fit into the target type.
This should fix some of the lint issues in proplib on some of our
platforms.
Approved by christos.
targets integer data type value ranges. For now we just use the
hosts uint64_t for parsing & storing integers constants, and test
against the targets limits and assign appropriately, instead of
sometimes (inappropriately) going via the hosts u_long type. As
long as none of our architectures have target long or quad data
types strictly larger than 64 bits, we should be fine with this
fix.
Furthermore, as they stand at the moment, we can't use the current
TARG_INT_MAX and TARG_LONG_MAX constants in C preprocessor expressions,
so remove the conditional on them being equal. Yes, this will
produce dead code for some targets.
This allows an ilp32 host to lint for an lp64 target which uses
e.g. the targets ULONG_MAX constant without triggering an "integer
constant out of range" warning.
OK'ed by christos.
Rename 'allsrc' to 'curSrcs' so that the variable passed to ParseDoSrc (etc)
has the same name as the local in the calling routine, rather than a name
that seems to imply a more global and persistent list.
- don't blindly walk before the beginning of the buffer because of a
corrupt dependency file. In this case the first character of the
dependency file was a :
loop continue part. Remove the 'free(line)' from teh end of the loop body,
change the gotos into continues and collapse out some 'else if's.
All in the name of code transparency. No functional changes.
(Almost all the debug output went there, but some went to stderr.)
Split the parsing of -d (debug flags) out into its own routine.
Allow the output filename to be changed by specifying -dF<file> to create
a log file, or -dF+<file> to append to it. <file> may be stdout or stderr.
Also change so that -d-<flags> acts on <flags> locally but doesn't copy
them to MAKEFLAGS so they aren't inherited by child makes.
I'm not 100% happy with the command line syntax for the above, so they are
currently undocumented.
entries, so allocate at startup.
Use an 'int jobPipe[2]' within the job structure, and create pipes directly
into it. Common up the code that creates all the pipes - making them all
non-block on the read side in the process.
Call Job_CatchChildren() directly from Job_CatchOutput() so that it only
gets called when a child actually exits.
NB: Something causes a 'pregnant pause' if (for example) you call 'nbmake obj'
in src/tools. Introduced between netbsd 3 and 4.
Refer to vi manpage for option -r.
Mention rc.d start up script for this.
Add rc.conf to SEE ALSO.
Remove sentence about it originally done at boot time.
Fix date - it was added in 1996. And mention that the
script was renamed in 2001.
shell. To use this, build with -D_PATH_DEFSHELLDIR=\"/path/to/dir\"
-D_BASENAME_DEFSHELL=\"shell\".
* Change the order of entries in shells[]. Now DEFSHELL defaults to 0,
and shells[0] describes the default shell. This will be "sh" in the
usual case.
* If _BASENAME_DEFSHELL is defined, insert an additional entry above
"sh" in the shells[] array, making this new entry shells[0]. The
new entry is assumed to refer to an sh-compatible shell with a
non-standard name. (Tested using _PATH_DEFSHELLDIR="/usr/pkg/bin" and
_BASENAME_DEFSHELL="bash".)
* In the shells[] entry for "sh", test defined(MAKE_NATIVE) &&
defined(__NetBSD__) to decide whether we can use the "q" flag.
OK sjg, christos
messages whan make itself is suspended (ie by ^Z) before make actually
suspends, supress the messages during this sequence.
This means we don't care that they would be output after the suspend
and we can stop attempting to reap child status from withing the signal
handler (which doesn't work for recursive parallel makes).
The code simplification means that we can remove much of the code that
blocked signals - since the signal handlers (expect that for ^C and friends)
now do almost no work.
We had a (long) discussion about this in #NetBSD-code and the consensus was
that /tmp should always be sticky (+t), and as such it is safe to create
the temporary files for chpass(1) in there. We added a check to guarantee
this (and bail out otherwise) and now temporary files are created in /tmp,
not filling up /etc.
Thanks to rivo nurges et al.
I have commited a different version than in the PR, it lacks a license
but if it warrants one we can stick the TNF standard on it. It's just
a main() routine that calls revoke(2).
call - which makes the code completely impossibly to follow, call fflush()
and ferror() just prior to calling fclose().
This has the advantage of actually detecting the any write errors, since
the output is block bufferred and will typically not happen during fprintf()
but only during the fclose() - where it is difficult to report.
I also singlilarly refuse to add (void) casts to every printf call in the
system - since it almost never makes any sense to look at the return value
(unless you want to know how many bytes were actually writtem).
If there are any undead ones set a flag so we don't report the 'Child (pid)
not in table' message when they die - it is impossible to (portably) find
the childrens pids.
This happens when make is run as 'make -f- ... <<EOF' and the shell uses
a child of (what will be) make to write the data into a pipe.
1. needfree = 0, should have been *needfree = 0
2. this function will not work with sp == NULL, since KEY_NAME dereferences it.
3. the if (0) {
label:
}
code is disgusting.
Remove all the nasty and impossible code and fix 1.
Raise an error if an argument to 'install -d' exists as a non-directory,
as suggested by joerg@ (and acked by some developers on #netbsd-code).
With this change behavior is equal in this respect to FreeBSD and
DragonFly.
- Send each type of signal to its own handler.
- Only call JobFinish when a process exits, in particular don't 'fake up'
'exitstatus' for jobs being continued, nor call it for suspends.
- When a job is stopped, use an entire variable to remember the fact, so
we know we need to send a SIGCONT. Don't change any other state.
- In order to report '*** [job3] Suspended' before we suspend ourselves we
have to call waitpid() from the signal handler - where we don't want to
process job termination events. Save the exit status and process later.
The code now handles:
- jobs that suspend themselves
- jobs exiting while suspended
- jobs that don't actually suspend at all
Hoewever it still does printfs() from the signal handler, and I haven't yet
stopped it thrashing the signal mask.
less 381
Over three years ago the less maintainer said he'll add these fixes.
Nothing happened, so we do it ourselves.
Thanks for the report and the patch!
with a table that is malloced with 'maxJobs' entries.
Add a 'job_state' field to the Job type that exactly follows which of
the old lists the job was on (or not).
Change all the code that scanned the lists to scan the array.
No logic changes in this commit.
(Soon we'll no longer need to lock out signals for the changes to job
statuses that are done from signal handlers now that there is no linked list.)
for digital transfer mode, not enabled by default.
To use it: $ cdplay -a /dev/audio (otherwise /dev/sound will be used)
and type "digital" on the interactive mode.
Thank you very much Sergey, it's very useful.
Reviewed and ok by christos@.
1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).
1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).
2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.
3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.
4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.
5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.
6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:
mail -c "foo bar" christos
will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.
7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.
8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.
when files may have hard links to a a name that only differs by case
- change install to unconditionally remove its temporary file
when installing hard links with -r. This avoids problems when
built with posix rename(2) semantics and reinstalling an existing
hard link.
- rework hard link targets in bsd.man.mk and bsd.links.mk
to use makefile constructs instead of shell constructs
- always reinstall hard links that may have case conflicts, even
when MKUPDATE=yes, this ensures that they get added to METALOG
- remove man pages which were hard linked to themselves in libform
- remove improper hard link command for existing man page in libkrb5
- fix libl's makefile to include bsd.lib.mk at end
- remove shell quoting in link target for test's [.1 man page
Both available for IPv4 and IPv6.
Basic implementation test results are available at
http://netbsd-soc.sourceforge.net/projects/ecn/testresults.html.
Work sponsored by the Google Summer of Code project 2006.
Special thanks to Kentaro Kurahone, Allen Briggs and Matt Thomas for their
help, comments and support during the project.
for other program binaries.
Fixes build of 'config' where I added code (commented out) to use the CRC
function - but didn't comment out the #include :-(
If a default is specified then the option is always defined in the
corresponding .h file.
Particularly useful for parameters where the default action isn't the
same a defining the value zero, given that the current use of #if defined(opt)
is open to problems wehere the relevant .h file isn't actually included, so
requiring an option to always have a value makes sense.
Also included (but commented out) is code that adds a global symbol to
the object file to stop objects compiled with different values for the
same option being linked together - I'm not quite happy with it yet!
does is cause confusion when I try to add default values for defparam.
Also if malloc()/free() aren't efficient enough for us, we ought to fix
them rather than having local free list - so kill the local free lists.
with a build problem for sparc. The reason is that <dev/tc/sticio.h>
(yes, irrelevant for sparc...) wants NBPG declared, but for sparc user-land
that symbol is not available since sun4/sun4c/sun4m do not all share the
same page size.
Remove bthset(4) device and add btsco(4) in its place. This is an
improved version which is not just for headsets, as it can receive
incoming connections (eg for Hands Free Profile). Update bthset(1)
control utlitiy to relate to new device.
While touching all vptofh/fhtovp functions, get rid of VFS_MAXFIDSIZ,
version the getfh(2) syscall and explicitly pass the size available in
the filehandle from userland.
Discussed on tech-kern, with lots of help from yamt (thanks!).
sequencer API definitions in sys/midiio.h (so there is a use example).
These produce the same (ABI) sequencer events as the OSS macros, but in
a more strongly-typed way; OSS API macros could be built on them and added
to the OSS compatibility header sys/soundcard.h but have not been, yet.
TOOL_SED:
* Parameterise JOIN, MKTEMP, NM, SED, and SORT. Previously
only NM and MKTEMP were parameterised.
* Rewrite some duplicated code using a loop.
* More careful quoting of shell variables.
* `...` -> $(...)
NetBSD Foundation Membership still pending.) This stack was written by
Iain under sponsorship from Itronix Inc.
The stack includes support for rfcomm networking (networking via your
bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets.
Drivers for both PCMCIA and USB bluetooth controllers are included.
is busted in some way.
The TOOL_SED doesn't use TIOCGWINSIZE, and has some changes to include
nbtool_config.h in a cross build environment.
Combined with some other changes (not yet committed), this allows cross
compiling m68k code on Solaris 10/amd64.
mrg