ebcd1b7a41
Make sure to behave as IFF_SIMPLEX in all cases.
...
Drop multicast/broadcast packet looped back from myself.
This is to cope with SMC91C92 (Megahertz XJ10BT), which
loops back multicast packet to itself on promiscuous mode.
(should be ensured by chipset configuration)
Reviewed by: thorpej
1999-09-10 00:23:34 +00:00
d622281820
Rework the changer driver a bit:
...
- Take note of magazine changes, and enqueue "Element Status Changed" events
that user processes can read or select on.
- Normalize some structure names.
- Report back more status about changer elements:
* Volume tags (e.g. barcode labels on the backs of your tapes)
* External device names (for drive units in a changer)
* Last element a unit of media was moved from
* Sense information for SCSI changer elements in EXCEPT condition
* Vendor-specific data if the user requests it.
- Add support for setting volume tags.
1999-09-09 23:24:11 +00:00
b9627d002f
Add support for Cyclade boards with new Risc II serial controller.
...
Patches supplies by C Kane in PR kern/7175.
1999-09-09 21:52:11 +00:00
057798e505
Snapshot of work-in-progress to support the internal NWay block on
...
the Lite-On PNIC chips. Not finished yet; some other infrastructure
work left to do.
1999-09-09 21:48:18 +00:00
31292f422e
Add a quirk for Wangtec SCSI-36 (QIC-120) tape drive.
...
From Izumi Tsutsiu in PR 8357.
1999-09-09 20:06:52 +00:00
125de40b64
Ambicom support by Vincent Aymeric
1999-09-09 18:12:05 +00:00
a0cbbf08fe
Ambicom support by Vincent Aymeric
1999-09-09 18:09:10 +00:00
6b9aae738e
Update doc URLs and fix a typo in umass_bulk_get_max_lun().
1999-09-09 17:12:03 +00:00
9bebdb616f
Remove some and add some.
1999-09-09 13:05:05 +00:00
8c655e84f2
An EXPERIMENTAL audio driver. It still needs work, e.g., in the mixer
...
part to give reasonable names to the mixer controls.
1999-09-09 12:28:25 +00:00
2aadcb5f47
Change the internal API to allow DMA buffers to be pre-allocated by
...
the device driver instead of happening automagically in the HC driver.
This affects both the HC-USBD interface as well as the USBD-device
interface.
This change will allow DMA buffers to be reused e.g. in isochronous
traffic.
Add isochronous support to the UHCI driver (not for OHCI yet).
1999-09-09 12:26:43 +00:00
a85a08c2fb
Add support for detaching audio devices.
1999-09-09 10:24:39 +00:00
4efecd1291
The nca.c probe routine falsely claims i82595tx chips to itself.
...
Move it to after the iy driver.
1999-09-09 09:54:08 +00:00
633408472b
Use bus_dmamap_load() to obtain 128KB chunk for LANCE merging codes from
...
NetBSD/alpha. Tested ok with DEC3000 and DECstation.
1999-09-09 06:33:38 +00:00
a10045109d
Add chip types for several more Tulip clones (ASIX, ADMtex, PNIC II, Davicom),
...
and match the Compex RL100-ATX; it uses the Winbond 89C840F (RL100-TX is
a Macronix 98713).
1999-09-08 22:29:46 +00:00
e0c4f8ff92
Regen.
1999-09-08 22:25:56 +00:00
dfdd1affb4
Add some more Tulip clones.
1999-09-08 22:25:19 +00:00
ab08b6b863
Update for Lite-On product ID change.
1999-09-08 21:42:44 +00:00
ab7310ed6e
Regen.
1999-09-08 21:39:54 +00:00
9bb30be866
Add Davicom Semiconductor vendor ID, and Davicom DM9102 10/100 Etherent
...
product ID (Yet Another Tulip Clone).
1999-09-08 21:39:24 +00:00
187510560e
Regen.
1999-09-08 21:34:33 +00:00
46e11c9fd8
LITEON_PNIC -> LITEON_82C168
1999-09-08 21:33:59 +00:00
fe5b29ca42
Nuke unused prototype.
1999-09-08 02:01:55 +00:00
6913f83874
A useful discussion with Jason convinced me that I had selected the
...
wrong tag as the default tag to use- we should use ORDERED, no SIMPLE.
1999-09-07 22:54:45 +00:00
60feba0646
Spacing.
1999-09-07 21:52:06 +00:00
cc8ca41376
Install *reg.h
1999-09-07 21:51:49 +00:00
211476aea7
Match 1460 names with Adaptec.
1999-09-07 19:30:10 +00:00
5c44dfbe6a
Note 78Q2121.
1999-09-07 19:29:52 +00:00
977c927d44
Do a brain dump of items to do.
1999-09-07 14:58:12 +00:00
a4b7a96e0e
Do not complain in sbfind() if another driver has mapped the registers.
1999-09-07 00:49:41 +00:00
12bad24883
Add opl at wss for isapnp devices w/o MAD chip.
1999-09-06 18:31:45 +00:00
6e6d511cf0
Add USUBCLASS_MIDISTREAM definition, per request from MAEKAWA Masahide
...
<bishop@rr.iij4u.or.jp>.
1999-09-06 17:16:47 +00:00
ff962e992b
Add mode 3 support for newer CS423X chips. Modify probe to correctly
...
distinguish between CS4236, CS4236B, and CS4237B.
1999-09-06 17:07:04 +00:00
2425433ff6
Change some printf to DPRINTF for consistency. From Nick Hibma, FreeBSD.
1999-09-05 21:22:38 +00:00
24251055bc
Change the way the `struct device' base part of all driver softc are
...
declared and accessed to make it more portable. Idea from Nick Hibma, FreeBSD.
No functional changes.
1999-09-05 19:32:18 +00:00
83abb87d9a
Garbage collect more unused stuff.
1999-09-05 03:05:55 +00:00
9c01870db1
Remove more unused stuff.
1999-09-05 02:54:09 +00:00
cfbdda8843
Garbage collect some more stuff.
1999-09-05 02:24:58 +00:00
6158faa69d
Cleanup a bit more.
1999-09-05 01:58:11 +00:00
e57673d0d4
Remove one of the two bzero calls in RF_Calloc -- the 2nd one doesn't
...
buy us anything at all.
1999-09-05 01:46:35 +00:00
57f7d3320b
Add driver for the TDK Semiconductor 78Q2120 PHY.
1999-09-05 01:26:02 +00:00
e0bcd7a71a
TDK Semiconductor 78Q2120 PHY, commonly used in low-power Cardbus cards.
1999-09-05 00:48:01 +00:00
b8e941e9b0
Add PHY driver the the Intel 82553 found on some fxp's.
...
Some variants of this chip need a little extra MII fix before
being usable, so this is not yet put into GENERIC's.
1999-09-05 00:40:27 +00:00
0151ffe3d6
Regenerate.
1999-09-04 23:59:32 +00:00
6624cc41e9
Add Intel 82553 and TSC 78Q2120.
1999-09-04 23:58:55 +00:00
f3421bec94
Change the way the direction is extracted from the endpoint descriptor.
...
No functional changes to the drivers. From Nick Hibma, FreeBSD.
1999-09-04 22:26:11 +00:00
e1766aacfa
Make sure not to use the io handle before it's been initialized.
1999-09-04 22:00:32 +00:00
d8144e5848
More cleanup of unused stuff. This time we nuke a bunch of memory
...
allocation stuff.
1999-09-04 21:11:21 +00:00
cfd861fcd8
Minor cleanup of (now) unneeded RF_UTILITY checks.
1999-09-04 16:26:30 +00:00
56a01be374
Fix tyop in a comment.
1999-09-04 09:41:15 +00:00
6a2319b969
Byte swap the EEPROM words on the PNIC. From Stephen Ma.
1999-09-03 00:24:56 +00:00
8386184524
Deal with some more Winbond differences, after a more-thorough-than-before
...
reading of its manual.
1999-09-02 23:25:28 +00:00
533b6088cd
Make it compile.
1999-09-02 23:23:03 +00:00
d7a4829d27
Regen.
1999-09-02 22:07:43 +00:00
1fed6ca851
Add Logitech QuickCam.
1999-09-02 22:07:29 +00:00
ba551e0c6a
Regen.
1999-09-02 19:17:57 +00:00
f6ae3ac6a9
Add some Entrega and Belkin serial adapters.
1999-09-02 19:13:43 +00:00
60179e2a13
Avoid null reference, from Nick Hibma, FreeBSD.
1999-09-02 18:13:50 +00:00
46fd81350a
Rewrite interrupt routine from clarity. From Nick Hibma, FreeBSD.
1999-09-02 18:11:41 +00:00
9c10799ac4
Use the approximated sampling rate to compute the filter rate.
1999-09-02 17:26:15 +00:00
5c875f66d0
Select the right transceiver type when configuring the driver. Change the
...
timing for the mii code a bit. From Robert Elz / the FreeBSD xl driver.
1999-09-01 21:03:02 +00:00
cfbc8a82fb
Make Tulip-style filter setup interrupt-driven.
1999-09-01 20:56:15 +00:00
a6aa19699f
Don't assume that an -FX card has MII (because it doesn't).
1999-09-01 20:26:43 +00:00
e75ce8c0df
Don't attempt to do transmit threshold tuning on the Lite-On PNCI; just
...
put it in Store-and-Forward mode right from the get-go. This eliminates
the DMA underrun errors that prevented the receive filter setup from working
and caused smashed packets to go out onto the wire.
My NetGear FA310-TX board now works.
There are still "filter setup failed to complete" messages, however they
don't appear to indicate that the filter setup actually failed, since
unicast and multicast packet reception work fine. I will address this
problem shortly.
Reading the log for the FreeBSD `pn' driver suggests that these chips are,
in fact, pretty crappy, riddled with hardware bugs (for which more workarounds
are coming).
1999-09-01 20:11:19 +00:00
480e8a1a1c
No longer requires mpuvar.h.
1999-09-01 18:03:10 +00:00
ce80d27933
Don't try to unmap unmapped space in case of failure in
...
pciide_mapregs_compat(). From OpenBSD.
1999-09-01 15:17:07 +00:00
7c34574b94
add "ti" - Alteon Gigabit Ethernet
1999-09-01 11:54:32 +00:00
45e5d743af
quick 'n dirty port of FreeBSD's Alteon Gigabit Ethernet driver.
...
todo:
-IPv6
-clean up jumbo buffer allocation - NetBSD provides an opaque argument
to the free function, thus doesn't need the hack done here
-deal correctly with the mapping of the shared memory
1999-09-01 11:47:46 +00:00
7eaa4e57fd
regen
1999-09-01 11:42:32 +00:00
7c2d8bc001
-add some incarnations of the Alteon gigabit Ethernet adapter
...
-sort some entries which were put in by legasthenics
1999-09-01 11:40:42 +00:00
e5d76dce61
Don't make a human-readable device description being printed at attach time
...
depend on PCIVERBOSE.
1999-09-01 07:32:31 +00:00
5d7f25011b
Some of the Tulip clone chips (like the Winbond and ASIX) want the
...
IC bit set in the *first* descriptor of the outgoing packet. Appease
them.
1999-09-01 05:07:03 +00:00
e293024ffa
This is the long-awaited "new Tulip driver", a complete, from-scratch
...
rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety
of clones.
Currently, the driver supports the Winbond 89C840F (this works pretty
well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On
support may be broken [I may simply have a busted test board].
Eventually, support for the Macronix and ASIX chips will filter into
this driver, and then, slowly, support for the genuine DEC chips,
and maybe even the DE-425 EISA model.
1999-09-01 00:32:41 +00:00
78d4510ba0
Pass color value through ri->ri_devcmap before writing.
1999-08-31 10:11:52 +00:00
7c1c212662
If we are using UDMA mode > 2 and get a DMA error, downgrade to UDMA mode 2
...
first: maybe we incorrectly guessed the cable type.
1999-08-30 12:58:58 +00:00
8e49b58de0
Add support for Intel 810 chipset (ICH/ICH0).
...
While I'm there merge back piix_channel_map into piix_chip_map.
1999-08-30 12:49:21 +00:00
dea48ccdf9
Oops, back out stuff I didn't mean to commit.
1999-08-30 01:05:08 +00:00
a138de1eb5
Add detach goo; still needs work in the `scsibus' and further layers.
1999-08-30 01:04:31 +00:00
7a3bd0ab27
Add some missing request codes.
1999-08-29 22:45:41 +00:00
dd611fa302
Set openings to 1; only one command may be queued with the device at
...
a time.
1999-08-29 20:41:12 +00:00
54f6a91c01
Issue a Get Max Lun request to determine the max lun.
1999-08-29 19:58:55 +00:00
04cd1cc8ee
Make usbd_errstr() always return a useful error message; it's not like
...
the strings are that big.
1999-08-29 19:41:27 +00:00
d1088a5081
One more TODO item; sub-classes other than SCSI.
1999-08-29 18:58:03 +00:00
59e86c6637
Correct typo in URL. From Bill Sommerfeld.
1999-08-29 18:57:15 +00:00
f88e157ddb
Update the match routine to reflect that the driver actually matches
...
"Mass Storage/SCSI/Bulk".
1999-08-29 18:56:24 +00:00
e01cef341e
Update documentation references.
1999-08-29 18:13:26 +00:00
f91881f24a
Since we poll around the `done' member of a usbd_request, make it volatile.
1999-08-29 17:57:25 +00:00
cbd1c08a2c
Note a few TODO items.
1999-08-29 17:34:11 +00:00
52068f73ce
Add support for the Promise Ultra/33 and /66 pci IDE controller. In addition to
...
chip-dependant code this required the following changes:
- Instead of attaching the device in a generic way with some chip-dependant
routines, use a chip-dependant attach routine with some common code
factored out. The code is marginally bigger, but this allows the CMD64x
flag hack to go away.
- For chips that report per-channel 'irq triggered', test this before calling
wdcintr() for the native-pci irq case (compat intr can't be shared),
as wdcintr() has no good way to know if a irq was for it or not, and
ends up with irq loss. XXX for chips that don't have this feature irq sharing
will not work properly !
- add my copyrigth notice (could have been done some time ago I think :)
There are still some issues to be solved with the Promise controller and
ATAPI devices.
Many thanks to Paul Newhouse for shipping me 2 Ultra/33 boards for doing this
work.
1999-08-29 17:20:10 +00:00
4819ee1cf1
Add definitions of the DMA mode control registers. They should be used
...
by pciide, but I have yet to find how to map them.
1999-08-29 17:06:43 +00:00
246ab7936d
One item off this list done!
1999-08-29 16:53:04 +00:00
cbb4401dfd
Port the FreeBSD `umass' driver to NetBSD. This is still a work-in-progress
...
since a few things don't yet work properly:
- Sense data isn't reported properly (err, at all).
- It doesn't work with anything other than the Iomega USB Zip drive.
- Hot-unplug doesn't work yet.
...but this is enough to make my shiny new USB Zip drive go.
1999-08-29 00:30:08 +00:00
61f3c9356e
If scsipi_make_xs() fails, make sure to flag the buffer as error'd,
...
if provided, and biodone() it. Callers of scsipi_command() expect
this to be done.
1999-08-28 22:28:35 +00:00
036a9c6974
Change some 'struct device' to 'bdevice'. From FreeBSD.
1999-08-28 21:42:35 +00:00
1aa63c9fab
Add some comments.
1999-08-28 10:04:01 +00:00
103e304a84
Add to the growing list.
1999-08-28 10:03:38 +00:00
2126f7df24
Change a type name.
1999-08-28 10:01:59 +00:00
598999e482
Fix from FreeBSD.
1999-08-28 10:01:42 +00:00
e470b13e28
Regen.
1999-08-28 10:01:19 +00:00
4b398d8f1b
Fixes/updates from FreeBSD.
1999-08-28 10:00:56 +00:00
64c7328230
Regen.
1999-08-28 09:22:58 +00:00
d0fbee34df
Add a bunch of i810 devices. From Paul Shupak <paul@plectere.com>.
1999-08-28 09:18:08 +00:00
299c0b1d83
Regen.
1999-08-27 23:27:39 +00:00
e1b0108ce6
Add Samsung Semiconductor KS8920 10/100 Ethernet.
1999-08-27 23:25:36 +00:00
d8c7407afe
Factor out arc_storelladdr(), and use that instead of arc_ifattach() in
...
the bah_reset() function.
This makes the last change work without deconnecting all the other interfaces
from the interface list.
1999-08-27 19:23:19 +00:00
456af6d558
Reduce the number of transmit fragments to 16.
1999-08-27 19:21:32 +00:00
513feda9ab
- Include the RXE (receive error) interrupt in the interrupt enable mask,
...
and consider it to be like an RCC (receive copy complete). The RCC
code path has always checked for bad received packets.
- Trim the CRC length off the recived packet length; the EPIC/100 always
includes the CRC in the packet.
- Improve fatal error reporting.
1999-08-27 19:13:00 +00:00
43c0128089
Small consistency nit.
1999-08-26 22:44:29 +00:00
f2a165de01
Make monochrome attribte allocation a bit more obvious.
1999-08-26 21:48:11 +00:00
f0629e4b90
Change the way the default foreground and background colors are chosen:
...
require the front-end to initialize rc_deffgcolor and rc_defbgcolor (both
new members), and override these only if RASTERCONSOLE_{FG,BG}COL are
set in the kernel configuration file.
1999-08-26 20:48:09 +00:00
8679b79192
Only use ifp->if_addrlen after initializing it.\
...
Problem detected by Andreas Johansson.
1999-08-26 20:44:50 +00:00
f04bd56be1
Make `sc_ops->sdo_flush' synchronous. The flags `SDF_FLUSHING' and
...
`SDF_DIRTY' were never reset because `sddone' doesn't get called from
synchronous scsi commands.
1999-08-26 09:28:17 +00:00
387650fb8b
do not install these headers. they are large (~1.8M) and useless to userland.
1999-08-26 07:58:58 +00:00
94073f1fd9
One more ioctl() fix. Most of WSDISPLAYIO_xxx were never been called when
...
no wsmux device is installed.
1999-08-26 06:37:42 +00:00
b1615831d2
Nuke some unused code which, were it enabled, might be useful for
...
performance measurement, but which would cause data corruption.
1999-08-26 02:40:27 +00:00
65845c9e2a
Regen.
1999-08-25 23:23:33 +00:00
7529455612
Add a PS2 to Mac USB Adapter from P.I. Eng.
1999-08-25 23:23:17 +00:00
90b9deda72
When padding short packets on transmit, don't include the CRC length
...
in the computation. kern/8194.
1999-08-25 22:41:42 +00:00
6516d0b239
Fix an ioctl() problem. From nisimura@itc.aist-nara.ac.jp (Toru Nishimura).
1999-08-25 21:05:21 +00:00
e0e1fbbe36
Regen.
1999-08-25 20:34:56 +00:00
d6c3ef56b4
Guard pool_get()/pool_put() with splbio()/splx(). Fix kern/8245.
1999-08-25 17:08:20 +00:00
02a79dc13e
Add Multitech MT5634ZBA. From FreeBSD.
1999-08-25 16:28:12 +00:00
9a61ce5bff
When clearing the entire display, point to the start of the framebuffer,
...
not start of console output. Also, do not advance by ri_delta every row.
1999-08-25 08:45:25 +00:00
de9efb01d3
- Fix an error in cursor image manipulation. I learned a pair of Bt431
...
were populated in reverse order from PMAG-A MX ...
1999-08-25 07:56:22 +00:00
0bdb76e5cf
- 24bit per pixel TX framebuffer occupies 0x600000.
1999-08-25 02:02:22 +00:00
3844ce8324
Spelling.
1999-08-25 00:59:08 +00:00
aa550d38fb
Regenerate.
1999-08-24 21:32:25 +00:00
fa181849a2
Add Intel i740.
1999-08-24 21:32:04 +00:00
205c3f5a73
Regenerate.
1999-08-24 21:25:52 +00:00
82cb092b79
Fix typo in comment.
1999-08-24 21:25:22 +00:00
766b5fef17
Regen.
1999-08-24 17:48:31 +00:00
7a80808434
Add Allied Telesis LA-PCM (NE2000 compatible) and Contec C-NET(PC)C
...
(MB8696x based) pcmcia ethernet cards. Patches supplied by
Kawamoto Yosihisa in PR kern/8260 and kern/8261.
1999-08-24 17:47:44 +00:00
5cfe8783f9
Regen.
1999-08-24 12:47:20 +00:00
416c42cc34
Add AdLib MSC 32 Wave PnP board (wss audio device).
1999-08-24 12:46:55 +00:00
7f2b1ba8f2
- Change the semantics of rasops_init slightly
...
- Re-name rasops_setfont to rasops_reconfig
- Add some new run-time 'features'
- Bring all run-time 'features' under control of rasops_info::ri_flg
- Some cosmetic changes
1999-08-24 11:07:31 +00:00
1f2661798f
Make sure to mark the device as dying already in the (de)activate routine.
...
This avoids access to it before the detach routine has blown it away.
1999-08-23 22:55:14 +00:00
007da22e55
At attach time, get and print (parts of) the IEEE 1284 device id.
1999-08-23 22:35:19 +00:00
70020635c3
Regen.
1999-08-23 16:54:13 +00:00
c206e4ab37
Add a Kawatsu mouse.
1999-08-23 16:53:32 +00:00
65cfdf2877
Disable inclusion of debugging code by default.
...
Turn compile-time flag I82586_DEBUG into a boolean switch.
1999-08-23 12:12:42 +00:00
9fceb1947d
Do not report "spurious interrupts"; this is a relic of the PC-only
...
days of this driver.
1999-08-23 12:00:11 +00:00
592de98a19
Remove some unneeded needs-flag.
1999-08-23 07:07:47 +00:00
4c217fdaf8
Merge the soft_{td,ed} with the real {td,ed}. This saves time and space.
...
(And fix typo in corresponding uhci change.)
1999-08-22 23:41:00 +00:00
cc8b61583c
Merge the soft_{td,qh} with the real {td,qh}. This saves time and space.
1999-08-22 23:19:56 +00:00
be7e2fac07
More things to do...
1999-08-22 22:24:25 +00:00
1de0531d8b
Simplify ulptwrite() by calling usbd_bulk_transfer(). This also makes
...
it interruptible.
1999-08-22 22:22:43 +00:00
f747201099
Move more of the transfer completion processing to HC independent code.
...
Fix some problems with transfer abort & timeout.
1999-08-22 20:12:39 +00:00
5d8adfb5a2
Disable interrupts early.
1999-08-21 21:35:36 +00:00
a293a6cc73
Make sure not to call tsleep() from suspend/resume routine.
1999-08-20 16:42:38 +00:00
1705bbe96b
Get rid of ugly vertical bars which occurred when
...
character-cell boundaries != byte boundaries.
("width" (despite the poor name) should be computed based on the
*old* value of bg, not the *new* one.)
Fixes PR 8221.
1999-08-20 06:46:44 +00:00
be5fe633b8
clean up attach messages slightly.
1999-08-20 03:36:59 +00:00
f28eb7f5cc
make alpha compiler happy
1999-08-19 21:29:04 +00:00
0f99933822
Use the right type for the size argument when calling usbd_bulk_transfer().
1999-08-19 19:57:21 +00:00
a9563e089b
A first stab at making the UHCI driver endian independent.
...
(It doesn't seem to be quite working yet.)
1999-08-19 19:52:38 +00:00
c0f0486836
Add a utility function, usbd_errstr(), to print error strings. From FreeBSD.
1999-08-19 19:51:36 +00:00
462e2614ff
Add some mass storage definitions.
1999-08-19 19:50:42 +00:00
afb0c7b853
Make this compile. Patch from Simon Burge.
1999-08-19 11:20:34 +00:00
f625e72668
Regen.
1999-08-19 08:06:50 +00:00
93f86e5ed5
Recognize a 3Com 3c509 Combo configured in EISA mode. Fixes PR kern/8234
...
by Thomas Pfaff.
1999-08-19 08:06:31 +00:00
fd59bba7cb
after bus_dmamem creating some memory, zero it out. This has stopped
...
my alpha from getting COMMAND FAILED on random boots.
1999-08-19 00:43:45 +00:00
bf35d2940c
Add some more items.
1999-08-19 00:31:40 +00:00
1107c3f6ea
Back out last change. The ugliness of the Audio Class should not have
...
to pollute the general USB definitions.
1999-08-18 07:55:19 +00:00
7fb139742d
Update the endpoint descriptor struct with the two oddball entries
...
that only the Audio Class has.
1999-08-18 07:45:56 +00:00
54adf47f36
Redo the UHCI data toggle handling.
...
Make sure data toggles get synchronized on open and
when clearing an endpoint stall.
1999-08-17 20:59:04 +00:00
a47874ac23
correct a comment
1999-08-17 16:15:05 +00:00
3016e1ebe0
Make some small changes to make it compile on OpenBSD.
1999-08-17 16:06:20 +00:00
f61d8fd937
regen
1999-08-17 09:42:14 +00:00
c8aabedc83
-mention a location where the old PCI database can still be found
...
-add Alteon Gigabit Ethernet
1999-08-17 09:40:25 +00:00
e71ad5a0ac
The CCB already contains its DMA address, so no need to recompute it
...
over and over.
1999-08-17 02:09:47 +00:00
24f66ce158
Get rid of FreeBSD code; there was so little to share in this driver
...
that it should be split.
1999-08-16 23:36:25 +00:00
f7c5edea20
Mention mux # when ignoring it for the console.
1999-08-16 23:22:22 +00:00
03946f957a
Added Solidum Systems PCI vendor ID and Device IDs
1999-08-16 21:36:39 +00:00
9a0281ff87
Some new ioctl()s for the umodem driver.
1999-08-16 20:27:55 +00:00
aa7264892d
Implement a modem driver for the Abstract Control Model, i.e. AT commands.
...
It is accessible through the usual tty abstraction.
XXX The driver needs better error handling and a special call device.
XXX It also needs more testing.
1999-08-16 20:26:53 +00:00
290c03447b
Change the way transfers are dequeued so thet we know that they
...
are removed from the queue before being deallocated.
1999-08-16 20:24:33 +00:00
23fa3682af
Remove some, add some.
1999-08-16 20:21:09 +00:00
72b1f5a4b0
Add more CDC definitions.
1999-08-16 20:20:19 +00:00
7e4e93390d
Change DIAGNOSTIC behaviour a little.
1999-08-16 20:19:55 +00:00
df65083b45
A small roadmap of the USB files.
1999-08-16 20:18:07 +00:00
a01d72e890
Fix several LP64 problems, and clear up kernel pointer vs. physical
...
address confusion. This driver now works on the Alpha.
1999-08-16 02:01:11 +00:00
770de7bb5a
Print a error message instead of panicing in rf_RecoveryPQFunc().
1999-08-15 03:44:46 +00:00
d516e7b571
Make these compile with RF_INCLUDE_RAID6.
1999-08-15 02:36:40 +00:00
ff6d7dd494
Cleanup a bit.
1999-08-15 02:36:03 +00:00
07cc4855f1
Minor cleanup. No functional changes.
1999-08-14 23:34:18 +00:00
48f055e09b
Add missing MPU interrupt glue.
1999-08-14 22:42:16 +00:00
4ba14d22b0
Fix an 'off-by-one' error in a RF_ASSERT which meant that a reconstruct
...
would panic in the case where the stripe width was 1 block.
1999-08-14 21:44:24 +00:00
19570e813c
Implement opl at wss.
1999-08-14 21:19:29 +00:00
7b34e008a9
Forgot to initialize a pointer; from Simon Burge.
1999-08-14 15:05:02 +00:00
b8b1e35ece
Some changes from FreeBSD (no functional differences).
1999-08-14 14:49:31 +00:00
23906f1d41
defopt COMPAT_14
1999-08-14 14:40:08 +00:00
7317aa4924
make it report the correct ISA port range
1999-08-14 14:32:12 +00:00
b6c7adba38
Regen.
1999-08-14 13:43:27 +00:00
3622436247
Add support for 3Com 3CXEM556B-INT as suggested by Noriyuki KOIZUMI in
...
PR kern/8188.
1999-08-14 13:43:02 +00:00
6b7eee9252
Initialise "error" in wsmux_detach_sc() before testing if it set.
1999-08-14 11:40:31 +00:00
4882320d4b
Initialize error variable. Should fix spurious init errors.
...
From Dave Huang in PR 8205.
1999-08-14 11:23:39 +00:00
af827a1284
Remove dulicate "Ethernet" output. From Dave Huang in PR 8206
1999-08-14 11:09:18 +00:00
b23490d39f
Implement timeout and abort of requests.
...
Compute length of short transfers correctly.
1999-08-14 08:56:09 +00:00
740b9848cc
Decrease the number of outstanding IO's threashold slightly.
...
The previous value may have been too high in some instances.
1999-08-14 03:47:07 +00:00
6409e641a6
Remove a 'struct proc *'-passing abomination that's been bugging me
...
for quite some time.
1999-08-14 03:10:03 +00:00
4a058e82c5
Correct and/or improve detection of bogus row/column values
...
passed in via ioctls.
1999-08-14 02:41:36 +00:00
a7510095cc
Pass color index through ri_devcmap; don't assume that it already
...
matches the device's color map.
1999-08-13 09:45:46 +00:00
db2eaf18cf
rf_sys.h does not need to be #included in any of these files, and, actually,
...
is no longer needed at all.
1999-08-13 03:41:52 +00:00
1ec5208866
This file is no longer needed.
1999-08-13 03:31:20 +00:00
1aa6ce1041
Garbage collect rpcc().
1999-08-13 03:27:46 +00:00
02acd1910a
First kick at cleaning up the RF_ETIMER code. New timer handling code
...
provided by Peter Galbavy via OpenBSD.
1999-08-13 03:26:55 +00:00
eca431e87c
Nuke configuration of ETimer stuff during main configuration.
1999-08-13 03:25:01 +00:00
5cab826918
Clean up reconstruction accounting a bit. While it worked before, it was
...
slightly broken in the case where the RAID set did not support reconstruction.
1999-08-13 01:43:33 +00:00
59af828a94
Regen.
1999-08-12 09:43:18 +00:00
7c3cb9c796
Add Promise Ultra66, change entry of Ultra33 to reflect the fact that can
...
"only" do ultra/33.
1999-08-12 09:42:11 +00:00
ae6f518821
Garbage-collect CCDF_SWAP; no longer used, and doesn't make any sense
...
with the UVM swap code.
1999-08-11 02:44:35 +00:00
dd5ae858e0
We really only need *one* componenet buffer pool...
1999-08-11 02:41:02 +00:00
33e458640f
Garbage collect unused struct rf_test_acc.
1999-08-11 02:20:35 +00:00
31b98d3572
When reporting the status of a component during configuration,
...
provide more intuitive information about whether a component is clean
or not.
1999-08-10 22:56:20 +00:00
620eda50c7
Don't allow reconstructs, copybacks, or forced failures of components if
...
using a RAID 0, since RAID 0 can't handle those sorts of things.
1999-08-10 22:46:59 +00:00
0b08c839eb
Don't go ape if there is a problem verifying the parity. Note the condition
...
and inform the user (as opposed to panicing the system!).
1999-08-10 22:19:27 +00:00
49efd10006
Oops. Make minor change that I forgot when adding the parity check ioctl.
1999-08-10 21:41:37 +00:00
a3aefdaee3
Add support for easily checking the parity status from userland.
...
Also: spl protect rf_RewriteParity().
1999-08-10 18:18:30 +00:00
a531d8c31e
Trying to rebuild parity on a degraded set is bogus, so don't allow that.
...
Also, check sooner for a RAID 0 set, since rewriting parity makes no
sense there either.
1999-08-10 01:53:26 +00:00
26db0bba90
Garbage-collect C_INUSE and C_NEEDDONE.
1999-08-09 09:56:00 +00:00
5885dbb878
- use pool(9) for wdc_xfer, instead of managing a free list.
...
- fix printing of Ultra-DMA modes (shows up when the drive supports highther
modes than the controller).
- Don't use C_NEEDDONE anymore. We were setting this flag in a possibly
freed wdc_xfer (this didn't create problems, as it was free'd in the POLL
case only, while IRQs are blocked, but it's not good practice anyway
and pool(9) complains about it ;)
1999-08-09 09:55:18 +00:00
7eb1fae5d3
Add a missing 'return' in previous commit.
...
Don't use C_NEEDDONE anymore (it's safe to always call scsipi_done()).
1999-08-09 09:49:48 +00:00
7e874499c9
Don't call wddone() from _wdstart(), the ata_wdc system will do it now.
...
call wd_flushcache() with the proper flags (especially don't set
AT_WAIT | AT_POLL).
1999-08-09 09:48:04 +00:00
c0da6c9129
Don't use C_NEEDDONE, it's deprecated.
1999-08-09 09:43:11 +00:00
148c244c15
Driver for the DEC SGEC, Second Generation Ethernet Controller.
1999-08-08 11:41:28 +00:00
38de172f03
Add usbd_set_hub_feature() and usbd_clear_hub_feature().
1999-08-07 23:14:17 +00:00
d6331b4ef4
Some new items.
1999-08-07 15:05:46 +00:00
cdfc12a291
Make it possible to open wskbd devices for write (i.e. ioctl) even
...
if it is already open.
1999-08-07 15:04:35 +00:00
a8d8fc178f
Fix a typo.
1999-08-07 07:36:19 +00:00
ec368bb906
Fix a problem uncovered by attempting to compile on the Alpha: overrun_buf
...
was being initialized to a KVA, when we really wanted a DMA address. Change
the code to allocate the overrun buffer with the control blocks, and
properly initialize overrun_buf.
Note that overrun_buf cannot actually be shared between all boards; DMA safe
memory could vary from bus to bus.
Garbage-collect two functions which are no longer used because of the
above changes.
1999-08-07 07:20:15 +00:00
6b33521af9
Increase several timeouts to 30s.
1999-08-07 02:51:51 +00:00
fae9929734
- Add some debug printf (WDCPROBE) in _wdcreset_wait(), I've needed these
...
2 times in the past
- Set up timeout per xfer instead of per interrupt. This helps with
PIO transfer (we would call timeout()/untimout() several times for a
transfer).
- If we missed an interrupt for a PIO transfer, reset and restart it
immedialy, don't try to recover and continue. If we missed an interrupt we
may have lost a read/write cycle on the IDE bus. If this happens 1) we
corrupt data and 2) we enter an interrupt loop at the end of the xfer, as
the drive has some more data to read/write, but the host thinks the xfer is
done.
This last change fix the (or at last some of the) 'lookup after lost interrupt'
some peoples have been experiencing.
1999-08-06 12:00:23 +00:00
0ef6a875b8
regen for updated pcmciadevs
1999-08-06 06:39:57 +00:00
1780131e5c
add an entry for the IBM EtherJet Ethernet PC Card (cs8920 based)
1999-08-06 06:39:29 +00:00
03c29debf5
Make this file compile again.
1999-08-05 11:25:47 +00:00
191ab2b8e4
Since we have to go through fxp_init() to properly handle IFF_ALLMULTI
...
anyway, take advantage of this and greatly simplify the programming
of the multicast filter. This solves the last reported "device timeout"
problem with this driver.
1999-08-05 01:35:40 +00:00
439a6c4942
Add missing prototype for read_tekram_eeprom() to make driver compile if
...
"options NCR_TEKRAM_EEPROM" is specified in the kernel configuration file.
Patch supplied by Hans Hoppe in PR kern/8141.
1999-08-04 20:51:31 +00:00
d1ffb22ab2
"files" also needed.
1999-08-04 19:13:05 +00:00
1aa825ae03
Converted to (mostly) MI code.
1999-08-04 19:12:22 +00:00
7bff22bddc
Catch a console configuration error. Instead of jumping through cdevsw indexed
...
on major(NODEV), call panic...
1999-08-04 14:40:54 +00:00
fe98b81a44
Get the dependencies on NWSMUX right (I hope).
1999-08-04 11:26:04 +00:00
84d5e946e6
Use NMPU not NMIDI around call to mpu_intr.
1999-08-04 10:50:52 +00:00
c1c87dde4a
Add another file I forgot in my MPU changes.
1999-08-04 10:46:34 +00:00
cb6ed03a59
- Replace device node names of zskbd/zsms into lkkbd/vsms, respectively.
...
No functionality was changed at this moment.
- Apply recent changes in GENERIC to TCWSCONS.
1999-08-04 07:17:50 +00:00
5ea625fe90
Almost completely rewrite the receive logic, making it as close as possible
...
to the EPIC/100 driver's (adjusting for the fact that Intel Ethernet chips
are from Pluto):
* Don't allocate receive buffers until the interface is actually brought
up, and release all of them if the interface is taken down.
* Add a knob (defaults to off) which will copy an incoming packet to
a single header mbuf if it is small enough to fit in one, rather than
burning an entire cluster on it. Note that this change will be mostly
moot if/when sbcompress() is changed to handle compressing clusters.
Simplify some of the receive list logic:
* Rather than using a homegrown queue and additional software RX descriptors,
use an ifqueue to queue receive buffers, and M_{GET,SET}CTX() to hook DMA
maps and receive buffers together.
Clean up a bit:
* Macroize a bunch of things to make the code a bit easier to follow.
1999-08-04 05:21:18 +00:00
11e9392b3e
Only tick the MII if we are using it.
1999-08-04 00:17:28 +00:00
0ae14b58eb
Be a little less selective in the transmit interrupt path.
1999-08-04 00:14:08 +00:00
f1c6287a6e
Use the Interrupt bit in the command block to generate interrupts, rather
...
than interrupting after every Command Unit Not Active event.
1999-08-03 23:37:14 +00:00
1051ab605d
G/c a flag.
1999-08-03 23:18:32 +00:00
5c2b83a0ad
Don't bother with interrupt-driven multicast setup.
1999-08-03 23:18:09 +00:00
3012cf91af
Completely rewrite the transmit logic, making it look more like the
...
EPIC/100 driver's. Also, fix the "all multicast" logic. Also do some
general cleanup.
1999-08-03 22:43:28 +00:00
e0c8203cb3
Nuke unused #define.
1999-08-03 22:07:39 +00:00
f04cb4036f
move common support functions for phy drivers from mii.c to mii_physubr.c,
...
so that they are not includes if no PHY is configured
(avoids code bloat if an interface driver has the "mii" attribute but
mii is not used by the particular version)
1999-08-03 19:41:49 +00:00
4bd8f1566c
Be a little nicer about memory usage:
...
* Don't allocate receive buffers until the interface is actually brought
up, and release all of them if the interface is taken down.
* Add a knob (defaults to off) which will copy an incoming packet to
a single header mbuf if it is small enough to fit in one, rather than
burning an entire cluster on it. Note that this change will be mostly
moot if/when sbcompress() it changed to handle compressing clusters.
1999-08-03 17:25:51 +00:00
dbb71e4b35
Add the file I forgot at the previous MPU changes.
1999-08-03 00:27:27 +00:00
208dad78d1
Get data toggle right for short bulk transfers.
...
(XXX This code needs to be rewritten.)
1999-08-02 23:35:55 +00:00
caffcd4895
Another debug message.
1999-08-02 19:49:50 +00:00
2d4d29a1fa
Test return values the right way.
1999-08-02 19:36:48 +00:00
094852eb36
Change it so that a pipe can be open RW instead of just R or W.
...
This makes close() work properly, but it is still not ideal. Perhaps
there should be different device nodes for input and output on to
and endpoint with the same number?
Pay attention to the SHORT_XFER_OK ioctl().
1999-08-02 19:32:56 +00:00
d2db832909
Do abort of transfers in a sane way. Fixes PR 8041.
1999-08-02 19:30:34 +00:00
42fb510148
Move the mpu device declaration to conf/files.
...
Let the mpu device attach at the sb device, and then midi at the mpu.
Update the mpu at eso attachment.
1999-08-02 17:37:41 +00:00
9ab80b75b8
- Fix MX framebuffer size which should occupy 2MB in address range.
...
- Restore 72Hz interrupt service mistakenly ruined in the previous commit.
1999-08-02 06:00:40 +00:00
e78e58a7b8
- Fix TX 8bpp framebuffer size, which occupies 2MB.
...
- Rework CX RAMDAC register access like as other TC framebuffers.
1999-08-02 04:19:03 +00:00
f7141a0ffb
The Tadpole 3GX uses a modified Sun Mouse protocol. Instead of
...
sending 5 bytes per sample, it sends 3 omitting the 2nd set of
dx/dy updates. You can distinguish between the two forms since
the first byte of 5-bytes seq will be 0b10000xxx which a 3-byte
will have 0b10001xxx. This changes allows the Xsun server to
run unchanged on the Tadpole 3GX (ignoring for now that the
colormap is still broken).
1999-08-02 01:50:27 +00:00
825e233d2e
Allow the mouse baud rate to be patched (rather than forcing a recompilation
...
of the kernel). Also, if the mouse baud rate is 0, say the mouse the isn't
there (so a terminal may be attached in its place). Make debugging mouse
problems much easier.
1999-08-02 01:44:22 +00:00
cbf1f6f1b9
Move the MPU driver isa/ to ic/.
...
(I didn't move it in the repository because the revision history
is very short and uninteresting. :)
1999-08-01 18:05:39 +00:00
0c0dc211d4
Make an MPU attachment to ISA. Used for old Roland cards. Written
...
by me and gson@araneus.fi (Andreas Gustafsson).
1999-08-01 17:53:39 +00:00
6ca9b225e7
Add a timeout-routine that checks if transmit logic dies, and reset it
...
in that case. This is not uncommon when the interface is heavy loaded.
1999-08-01 15:25:41 +00:00
ba922d31d8
Re-work the Tx side to avoid calling into the tty layer at
...
interrupt time. This was the cause of the 'mmu fault' panics
seen by several people, as the Tx interrupt is at a higher
priority that spltty().
1999-08-01 09:35:05 +00:00
9baa857f5b
Regen.
1999-08-01 08:32:48 +00:00
9657de4af2
Add an entry for the TI PCI1211 PCI-CardBus Bridge.
...
From the cardbus patches.
1999-08-01 08:32:08 +00:00
b6b44d6809
Eliminate the need for needs-count for wsmux. This should make
...
wsdisplays work properly again.
1999-07-30 20:52:27 +00:00
fff1639c50
GRR! Kludge around the extremely annoying wsmux configuration lossage
...
by removing the "| wsdisplay" from the wsmux.c file declaration. This
will cause any kernel which includes wsdisplay but not wsmux explicitly
to fail to link, but at least those of us with multiple wsdisplays on
a single machine can build kernels again.
1999-07-30 20:42:16 +00:00
c03616646c
- Fix TX 66Hz interrupt handling. Verified ok with PMAG-JA as an 8bpp
...
console. XXX troubles in cursor color.
- Typo in comments of MX.
1999-07-30 16:23:43 +00:00
2917356cae
Guard tsleep() with a while (!(wdc_c->flags & AT_DONE)) {}, as suggested by
...
Constantine Sapuntzakis confirmed by Bill Sommerfeld. Although nothing is
supposed to call wakeup on this without setting AT_DONE, it's good practice to
do it this way (the process may be waken up by a setrunnable() call).
1999-07-30 14:59:10 +00:00
09e76a1645
Remove two items that are done.
1999-07-30 11:40:19 +00:00
76dcbfad36
Regen.
1999-07-29 20:58:19 +00:00
8548b384f5
Add some Initio SCSI controller IDs.
1999-07-29 20:56:55 +00:00
3d3f77c49e
Add the wsmux pseudo device.
1999-07-29 18:20:02 +00:00
a81c366fed
Bump MAX_START to 256, so that the ncr driver can work with more than 5
...
devices on the same bus. See PR kern/6347 for details.
1999-07-29 10:00:34 +00:00
7220690fb8
Regen.
1999-07-28 22:38:00 +00:00
4341d92cb3
Correct Acard device names.
...
Add and update a few IBM devices.
Add Toshiba and NEC devices in Portege 3K's.
1999-07-28 22:36:10 +00:00
36e00c28de
fix the previous fix
1999-07-28 10:03:02 +00:00
fb4ecab492
make these compile again s/#endif/#else/
...
again, it is impossible for me to make sure that they work.
1999-07-28 06:35:06 +00:00
0a1820a4e7
regen
1999-07-27 17:55:00 +00:00
424a28aa79
Add vendor ID for Geocast
1999-07-27 17:52:59 +00:00
d6c9ec0a2e
Make this "should work" on big endian systems.
1999-07-27 00:55:34 +00:00
b73b84643f
Add support for the SMC 83c175. Also, print out the chip rev when
...
we attach.
1999-07-27 00:37:34 +00:00
f48807a678
Regen.
1999-07-27 00:24:06 +00:00
b5dc3f5708
Add product ID for the SMC 83c175 Fast Ethernet chip. This is a cousin
...
of the SMC 83c170 which also supports CardBus.
1999-07-27 00:23:47 +00:00
8fa3d8be55
make the JVC 2626 match more than one version, since all seem to be
...
returning errors on the LUN probe.
1999-07-26 22:43:13 +00:00
e6216650d8
Use unsigned integer to hold font bits in putchar(). [This looks like the
...
source of glyph corruption].
1999-07-25 17:36:40 +00:00
4047458551
More DIAGNOSTIC messages.
1999-07-24 01:40:19 +00:00
f6bf685b94
Regen.
1999-07-22 20:58:18 +00:00
baf7e04902
Insert a space in New Media Corporation. Fixes kern/7817 by Lloyd Parkes.
1999-07-22 20:56:38 +00:00
40d9e23179
Define the Volume Tag format.
1999-07-22 17:43:53 +00:00
a41907cbf8
- Style nits
...
- Kill some of the dainbramage in variable-depth copycols()
1999-07-21 19:19:03 +00:00
5cef006d40
Need to splbio()/splx() protect some of the reconstruction stuff.
...
Without this, we have potentially bad interatctions with the pool
code.
1999-07-21 03:15:26 +00:00
963921febe
regen
1999-07-20 20:59:03 +00:00
62adeef8f6
add TI TVP4020 Permedia 2
1999-07-20 20:58:20 +00:00
29664a379a
The options actually used are RASTERCONSOLE_{FG,BG}COL, not
...
RASTERCONS_{FG,BG}COL. defopt the rigth ones.
1999-07-20 18:05:15 +00:00
ce7cb7114d
rf_UnconfigureVnodes() needs to be called in the DO_RAID_FAIL macro.
1999-07-19 01:36:07 +00:00
0c7600ca4e
sectorsPerStripeUnit should be larger than 0. If it isn't, simply fail.
...
(Thanks to Thor Lancelot Simon for noting the problem).
1999-07-19 01:35:19 +00:00
5122ae5f44
Recognize 3c905C.
1999-07-15 18:10:29 +00:00
4dae830922
Regen.
1999-07-15 18:06:39 +00:00
4495d8362a
product 3COM 3C905CTX 0x9200
1999-07-15 18:02:08 +00:00
50eef750e4
Regen.
1999-07-15 14:53:13 +00:00
8a5bb754c7
Add Cinemaster C 3.0 DVD Decoder.
1999-07-15 14:52:48 +00:00
5d94c1dc69
Clarify that the empty string, not the string ANY, as the network name means
...
pick any access point
1999-07-15 14:31:52 +00:00
e314d1d844
Correct the sense of the PCR_FLINK100 bit. From Dave Sainty, PR #7832 .
1999-07-14 23:57:36 +00:00
48f2389776
Add shutdown hook to turn off card.
...
Fix BPF tap code.
1999-07-14 23:07:29 +00:00
76b2d00f39
Regen.
1999-07-14 23:03:09 +00:00
a641b41593
Add/change a few Adaptec controller IDs.
1999-07-14 23:02:01 +00:00
62af9404e6
Skip LUN check for all versions of the UMAX Astra 1220S as suggested
...
by Dan McMahill in PR kern/7991.
1999-07-14 22:34:18 +00:00
5d33b8fc14
Install a header needed by userspace wiconfig program
1999-07-14 22:32:05 +00:00
52faa3e2d7
Blitz port of the FreeBSD wi* driver for the Lucent WaveLan IEEE
...
PCMCIA wireless LAN.
Original driver written by Bill Paul <wpaul@ctr.columbia.edu>
1999-07-14 22:24:07 +00:00
313081da93
Add a few 802.11 cards
1999-07-14 22:13:27 +00:00
021319d9b3
Avoid crashing if we are forced to close() before teh open() completed
...
(can happen on disconnect, probably due do dubious logic in vdevgone()).
1999-07-14 19:12:07 +00:00
e859716a79
Unused in MI code.
1999-07-12 19:47:40 +00:00
cf917747a1
Add a driver for the ESS Technology Solo-1 PCI AudioDrive line of chips.
1999-07-12 15:13:30 +00:00
7d8abaa49e
Regen.
1999-07-12 15:04:41 +00:00
ecbc7c6afd
Change the ESS Solo-1 description string to match the data sheet.
1999-07-12 15:02:46 +00:00
0612a1ddef
Fix typo in a printf, from Soren S. Jorvan.
1999-07-12 13:49:38 +00:00
497378ce6d
Copied from ../../arch/vax/bi/uba_bi.c,v
1999-07-12 13:43:40 +00:00
af86c7da93
Copied from ../../arch/vax/bi/kdbreg.h,v
1999-07-12 13:43:24 +00:00
f5e891549d
Copied from ../../arch/vax/bi/kdb.c,v
1999-07-12 13:43:11 +00:00
fa113488d5
Copied from ../../arch/vax/bi/bivar.h,v
1999-07-12 13:42:55 +00:00
3b01a5972f
Copied from ../../arch/vax/bi/bireg.h,v
1999-07-12 13:42:42 +00:00
f6e8b1b918
Copied from ../../arch/vax/bi/bi.c,v
1999-07-12 13:42:24 +00:00
361422bc96
Apply some bulk transfer bug fixes from FreeBSD.
1999-07-12 05:22:50 +00:00
54b747eb16
In pcmcia_pars_cis_tuple(): in the PCMCIA_TPCE_FS_MEMSPACE_TABLE case
...
there is one more memspace in the table then the PCMCIA_TPCE_MS_COUNT
mask produces.
1999-07-11 00:34:37 +00:00
c95ed3d2e5
In pcmcia_print_cis(): When printing io and mem spaces don't append trailing
...
0s if length or hostaddr are zero, instead DTRT.
1999-07-11 00:26:29 +00:00
2422638ad5
Fix a buglet in the driver's DMA buffer list ipmlementation, causing the next-
...
in-list (wrong) descriptor structure of the buffer in question to be freed.
1999-07-10 16:46:19 +00:00
e5d15c0dc6
Add another CD to the quirk table.
1999-07-08 14:24:42 +00:00
324c76b3d9
Once upon a time, long long ago, there was a "fix" added to the
...
RAIDframe driver to stop it from eating too much kernel memory when
writing data. But that fix had a nasty side-affect of hurting write
performance (*much* more than I thought it would). These changes nuke
that "fix", and instead put in a more reasonable mechanism for limiting
the number of simultaneous IO's which can be happening for each RAID device.
The result is a noticeable improvement in write throughput. The End.
1999-07-08 00:45:23 +00:00
5f1ede624f
Make the kthread API a bit friendlier to loadable kernel modules.
1999-07-06 21:51:22 +00:00
7b3258b6a7
Make the kthread API a bit more friendly to loadable kernel modules.
1999-07-06 21:44:09 +00:00
7875415701
Add the detach and activate entry points to the cfattach struct.
1999-07-06 07:42:23 +00:00
319c42848d
Add some sanity checks.
1999-07-06 07:12:03 +00:00
c9d36d5b4c
add in (controlled by option) 2200 Expanded Lun F/W
1999-07-06 05:43:51 +00:00
8fc3744ddd
Upgrade 2100 F/W and add 2200 f/w.
1999-07-05 20:33:58 +00:00
f428cf36fa
Change to approved NASA/Ames copyright. Add Fabric support. Fix SCCLUN support.
...
Add code that tries to track LoopID shifting.
1999-07-05 20:31:35 +00:00
3bb408eb05
Change to approved NASA/Ames copyright. Add in Qlogic 2200 support.
1999-07-05 20:28:11 +00:00
636e8f4688
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 05:55:23 +00:00
111e8a47c4
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37).
...
This means that all SIIG PCI serial/parallel cards (described on their
web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 05:38:05 +00:00
f3a6841709
make it compile if WSDISPLAY_COMPAT_RAWKBD is defined, but NWSDISPLAY not,
...
reported by Kazushi Marukawa <jam@pobox.com>
1999-07-01 11:18:20 +00:00
118d2b1d4f
IPv6 kernel code, based on KAME/NetBSD 1.4, SNAP kit 19990628.
...
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
1999-07-01 08:12:45 +00:00
6d864c0914
add driver for the Bit3 PCI-VME adapter, without the DMA parts for now
1999-06-30 17:45:38 +00:00
3a845702d7
A reference to http://members.hyperlink.net.au/~chart/pci.htm in comments;
...
this new effort at collecting PCI data outside the PCI SIG replaces the
one that was referenced in here before.
No regeneration required.
1999-06-30 16:52:52 +00:00
83eb712e3c
update for new VME framework
1999-06-30 15:07:45 +00:00
44418fdf70
new, more mi, VME framework
1999-06-30 15:06:05 +00:00
itojun