7625dd4cb4
remove mainbus.c: never actually used
1996-04-26 19:03:28 +00:00
d80422cd46
- zs: switch to MI driver
...
- clock, le, pcc, wdsc, zs: convert to new autoconfig scheme
- vme: add vme support
Contributed by: Jason R. Thorpe <thorpej@og.org>
1996-04-26 18:59:58 +00:00
ba1034fd85
- sync with new autoconfig code (iio goes away)
...
- add support for zs1, vme devices (untested)
Contributed by: Jason R. Thorpe <thorpej@og.org>
1996-04-26 18:47:34 +00:00
edda199ab0
patch from: Steve Woodford <steve@mctavish.demon.co.uk>
...
fixes the following problems:
- Timeout on START/STOP unit command (ie. when spinning up the drive)
Side effect of this fix is to reduce the busy-wait time in CMD phase.
- Occasionally, the driver would lose an SBIC interrupt, especially when
a tape drive was re-selecting on a busy SCSI bus.
1996-04-23 16:32:54 +00:00
78403e6c0c
Add a hardware dependent initialization function lehwinit()
1996-04-22 02:25:54 +00:00
442dec5d53
new driver: SCSI for VME147
...
contributed by: Steve Woodford <steve@mctavish.demon.co.uk>
this driver is based on the amiga sbic/33C93 driver. Steve has
cleaned it up and fixed lots of bugs. Note that the original driver
used features which require at least a WD33C93A (the vme147 has the
original WD33C93 chip <no 'A' suffix>). Steve has also written
the DMA routines for the 147 to get things really going. Hardware
scatter-gather DMA and sync. SCSI are not supported (yet). tested
on several disk drives and a tape drive. CD-ROM untested, but
should work.
1996-04-18 18:30:49 +00:00
da32bd7fed
add wdsc, enable FFS, move le
1996-04-18 18:14:32 +00:00
f56be1680c
add wdsc device
1996-04-18 18:07:58 +00:00
a574a3a423
add PCC_ICLEAR
1996-04-18 18:07:08 +00:00
94b120dfa8
add a "delay" function.
...
XXX: assumes vme147 speed. needs to be fixed and sync'd with DELAY.
[will work with jason/hp300 to fix it properly]
1996-04-18 18:06:30 +00:00
dbc3478277
establish a dk_establish() function.
1996-04-18 17:43:04 +00:00
d7d306aeb7
change LANCE copy & zero functions' names to start with amd7990_, and
...
remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
1996-04-18 00:25:11 +00:00
4d91dc7c18
pull in ieeefp.h from m68k common area
1996-04-12 18:38:00 +00:00
c7a59b578d
sync with sun3 version
1996-04-12 18:35:40 +00:00
4420159d4c
fix warning from gcc
1996-04-12 18:33:59 +00:00
83f9bdc359
update for the fact that config_found() and config_rootfound() now
...
return pointers. (Check vs. NULL, rather than just boolean tests.)
1996-04-04 06:25:00 +00:00
9ee06a9bd1
change vunmapbuf to void function to match MI code
1996-04-03 20:42:55 +00:00
6fa7f71c9c
fix christos' type-o: s/dec_decl/dev_decl/ on line 115.
1996-04-03 20:35:25 +00:00
5c98887b14
Fix typo.
1996-03-19 22:56:53 +00:00
82d914d090
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 01:26:49 +00:00
ab0e60a42f
fdopen -> filedescopen
1996-03-14 21:20:59 +00:00
18ec26aa21
add _MACHINE and _MACHINE_ARCH, which are like MACHINE and MACHINE_ARCH,
...
execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
1996-03-04 05:04:10 +00:00
1c5d7babe5
Clean up tabbing/spacing in defns of MACHINE, MACHINE_ARCH, and MID_MACHINE.
1996-03-01 23:30:08 +00:00
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
946696f064
Add m68k/db_memrw.c
1996-02-22 23:35:07 +00:00
9d2186505e
Use vprintf where it was intended, and use __dead
1996-02-13 18:06:10 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
2c8314f73c
vm prototype changes
1996-02-05 02:06:38 +00:00
fe18cd4ae7
Make sure to pull in the MI code.
1996-02-03 06:38:27 +00:00
2f74d151b9
Don't need unistd.h.
1996-02-03 05:45:11 +00:00
5bc076e17e
Use `-traditional-cpp' when building .s and .S files.
1996-02-03 00:43:50 +00:00
dcd66e9f4d
Clone these, and fix many bugs.
1996-02-02 20:08:17 +00:00
9db20bf150
Don't define _KERNEL here.
1996-02-02 19:42:08 +00:00
fc9d84fb46
assym.s -> assym.h
...
(Some ports did this already.)
1996-02-02 02:34:09 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
2fce159ff8
Changed name of sigaltstack's ss_base field to ss_sp to match XPG4.2 and
...
traditional usage.
1996-01-04 22:21:33 +00:00
17eb6e2bc1
Move the old-style disk instrumentation "structures" to a central location
...
(sys/kern/subr_disk.c) and note that they should/will be deperecated.
1995-12-28 19:16:31 +00:00
ce000f04ef
Remove deprecated cpu_setstack().
1995-12-21 05:01:32 +00:00
de6dad9228
Move bcopy/ovbcopy/memcpy into m68/m68k/copy.s, which is used by all
...
m68k ports already anyhow. No use in keeping 6 identical copies of this
function around.
1995-12-11 02:37:55 +00:00
0267460c6c
Use the MI LANCE code.
1995-12-11 01:59:17 +00:00
0e0ac5ed68
cpu_fork() now returns void.
1995-12-09 04:37:23 +00:00
0cd793449e
merge in changes from 1.1 release branch
1995-11-30 00:56:23 +00:00
54606ca765
sync with sun3 version and libsa changes
1995-10-12 22:48:20 +00:00
bb184934d0
sync with sun3 version and libsa changes
1995-10-12 20:39:49 +00:00
3cbeee1f5b
changed sysarch() to sys_sysarch()
1995-10-12 20:03:39 +00:00
ab55ab9c8c
changed blkclr to bzero
1995-10-12 20:02:19 +00:00
31552196e9
remove bzero/strlen/bcmp as they are now in libkern
1995-10-12 20:00:40 +00:00
6323b1197a
changed SUNOS_SYS_sunos_sigreturn to SUNOS_SYS_sigreturn.
1995-10-11 23:52:35 +00:00
245f292fed
Prefix names of system call implementation functions with `sys_'.
1995-10-07 06:25:19 +00:00
42662e7b9c
Need <sys/mount.h>
1995-09-22 15:29:33 +00:00
c9dfdd20b6
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:48:41 +00:00
7d7396c414
Make system calls conform to a standard prototype and bring those
...
prototypes into scope.
1995-09-19 22:53:47 +00:00
29053c58b2
SA_ONSTACK --> SS_ONSTACK
1995-09-01 20:05:59 +00:00
66dcd8fd69
Add entries for the ccd.
1995-08-17 17:40:42 +00:00
6cc376290b
Replace splnet() with splsoftnet(). Add splnet().
1995-08-13 00:27:11 +00:00
0744a4dc6a
sync with hp300 version (cpu_coredump changes)
1995-08-10 19:46:45 +00:00
b256a1bf82
sync with hp300 version
1995-08-10 19:44:01 +00:00
939f7eb7d0
add bounds_check_with_label(), and thus sync with hp300 version.
1995-08-10 19:36:41 +00:00
f54a288467
minor alphabetize clean up
1995-08-10 19:18:02 +00:00
d65beaf096
add bcea[] (as per sun3 port)
1995-08-10 16:21:54 +00:00
0b036e11bf
mvme68k port -- for the motorola vme147 m68030 card
1995-07-25 23:11:53 +00:00
chuck