(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
after various m_adj()s have been done. Kludge around this with a cheesy
macro that knows where the drivers put the mac header in the first mbuf.
XXX There should be a better way to do this.
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
and "pass-filter" and "inbound" and "outbound" qualifiers in the filter
expression, use new "active-filter-in", "active-filter-out", "pass-filter-in",
and "pass-filter-out" without these qualifiers.
This is necessary due to the horrible, awful way "inbound" and "outbound"
were specified for the filter programs when a packet was passed through them.
Basically, the "address" byte in the serial PPP header was overwritten with
a value to indicate the direction. However, the "address" byte doesn't even
exist on PPP headers for all other PPP encaps! So, this old method worked
only for serial encaps, and corrupted packets for all others (PPPoE, ATM, etc.)
to serial encap, change its data link type to DLT_PPP_SERIAL.
* Work around some serious bogosity in the filtering code which utterly
breaks proper functioning of BPF. The PPP code and pppd(8) WILL be changed
to fix this.
select the current medium, (and it is not autoselect), assume no change and
do not try to select the medium. Fixes 'ifconfig le0 medium 10base5' on sparc2
without requiring a 'do nothing' mediachange callback.
and netinet, currently only tested under netinet.
Disabled by default, enabled by compiling the kernel with option
IFA_STATS. Enabling this feature seems to make the ip_output function
take 13% longer than before, which should be OK for people that need
this feature.
- ETHER_ADDR_LEN: length of Ethernet address (actually, we already defined
this).
- ETHER_TYPE_LEN: length of the Ethernet header `type' field.
- ETHER_CRC_LEN: length of the Ethernet CRC (explorer got this already, mostly
because I forgot to commit these changes earlier).
- ETHER_HDR_LEN: total length of the Ethernet header
- ETHER_MAX_LEN: maximum length of an Ethernet frame, including header and CRC
- ETHER_MIN_LEN: minimum length of an Ethernet frame, including header and CRC
Define ETHERMTU and ETHERMIN (payload sizes) in terms of the above constants.
this fixed in the figures (but still not in the text); anyway, the intention
of the ATA is that this is identical to the PHDS specification.
Remove the ...EXC_8782 constant, and change the _EXC_1201 constant to be
a simple ...EXC.
above only; since this is the only occurence, fix it locally rather than in
<sys/cdefs.h> as to not remove all the functionality on pre-2.8 systems.
XXX Shouldn't use zero-length arrays at all.
After booting a current kernel and receiving a few arp requests on the
network it panics (data modified on free list). The panic message is wrong,
as code inspection shows the memory pool for routing entries is intialized
twice, while the routing timer memory pool is never initialized.
table. These are actually subtype+option combos, but these are the
strings displayed by the MII code to indicate 10Mbps full-duplex and
100Mbps full-duplex respectively, and it's Nice that ifconfig(8) can
grok them.
Our other constants also use "ATALK".
Added many new ETHERTYPE constants to sys/net/ethertypes.h, including the
ones from libpcap and tcpdump "ethertype.h" files.
fix last two fixes one more time, this time dealing with ugly
prototype issues, including the fact that the bcopy returns nothing,
but memcpy returns a void *. Never mind that we don't use it...
This was semi-nontrivial, since a function pointer to bcopy gets used
in this file.
Note #1: The catchpacket routine, which takes a function pointer to
bpf_mcpy or memcpy, should probably be converted to take a
flag that just says which is used, so memcpy can be inlined.
Note #2: The code is heavily #ifdef'ed to run on older operating
systems. We probably want to clean that cruft out, unless
someone is planning a new release of the code at LBL (doubtful.)
This allows pppoutput to be called from splimp (e.g., when ipflow is
in use.) without requiring pppasyncstart to run at splimp.
This is believed to fix PR5624.
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
the "header already complete" flag. This allows BPF writers to spoof
layer 2 source addresses (providing the layer 2 in use supports it) in
applications where this is necessary. From Greg Smith <greg@nas.nasa.gov>.
use the Ethernet source address speficied in the sockaddr rather than
the interface's Ethernet address, and then fall through to the AF_UNSPEC
case. From Greg Smith <greg@nas.nasa.gov>.
if_fddisubr.c to fastpath IP forwarding. If ip_forward successfully
forwards a packet, it will create a cache (ipflow) entry. ether_input
and fddi_input will first call ipflow_fastforward with the received
packet and if the packet passes enough tests, it will be forwarded (the
ttl is decremented and the cksum is adjusted incrementally).
change pfil_add_hook to put output filters at the tail of the queue,
while continuing to place input filters at the head of the queue. update
the two users of these functions, and document these changes.
fixes PR#4593.
the case mentioned in the PR was fixed as part of PR/2582. There was a similar
case though that was not handled as part of my initial fix, which was fixed
in FreeBSD. I applied the remaining part from FreeBSD and the code matches
now the FreeBSD respective version. [this probably should be pulled up for 1.3]
stripclose(). In strip_watchdog(), make abort if the line has been closed.
This fixes kern/4470 (Wolfgang Rupprecht), which was a bad pointer passed
to b_to_q() from strip_proberadio() called via strip_watchdog(); the tty
hadn't yet been attached to the strip interface.
- update copyright
- add their rcsid
- initialize some variables later later for consistency
with the current code.
- change char to u_char to match the current code.
- whitespace
- add rcsid; our sccsid is newer than the one on 1.2a1.
- change prototype to add mtu
- change size_t to u_int for consistency.
- add alignment stuff in bpf_movein
- add more consistency checks bpf_movein
- use one uiomove and then bcopy the data in bpf_movein
- update the comment for the panic when ifpromisc fails.
- separate the case when we have non blocking I/O and
no data and return EWOULDBLOCK
- check for other errors and return them
- pass the mtu to bpf_movein
- Add the BPF_KERN_FILTER junk, just so that we keep up with the code
- remove BIOCSRSIG, BIOCGRSIG; SIGIO does this well.
- don't add the SIOCGIFADDR stuff (it is bogus)
- Check for malloc return for consistency.
- comment should say poll
- change formatting to match the current code.
- save and restore the pcount and flags in case we fail to set the
interface into promiscuous mode.
- fix spelling typo.
of 8. Since structure padding on the m68k is 16 and on the arm is 32, we
rearrange the frmrinfo portion of the union not to contain a second structure.
Among other, add ARPHRD_ARCNET definition, make sure the hardware type is
set on outgoing ARP packets, make sure we dont send out replies as broadcasts.
Jonathan Stone and myself. Many thanks to Matt Thomas for providing
the information necessary to implement this interface, and for helping
to shake out the bugs.
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
in. Unfortunately, the BPF-only code called a label that wan't also
being #if'ed, and this made the compiler bitch. Now that we compile
with -Werror, this prevented the thing from compiling at all! (sigh)
"The mapping of IP Class D addresses to local addresses is
currently specified for the following types of networks:
[...]
o Any network that supports broadcast but not multicast,
addressing: all IP Class D addresses map to the local
broadcast address."
* Fix radio error-message parsing bug: old comparison against error
prefix string off by the size of the Starmode link-level protocol field.
* Fix radio reset finite state machine, given that parsing works properly.
* Add debugging messages about reset FSM if IFF_DEBUG is set.
* Remove #ifdefs notdef around back the check that discards newlines at
the beginning of a frame. Every error message from the radio has a newline,
as the radio send error messages terminated by \r\n, not just \r like data
frames. Not dropping the \n garbles the following data frame.
* Remove unused low-level debugging routines.
* Reformat the low-level bytestuff/RLL code to match the canonical source.
* Reduce MTU to 1100 bytes; 1200 bytes can overflow the radio buffers if the
bytestuff/RLL does poorly.
* Fix radio-probe string to _not_ include a frame delimiter (\r): sending
a \r to the radio tickles a bug in the firmware, causing the radio to
smash the next frame sent after the "**\r" probe string.
* Add calls to the tty t_oproc routine to make sure the probe and reset
strings get sent to the modem promptly, rather than waiting for the next
packet.
* Add PPP-style calls to the tty start-output function; seems to
reduce latency marginally.
still to do:
* Flush output queue if resetting, since the radio is going to drop
frames on the floor anyway if it needs resetting.
* Reduce tty start-output calls.
somehow got lost between NetBSD and Linux. Output side mbuf-walking
code now correctly bytestuffs mbuf chains, as well as single mbufs
and clusters.
* Update radio error-parsing code to Stuart's latest stable code.
We now parse error messages the older code didn't.
* Note where radio-crash watchdogs should be added (the linux code
is there, #ifdef'ed out). This still just doesn't work.
The radio reset doesn't always work even when slattatch is first started,
but I have a radio with old firmware, which may be a contributing factor.
* Correct the checks for the tty output queue being overfull; estimate
the stuffed pkt size as (original * 65/64) + STRIP_HDRLEN + 2,
instead of SLIP's (2*SLMTU). Re-enable the disabled check now the
size estimate isn't excessively large.
* Fix BPF tapping of strip interfaces, STRIP packets are wrapped
in a SLIP bpf header. This implies no BPF support for arp or atalk,
even though Linux boxes are sending arp requests and gratuitous arps.
There may be no good fix short of adding explicit STRIP encapsulation
support to bpf/tcpdump.
* Still need a solid walkthrough, and rewrite to eliminate redundant
receive-side mbuf copying.
- ability to be either a BROADCAST or POINTTOPOINT interface.
- a humble beginning of link-layer addressing (differs from PR
by using a `struct sockaddr' instead of single byte).
#define so that ifr_mtu accesses that. MTU shouldn't be overloaded
with ifr_metric, if only for clarity. Adding an MTU field to the
union hurts nothing (in fact, does not actually _change_ generated
code), and does improve clarity.
Unimplement PRU_ABORT, as it's not needed and wasn't correct.
Some stylistic cleanup.
Make sure the control mbufs are freed in all cases.
We must indirect through the higher-level protocol for
PRU_{BIND,CONNECT} so that it can check the sockaddr.
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_reset)()
to take a struct ifnet *, rather than a unit number.
sizeof(struct bpf_hdr). On machines that we currently support that
can use the old definition (which just covers the size of the data in
struct bpf_hdr), use it even though it's a hack. (This was changed
for the 'new architectures' case so as to be fail-safe; BPF may
waste a few bytes of space per captured packet on new architectures,
but now at least it's more likely to work.)
trivial multicast support, and support for xon/xoff output flow
control to the PPP subsystem. Fixed several bugs, including making
the accumulation and resetting of statistics more consistent. State
for the VJ compressor is now dynamically allocated.
* grok FIONBIO, FIOASYNC, and TIOC{G,S}PGRP
* add BIOC{G,S}RSIG; get/set the signal to be delivered
to the process or process group upon packet reception.
Defaults to SIGIO.
and for the PCI attachment of said chipset ("if_fpa"), also from Matt Thomas.
Arguably, pdq* doesn't belong in sys/dev/ic, but it's going to be shared by
various bus attachment devices at some point in the future, and there's no
other place that seems to fit as well.
improvements. The PPP kernel code is now split into if_ppp.c,
containing generic PPP support, and ppp_tty.c, which specifically
supports PPP on async tty devices (as a line discipline). This is
so that other devices can be supported without making them look
like ttys.
* Convert several data structures to use queue.h.
* Split in_pcbnotify() into two parts; one for notifying a specific PCB, and
one for notifying all PCBs for a particular foreign address.
* Convert several data structures to use queue.h.
* Split in_pcbnotify() into two parts; one for notifying a specific PCB, and
one for notifying all PCBs for a particular foreign address.
don't assume that tick is >= 1000; loses badly on alpha (div. by zero)
only try unaligned copies if NetBSD's UNALIGNED_ACCESS symbol is defined.
various misc type size cleanups, mostly short -> int16_t.
thorpej