Commit Graph

564 Commits

Author SHA1 Message Date
simonb 450dc64ed8 Remove some routing specific sysctl function declarations from
<sys/sysctl.h> and make them static in net/rtsock.c.
2000-04-15 17:51:27 +00:00
itojun c24f5b5068 add more IPv6 cases. not tested.
TODO: IPv6CP support.  currently IPv6 packet will be generated right
after link up (spec violation)
2000-04-12 10:51:15 +00:00
itojun ecb5f2e56a revisit in6_ifattach().
- be persistent on initializing interfaces, even if there's manually-
  assigned linklocal, multicast/whatever initialization is necessary.
- do not cache mac addr in the kernel.  grab mac addr from existing cards
  (this is important when you swap ethernet cards back and forth)
now ppp6 works just fine!

call in6_ifattach() on ATM PVC interface to assign link-local, using
hardware MAC address as seed.

(the change is in sync with kame tree).
2000-04-12 10:36:38 +00:00
chs 6040f9fa38 remove sunos stuff. 2000-04-12 04:21:22 +00:00
chs b9c0393d3f remove support for sunos and ancient BSDs. 2000-04-12 04:20:47 +00:00
augustss c1ebd1929a Kill some more register declarations. 2000-03-30 09:45:33 +00:00
simonb 76e291abe4 Delete redundant decls of if_slowtimo and if_null{output,input,start,
ioctl,reset,watchdog,drain} - they're in <net/if.h>.
2000-03-30 02:31:59 +00:00
enami 78d601b7d4 Fix typo in comment. 2000-03-29 04:56:47 +00:00
simonb 0fd09c8496 Don't need to include <sys/conf.h> here. 2000-03-29 03:43:33 +00:00
simonb fe30fe7adf Extern etherbroadcastaddr, ether_ipmulticast_min and ether_ipmulticast_max. 2000-03-29 03:36:32 +00:00
simonb 25b33c13f4 Extern the declarations of ifindex2ifnet and if_index. 2000-03-29 03:27:59 +00:00
thorpej fc96443d15 New callout mechanism with two major improvements over the old
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
  resource allocation.
- Insertion and removal of callouts is constant time, important as
  this facility is used quite a lot in the kernel.

The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 07:01:25 +00:00
itojun d4eed1a6bf remove bogus comment 2000-03-22 16:51:03 +00:00
itojun c23a76689e remove if_withname, which was merged in by mistake during KAME merge. 2000-03-22 11:34:15 +00:00
itojun 5f74312bd0 beautify 2000-03-22 11:24:59 +00:00
soren 95054da1a1 Fix doubled 'the's in comments. 2000-03-13 23:52:25 +00:00
itojun dcec402dc9 initialize rn with 0, just to be sure 2000-03-12 11:58:15 +00:00
itojun 8937ddef33 do not touch radix_node with RNF_ROOT on route_output(). this can
cause kernel panic (by non-root invocation of route(8)) on certain
routing table setup.
KAME PR: 217
2000-03-10 14:47:12 +00:00
onoe 85656424da Rename the macro IEEE80211_FC1_RCVFROM_XXX to IEEE80211_FC1_DIR_XXX
and fix the value to be consistent with IEEE 802.11 spec.
The only customer of this macro is if_ray driver for now.
2000-03-10 05:44:23 +00:00
thorpej 57aae5ce02 On second thought, only set a default baudrate for "ethernet" if one
isn't set already.
2000-03-06 21:03:46 +00:00
thorpej b99cf790df - Initialize ifp->if_baudrate to a sensible value when the interface is
attached.
- Add ether_crc32_be() and ether_crc_le(), common functions for computing
  the Ethernet CRC on arbitrary length buffers.  Nothing uses them yet,
  and these should be double-checked and probably re-implemented as
  table-driven functions.
2000-03-06 20:54:41 +00:00
thorpej c2c2f491bc Use the new macros in if.h for setting ifp->if_baudrate. 2000-03-06 20:52:12 +00:00
thorpej 7e0978a583 Initialize ifp->if_baudrate to a sensible value when the interface is
attached.  XXX Need to double-check this one.
2000-03-06 20:51:27 +00:00
thorpej 877704d33e Add ifmedia_baudrate(), which returns a value suitable for ifi_baudrate
given a media word, or 0 for unknown.
2000-03-06 20:50:29 +00:00
thorpej 0f5c059d1f - Add link status to if_data, so that routing daemons and other interested
parties can easily know the state of a link.
- Define an interface announcement message for the routing socket so that
  routing daemons and other interested parties know when an interface
  is attached/detached.
2000-03-06 20:49:00 +00:00
kleink 5d617390f9 Make pre-1.5 compatibility structures being defined conditional on _KERNEL
as well.
2000-03-06 18:55:10 +00:00
soren a4a133213f Add empty token_ifdetach(). 2000-02-27 03:04:09 +00:00
mycroft 6ac2d6c797 For pfil_add_hook(..., PFIL_ALL, ...), if we fail to add the output filter,
make sure to remove the input filter.
2000-02-23 02:35:42 +00:00
darrenr fdf401f582 only call pfil_list_add with one of PFIL_IN or PFIL_OUT defined 2000-02-22 11:30:22 +00:00
darrenr 81069f7a58 return int from pfil_add_hook and pfil_remove_hook to indicate failure
or success, rather than panic'ing
2000-02-22 10:45:47 +00:00
darrenr 4da6dd2324 fix from Mike Pelley to add filters in the reverse order for output
compared with input.
2000-02-22 10:18:49 +00:00
erh 6ac8255360 This is a fragment of the network soft interrupt routine in MD code. DONETISR should be defined to do the appropriate thing for each port before including this. This file is to keep the available NETISRs the same across all ports. 2000-02-21 20:36:14 +00:00
erh fa88d200cf Remove NETISR_IMP. Make NETISR_ARP == AF_ARP, renumber NETISR_PPP to allow this. 2000-02-21 20:31:02 +00:00
darrenr 4b3916780b pass "struct pfil_head *" to pfil_add_hook and pfil_remove hook rather
than "struct protosw *".
2000-02-20 00:56:33 +00:00
sommerfeld a00eb27e1a More 802.11 subtypes: there's also 1MB/s DS
(the BayStack 660 firmware claims to support it).
2000-02-17 21:53:16 +00:00
darrenr fd7edad6c3 Change the use of pfil hooks. There is no longer a single list of all
pfil information, instead, struct protosw now contains a structure
which caontains list heads, etc.  The per-protosw pfil struct is passed
to pfil_hook_get(), along with an in/out flag to get the head of the
relevant filter list.  This has been done for only IPv4 and IPv6, at
present, with these patches only enabling filtering for IPPROTO_IP and
IPPROTO_IPV6, although it is possible to have tcp/udp, etc, dedicated
filters now also.  The ipfilter code has been updated to only filter
IPv4 packets - next major release of ipfilter is required for ipv6.
2000-02-17 10:59:32 +00:00
itojun de10c7425e backout incomplete hack from KAME codebase (originally from bbn).
the hack tries to respect ifa or ifp passed to RTM_ADD.  However, the change
broke certain link-layers.  They include:
- midway ethernet card (en*), which uses sockaddr_dl in gateway portion
  to pass PVC information.  with the patch, the gateway portion will be
  overwritten by empty sockaddr_dl and PVC initialization will fail.
- IPv6, which can't set static ND table with the patch (ndp -s), for the
  similar reason as above.

There may be improved hack coming soon, hope the new one does not break others.
2000-02-17 04:28:00 +00:00
thorpej d87b838524 Fix TMASK to use all 5 lower bits of the media word, and add HomePNA 1.0. 2000-02-16 18:03:14 +00:00
itojun 5d257be455 make assumption in rt_msg1 (len <= MHLEN + MLEN) explicit.
panic if not satisfied.
2000-02-11 06:11:03 +00:00
itojun 541b446bfa for more strict rfc2367 conformance, move netkey/keyv2.h into net/pfkeyv2.h
(net/pfkeyv2.h used to just include netkey/keyv2.h).

netkey/keyv2.h includes #error only for several days, to inform
of file path change.  after that I plan to nuke the file.
2000-02-09 03:27:29 +00:00
thorpej 72ecabeb4d In if_detach(), call PRU_PURGEIF for *every* protocol within a domain
that has a usrreq entry point.  Each protocol may have its own PCB
tables that need to be purged of references to the interface.
2000-02-06 16:43:33 +00:00
itojun 90736ab608 fix include pathname for better rfc2292 compliance. 2000-02-06 12:49:37 +00:00
itojun 1f8497dc18 fix route cleanup on interface removal. (not sure why -Wall did not catch it) 2000-02-05 07:58:54 +00:00
thorpej c1185c1020 PRU_PURGEADDR -> PRU_PURGEIF, per a discussion w/ itojun. In the IPv4
and IPv6 code, also use this to traverse PCB tables, looking for cached
routes referencing the dying ifnet, forcing them to be refreshed.
2000-02-02 23:28:08 +00:00
thorpej 99f19b7139 Wrap a debugging printf in IFAREF_DEBUG. 2000-02-02 18:02:08 +00:00
enami 9cb8699ba1 Revoke bpf device on detach. 2000-02-02 09:03:41 +00:00
enami 983b6de129 Since we are allowed to wait, no need to check the return value. 2000-02-02 08:36:02 +00:00
enami 19bff8f913 Remove duplicated forward declarations. 2000-02-02 07:45:13 +00:00
thorpej d844a3ac41 First-draft if_detach() implementation, originally from Bill Studnemund,
although this version has been changed somewhat:
- reference counting on ifaddrs isn't as complete as Bill's original
  work was.  This is hard to get right, and we should attack one
  protocol at a time.
- This doesn't do reference counting or dynamic allocation of ifnets yet.
- This version introduces a new PRU -- PRU_PURGEADDR, which is used to
  purge an ifaddr from a protocol.  The old method Bill used didn't work
  on all protocols, and it only worked on some because it was Very Lucky.

This mostly works ... i.e. works for my USB Ethernet, except for a dangling
ifaddr reference left by the IPv6 code; have not yet tracked this down.
2000-02-01 22:52:04 +00:00
thorpej 891a2a9719 Implement bpfdetach(). 2000-01-31 23:06:12 +00:00