3628d5523b
printf argument was in wrong position. Noted by Roger Hardiman
...
<roger@cs.strath.ac.uk>. (This code was ifdef'd out by default.)
2000-06-25 17:47:39 +00:00
c543a66253
remove some redundant <vm/vm_xxx.h> includes
2000-06-25 13:26:19 +00:00
44330020aa
Make PCI HME work.
2000-06-25 01:10:04 +00:00
79dffec702
Get PCI HME working.
2000-06-25 01:05:16 +00:00
c7477bfbe5
Fix spelling and formatting.
2000-06-25 00:23:13 +00:00
1e343745fc
regen
2000-06-24 12:16:55 +00:00
103a704990
add Intel 82801BA devices
2000-06-24 12:16:21 +00:00
6a6fdc8681
Kill SPLUSBCHECK -- it's not portable, and quite annoying on some
...
platforms which otherwise function just fine.
2000-06-24 04:12:53 +00:00
f82e306928
Add a clearing-house pseudo-device for system monitoring devices
...
such as the LM78 and VT82C686A (and eventually ACPI). Multiple
sensor devices can be hooked registered with `sysmon', and eventually
sysmon will also handle hardware (and software) watchdog timers.
Convert the `lm' and `viaenv' drivers to the new interface.
2000-06-24 00:37:19 +00:00
a4c83bd5bf
s/sc->sc_ethercom.ec_if./ifp->/ where appropriate and formerly forgotten,
...
for better readability.
2000-06-23 14:07:03 +00:00
139e08bead
Only "complain" about successful multicast setup if IFF_DEBUG was set.
2000-06-23 13:54:50 +00:00
3259331d60
There's only for 15 blocks of bootstrap, not 16.
2000-06-21 14:57:21 +00:00
bc83dce0c6
Regen.
2000-06-21 09:16:16 +00:00
0273966f04
Add CMD PCI0649 product ID.
2000-06-21 08:58:57 +00:00
dbc130250d
Patch from Eduardo Horvath: don't bus_dmamap_sync the script dma map if
...
it lives in the on-chip RAM !
2000-06-20 17:16:22 +00:00
318f9b048b
Feck.
2000-06-20 15:04:50 +00:00
4f82723a61
Regen.
2000-06-19 14:58:37 +00:00
e38812aaad
Add XTNDAccess IrDA.
2000-06-19 14:58:02 +00:00
88e928528c
Unswap functiona arguments that got swapped during ANSIfication. Now
...
mixer controls work again.
2000-06-19 11:43:48 +00:00
5f887c484e
The sparc clients of this driver (si & sw) now use bus_space_*().
2000-06-18 19:22:33 +00:00
849b74a926
add vga_extended_attach function on arc port, to make mmap() available.
...
XXX - is it better to remove "#ifdef arc"?
2000-06-17 07:11:50 +00:00
eee18e1f6c
beat back the undead: __BROKEN_INDIRECT_CONFIG had risen, and was
...
terrorizing innocent hackers...
2000-06-16 23:41:33 +00:00
6bda02ae4b
Fix typo.
2000-06-16 23:33:47 +00:00
bd24eacf64
Move dec_boot.h to here from arch/pmax/include and add the VAX boot block
...
info. Eventually Alpha boot block information as well.
2000-06-16 23:09:57 +00:00
485dc14ad7
No real change. Alphabetize the list of directories.
2000-06-16 19:33:50 +00:00
6e94b922a1
Comply with bus_dma(9) specs.
2000-06-16 11:47:34 +00:00
0011842ea8
Regen.
2000-06-16 08:13:50 +00:00
567c710f2b
Add some S3 chips.
2000-06-16 08:13:25 +00:00
18b4be2a92
Update from Onno:
...
- Add a tr_reopen() and use that instead of tr_init() for callouts.
- As tr_reinit() and tr_reopen() are used as callouts, protect them at splnet.
2000-06-15 19:55:27 +00:00
8aeaa34651
"files" file for the XMI bus.
2000-06-15 19:01:33 +00:00
fca2f40972
Regen.
2000-06-15 17:58:45 +00:00
032bdde358
Add Compaq's Personal Jukebox (I got one as a birtday present!)
2000-06-15 17:58:14 +00:00
297445c2a2
Turn on the hash filter enable bit in the RX configuration register
...
when loading the multicast hash filter (noted by itojun@iijlab.net ).
2000-06-15 15:34:32 +00:00
91e31abb8a
Add preliminary ieee1212reg.h (csr architecture which is the base spec for
...
1394).
2000-06-15 03:43:40 +00:00
d157be73ff
Update from Onno: add media selection.
2000-06-14 22:54:37 +00:00
17de155949
Make sure we use firmware->host communication channel in cz_intr(), from
...
Bill Studenmund.
2000-06-14 17:54:33 +00:00
f67e2cd132
Eliminate a race condition reported by mouse on port-sparc.
2000-06-14 08:01:26 +00:00
c521ba58c1
yet another change for NEC RISCstation 2250 of arc port.
2000-06-14 00:34:33 +00:00
3e3d2d7344
Regen.
2000-06-13 22:44:51 +00:00
d643d25eb9
Add CMD PCI0648.
2000-06-13 22:44:19 +00:00
0ea5e0720a
IBM Tropic Token Ring PCMCIA attachment. XXX Needs work.
...
Many thanks to Onno van der Linden for his help in getting this working.
2000-06-13 20:03:47 +00:00
ca34a6a69a
Call frontend enable/disable functions in the ioctl path.
...
Use _sc prefixes for some softc members.
A few minor cleanups.
2000-06-13 20:00:02 +00:00
a5598651e8
Arrange to use the right RAMDAC cookie at console initialization time.
...
[I thought I committed this months ago....]
2000-06-13 17:21:06 +00:00
45bdc51fa2
Regen.
2000-06-13 15:37:29 +00:00
22a10be43e
sheduler->scheduler, as pointed out by Klaus Klein
2000-06-13 13:59:15 +00:00
3553879fc2
Use my proper name.
2000-06-13 13:36:42 +00:00
a6c8d6231e
Regen.
2000-06-13 02:18:19 +00:00
d15c2a6a04
Include vendor name for IBM products.
2000-06-13 02:18:00 +00:00
9769dedd5b
Let this build on LP64 if DEBUG is defined.
2000-06-12 23:45:45 +00:00
6ab5c3364c
- add mmap support
...
- correct bug which wouldn't free allocated DMA segments
2000-06-12 22:40:20 +00:00
31c0cc5f46
Regen.
2000-06-12 22:33:41 +00:00
72d31d8d37
Add AMD 79c978 PCnet-PCI Home.
2000-06-12 22:33:06 +00:00
26bbb4f200
Regen.
2000-06-12 21:25:20 +00:00
034590578d
Shorter description for the HPT366
2000-06-12 21:25:01 +00:00
b21bc1b5b6
- add a pciide_irqack() callback, which clears the IDE DMA status bit once
...
the IRQ has been cleared on the drive.
- use pa->pa_class instead of re-reading PCI_CLASS_REG when possible
- Add support for Highpoint HPT366 and HPT370 (370 untested), based
on patches from Roger Brooks <R.S.Brooks@liverpool.ac.uk> posted on
current-users Mach, 15. Given how Highpoint docs have been wrong for the
366, the 370 is likely to not work.
Thanks to Chris Cappuccio <chris@dqc.org> for sending me the Highpoint
docs, and to Total Archive (http://www.totalarchive.com/ ) for sending
me hardware.
2000-06-12 21:20:51 +00:00
8642ac97bf
Regen.
2000-06-12 21:12:59 +00:00
1970e14b93
Add HPT366/370 device ID.
...
XXX Is 'TRIONES' the rigth vendor name ?
2000-06-12 21:12:30 +00:00
12d3bf8c1a
Add a callback (*irqack), for controllers that need special action to ack
...
the interrupt once it has been ack'd on the drive.
2000-06-12 21:10:40 +00:00
221a99f782
Handle "scsi bus mode change" interrupts on 895 and higther.
...
Thanks to Hal Murray for reporting the problem and testing the fix.
2000-06-12 20:13:41 +00:00
397fa0e4e2
Fix a couple of pastos.
2000-06-12 11:07:45 +00:00
b9140fbc0c
KNF a line.
2000-06-12 05:25:48 +00:00
305e44c869
check for when cnopen() will call itself recursively, and panic instead of losing badly.
2000-06-12 05:02:22 +00:00
7bb3d03448
Relax condition on 'sn' for atapi probe, it can be different from 0x1 with
...
some controllers/devices. Fixes a problem reported by Markus Illenseer.
2000-06-11 17:09:34 +00:00
7a0d138818
Nuke a (mostly) now-incorrect comment.
2000-06-11 03:35:38 +00:00
ea313649ff
defopt MIIVERBOSE
2000-06-11 02:13:34 +00:00
cc483219bc
Must be able to compile without "mtc".
2000-06-10 19:44:55 +00:00
8e8ecc1bb5
portability fix: when rotating, don't do shifts >= wordsize.
2000-06-10 17:01:15 +00:00
eb21ed4746
Adapt to going back to decemal device numbering.
2000-06-09 18:00:45 +00:00
8d04cd3f90
Rather than assinging 64 tty's per pci card, assign tty's as found.
...
Cyclades says driver should work with up to 128 tty's per pci card
even though they only support 64 now. Also matches FreeBSD behavior.
Print located tty's using new tty naming scheme - ttyCZ?? where ?? are
two hex letters.
Make firmware load on macppc - one le32toh() was missing.
2000-06-09 16:53:23 +00:00
7b82c5ef6c
add EGA display type
2000-06-09 16:07:55 +00:00
73a779fa1f
Restore the original copyright notice by Bill Sommerfeld
...
<sommerfeld@netbsd.org> since it is based on the original code.
2000-06-09 14:36:25 +00:00
7b45a44396
Add Farallon SkyLINE Wireless LAN Card for awi(4) driver.
...
Tested on FreeBSD 3.4-RELEASE by Dirk-Willem van Gulik <dirkx@webweaving.org>.
2000-06-09 13:05:02 +00:00
5a4b9fcbbf
Prevent a process being swapped out during I/O if the data buffer is
...
allocated on stack. This potential problem is noticed by Noriyuki Soda
and the idea and sample code to fix is given by Jason R. Thorpe.
2000-06-09 08:54:19 +00:00
f44d7a9a53
Rename remaining references from xe to xi. Clean up debug messages.
2000-06-09 08:22:13 +00:00
4da3935bae
cleanup haeders.
...
add opt_awi.h to define AWI_DEBUG, AWI_WEP_ARC4.
show the firmware version at attach.
create a framework to support WEP (encryption code is not included for now).
a new wiconfig compatible ioctl interface replaced the awictl interface.
fix memory leak in selecting AP
fix bugs in ESSID selection
changes from FreeBSD-current by Warner Losh:
revision 1.2
date: 2000/04/17 22:58:15; author: imp; state: Exp; lines: +16 -1
Provide mem* for compat with NetBSD to fix LINT
fixes from FreeBSD-current by Guido van Rooij:
revision 1.4
date: 2000/05/29 19:58:10; author: guido; state: Exp; lines: +5 -2
Fix a panic resulting from an obvious null pointer deref.
Apparently some other panics still exist in this driver, but with
this fix, it was at least possible to run the Nokia card at SANE 2000.
2000-06-09 05:31:15 +00:00
0f76c56f2d
increase number of parameters of pckbc_cnattach(), since offset of command port
...
is not 4 (KBCMDP), but 1 on jazz based platforms of arc port.
2000-06-09 04:58:32 +00:00
8ac7bdd00c
changes for NEC RISCstation 2250 of arc port.
2000-06-09 04:48:12 +00:00
77625cf7ec
long long constant needs "LL" suffix.
2000-06-09 04:45:53 +00:00
b8f4f2be87
Regen.
2000-06-09 00:21:08 +00:00
def28a5cd2
Add some PCI devices found in the IOpener (commited from the IOpener itself :).
2000-06-09 00:20:18 +00:00
1e158fae9a
nuke bogus use of s = spl0() / splx(s). reviewed by Jason Thorpe.
2000-06-08 22:43:15 +00:00
6dd21e55a9
Make attach messages consistent with PCI drivers. Make function pointer
...
usage consistent with other drivers.
2000-06-08 22:15:52 +00:00
944b6966e9
Fix a transmit bug and get a little more out from the receive logic.
2000-06-08 19:58:49 +00:00
625dbd8f87
in allegedly-MI code, if we're gonna use '#pragma pack(N)', #pragma pack()
...
should be used to reset the packing. (#pragma pack(4) was used here
before. "wrong!")
2000-06-08 18:22:15 +00:00
b6a821f042
Change IPL when bridge's interrupt handler calls child device's
...
interrupt handler (This solution is not very good).
2000-06-08 10:28:28 +00:00
d8dcb11d4f
don't include ISA headers. these have been properly abstracted so that
...
the ISA headers are unnecessary, and they're used by PCI VGA. There may
not be any ISA at all.
2000-06-08 07:01:19 +00:00
295ed77595
The OPTi controller supports a 32-bit dataport after all.
...
Also detect when the chip is sitting on a 25MHz PCIbus and
set the timing registers accordingly.
2000-06-07 20:42:52 +00:00
887d4555cd
Regen.
2000-06-07 19:53:17 +00:00
4837200a8c
Add vendor/device ID for 3ware Escalade IDE RAID controller.
2000-06-07 19:52:07 +00:00
3f94f56142
Adapt struct scsipi_adapter changes.
2000-06-07 14:40:20 +00:00
a67130a218
regen.
2000-06-07 09:55:22 +00:00
09b843b7f6
fix a couple of the sun entries.
2000-06-07 09:52:16 +00:00
dca97557cd
Add CB_BCR_RESET_ENABLE in bridge control resister's bit definition.
2000-06-07 09:02:46 +00:00
b15bbb90f9
Add missing break;
2000-06-07 04:31:49 +00:00
13ed0863f8
Regen.
2000-06-07 01:58:17 +00:00
e2c1012576
Add Trident 9397DVD.
2000-06-07 01:57:30 +00:00
23ef490928
Deal with the fact that tsleep() may be a macro.
2000-06-07 00:33:51 +00:00
c85d6d7ca3
Improve the Cypress name a little.
2000-06-06 22:56:06 +00:00
a452638f06
In pciide_mapreg_dma(), check to see what type the BAR is before
...
mapping the registers, as suggested by a comment in that function.
2000-06-06 22:47:22 +00:00
d98bf28b13
Make the frontend print a newline (follows similar change for isa and pcmcia front-ends)
2000-06-06 20:09:20 +00:00
10e30038a9
Fix braino in previous, pointed out by Jaromir.
2000-06-06 18:42:47 +00:00
a4f554c4ac
Add CS4235 MPU id.
2000-06-06 18:08:51 +00:00
ba5df2479b
Shorten names of VIA controllers to fit in 80 columns with versions.
2000-06-06 17:48:12 +00:00
c40fa3c4d4
Actually program the DMA mode of the drives into the Cypress
...
controller. Fixes a long-standing problem where IDE DMA wasn't
working on the AlphaPC 164SX.
2000-06-06 17:34:22 +00:00
3b8b24cffe
Only wait 100 ms instead of 1 s for the SEEPROM to come ready. This is
...
still plenty for cards with SEEPROM's and reduces the delay on platforms
without, which conveniently also avoids triggering the O2 watchdog timer.
2000-06-06 17:29:40 +00:00
b4b667c0a0
Make ID printing a little more robust in case of problems reading
...
AC97 registers.
2000-06-06 17:25:52 +00:00
d862695c41
Make 3Com names a little more consistent.
2000-06-06 17:21:42 +00:00
f0d0078f1b
Add Olicom GoCard.
2000-06-06 17:19:59 +00:00
cd4324537d
Density codes are usually given in decimal, so print them that way.
2000-06-06 17:16:02 +00:00
8b0390203b
Some minor diagnostics cleanups.
2000-06-06 16:41:33 +00:00
63649c5744
Make the frontend print a newline.
2000-06-06 16:27:49 +00:00
1ec719ccc0
Add power management hooks.
2000-06-06 16:26:57 +00:00
f1802cf848
Fix previous change: guard against missing subdevices of pckbc.
2000-06-06 16:21:22 +00:00
4b7ec26c89
One comment too much..
2000-06-06 16:16:36 +00:00
c4df411abd
Add comments for a few drivers and the lines for the Tropic attachment.
2000-06-06 16:15:31 +00:00
499db14bcb
sun3 always defines Debugger(), so don't redefine it.
2000-06-06 14:24:05 +00:00
e1e9261889
fix typo
2000-06-06 14:01:40 +00:00
1c94b92bc4
Initialize pointer before doing free of it.
2000-06-06 11:36:21 +00:00
05d7f969b9
Regen.
2000-06-06 07:55:50 +00:00
aed5858e8b
Add the product ID for the ESS Maestro 3 modem function as well.
2000-06-06 07:55:17 +00:00
21d9669e4f
Common routines for read/writing Cypress 82c693 control registers. Needed
...
by `pciide' and the Alpha `sio' (PCI-ISA bridge) driver.
2000-06-06 03:07:39 +00:00
bbca3924cd
Replace "timestamp" with "counter" in previous change, to avoid any
...
possible confusion that it has anything to do with accurate
measurement of time.
New names:
__HAVE_CPU_COUNTER
cpu_counter()
cpu_hascounter()
2000-06-06 01:33:15 +00:00
7497ddcce5
/dev/random code cleanups:
...
- Add comments about which spls apply to which data structures.
- Consistently protect the rnd_samples queue (the queue of
unprocessed samples) at splhigh().
- allow MD code to supply cpu_timestamp() and cpu_havetimestamp() for
an optional higher-resolution clock/roulette wheel source.
- Collect more statistics on the pool state (keeping track of where
collected bits are going, in addition to where they came from).
- Add RNDGETPOOLSTAT ioctl to get the additional stats.
- Flush a few unused rndpool calls.
- XXX XXX Cryptographic changes:
- 32-bit rotate is:
((val << rp->rotate) | (val >> (32 - rp->rotate))),
not
(val << rp->rotate) | (val >> rp->rotate)
or
((val << rp->rotate) | (val >> (31 - rp->rotate)))
- Avoid overloading of rp->rotate and double-rotation of data
(which limited pool mixing somewhat; "rotate" never got above 7).
- Be more paranoid (but probably not paranoid enough) about mixing
output back into the pool. This is an improvement, but it needs
revisiting soon.
We should follow the spirit of some of the recommendations in
the Schneier PRNG papers:
http://www.counterpane.com/yarrow-notes.html
http://www.counterpane.com/pseudorandom_number.html
including:
- two (or more) stage operation for better isolation between inputs
and outputs.
- use of keyed one-way functions (probably better even than
invertible keyed functions like 3DES) at key points in the data flow,
so that breaking the PRNG is clearly as hard as breaking the function.
2000-06-05 23:42:34 +00:00
fc43b2daa3
Replaced by xi(4).
2000-06-05 23:21:35 +00:00
d0241b393f
Replace references to xe with xi. Clarify description to avoid
...
confusion with the Xircom tlp-based cards.
2000-06-05 23:18:50 +00:00
3129070fd6
New driver for Xircom CreditCard PCMCIA Ethernet. Replaces xe driver which
...
didn't work. Renamed to avoid clash with next68k network driver.
2000-06-05 23:14:22 +00:00
63ce2b1954
Clean up usage of XIRCOM/TDK identifiers.
2000-06-05 23:06:31 +00:00
923b803b77
Regen.
2000-06-05 23:05:30 +00:00
b1cff781b9
- Clean up XIRCOM entries
...
- Add entry for Xircom CreditCard Ethernet + Modem 28
- Add entry for Intel EtherExpress PRO/100
- Add entry for Compaq Netelligent 10/100 Ethernet
2000-06-05 23:04:04 +00:00
c2a8e26e11
- remove conditional compilation on NAUDIO
...
- use preprocessor for constants
2000-06-05 23:02:04 +00:00
bcf02ec8ff
If rnd is configured into the kernel, do rnd(4) entropy collection
...
from devices connected to pckbc:
- Do actual sample collection in pckbc.
- Add rndsource_element_t to the slot data.
- Change pckbc_set_inputhandler() to take an additional argument,
the name of the device, which is (eventually) passed into
rnd_attach_source() to identify the source.
- Change callers of pckbc_set_inputhander() appropriately.
2000-06-05 22:20:54 +00:00
0e7cd755f4
use the correct variable in a debug printf().
2000-06-05 21:47:25 +00:00
d4ffcd0cec
change ifdef __sun3__ to sun3, since the former isn't defined on sun3.
...
(not that it matters, since the sun3 currently has its own copy of
these files anyway, but it's nice to be consistent.)
2000-06-05 15:58:43 +00:00
5138b1b1bb
Well, this is esp_pcmcia, not esp_pci.
2000-06-05 15:36:45 +00:00
a12331c461
Oops, struct scsipi_adapter was changed recently.
2000-06-05 15:19:42 +00:00
8c4d1bf1f9
Adapt MI ncr53c9x changes.
2000-06-05 15:08:00 +00:00
ca3d9c7fa7
Regen.
2000-06-05 11:34:07 +00:00
428a7ca4e3
Add the ESS Maestro 3 product ID as well.
2000-06-05 11:33:35 +00:00
9b40e3731a
Regen.
2000-06-05 11:31:15 +00:00
be40495bb0
ESSTECH:
...
* add what's allegedly the Maestro 1's product ID.
* align product names with data sheets.
2000-06-05 11:29:28 +00:00
4371d91433
Have MI ncr53c9x_attach() the 2nd and 3rd arguments for scsipi_adater
...
and scsipi_device respectively, with size reduction of ncr53c9x_softc.
Specifying NULL instructs the driver to use default adapter and default
device codes. Every target port has ncr53c9x_attach(sc, NULL, NULL) anyway.
2000-06-05 07:59:50 +00:00
6204fa3c99
Update to new evcnt stuff
2000-06-05 02:28:19 +00:00
2f85fe7adb
Adjust to new evcnt stuff.
2000-06-05 00:09:17 +00:00
745e3fef63
pciiide -> pciide
2000-06-04 22:22:12 +00:00
a5156a5c97
Cleanup #if 0 cruft.
2000-06-04 22:21:09 +00:00
cffb580806
Implement the more flexiable `evcnt' interface as discussed (briefly) on
...
tech-kern and now documented in evcnt(9).
2000-06-04 19:14:14 +00:00
c8c1e5854f
Fix wrong test for (software) queue blocked condition.
2000-06-04 11:42:55 +00:00
0bd304e528
More event counter stuff. Plus a little cruft cleanup while doing it.
2000-06-04 06:16:53 +00:00
6dcc553fae
Remove outdated comment.
2000-06-04 02:16:05 +00:00
11ab56a399
Start counting interrupts.
2000-06-04 02:14:42 +00:00
wiz