the rules due to needing to conditionally postprocess the HAL object file.
Macppc needs a a non-ELF HAL (EABI) object, so take care of that by default
in the atheros include file.
* lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c
is included there too; dev/ic/lpt.c is not included if ppbus is
configured or if there is alternative platform lpt (like for pc532)
* g/c MD lpt definitions and custom puc/upc attachments,
glue moved to conf/files and dev/pci/files.pci respectively; remove
device lpt definition from dev/isa/files.isa
* add ppbus parport attribute, atppc device attachments, adjust plip and lpt
glue
- factor out disksubr.c between sun3, sparc and sparc64. Keep the sun3
groveling code to find a NetBSD disklabel in the first sector (so that it
can find a label at the old sun3 LABELOFFSET) as a fallback is not
label at LABELOFFSET, or sun label is present.
- Fix the sun3 LABELOFFSET (was 64, but the kernel wrote the NetBSD label at
128)
- Make next68k disksubr.c always write a next-compatible disklabel.
- remove #ifdef __sparc__ hack from disklabel(8), and change it to issue
a DIOCWDINFO after writing the disklabel to the raw partition in the
-r/-I case (so that the kernel can convert the label if needed).
- Switch rtc (M5819) routines to use MI mc146818(4) driver.
Tested on Ultra5 (mkclock_ebus), but mkclock_sbus and rtc_ebus are not tested.
XXX This file should be split into each device and each bus attachment,
XXX and moved into sys/arch/sparc64/dev or sys/dev/sun.
/dev/power.
XXX - due to the way interrupt handling is structured we have no easy
way to defer clearing the button interrupt until the sysmon callback
has happened and the event is dispatched. We clear it imediately on
return from the interrupt handler. This means we get an interrupt storm
until the button is released, and then start to handle it.
This needs to be fixed! (But with the default application for the power
button does not make a user visible difference.)
This is derived from alpha/microtime.c and i386/tsc_microtime.c,
and will share with both ports.
This should fix PR port-sparc64/18452.
(approved by martin)
children to attach; it is not sufficient to have an interface
atttribute which only happens to have the same name.
Fix the same mistake with the sabtty declaration.
layers. Common middle layer shared by kbd_zs and sunkbd is moved into
the new file. Move shared config directives to files.sun and adjust
ports' files.* accordingly.
Need this to support console/Xsun on Mr.Coffee JavaStation.
Tested on sparc, sparc64 (by martin) and sun3 (by jdc).
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
NULL for root PCI busses. For busses behind a bridge, it points to
a persistent copy of the bridge's pcitag_t. This can be very useful
for machine-dependent PCI bus enumeration code.
* Implement a machine-dependent pci_enumerate_bus() for sparc64 which
uses OFW device nodes to enumerate the bus. When a PCI bus that is
behind a bridge is attached, pci_attach_hook() allocates a new PCI
chipset tag for the new bus and sets it's "curnode" to the OFW node
of the bridge. This is used as a starting point when enumerating
that bus. Root busses get the OFW node of the host bridge (psycho).
* Garbage-collect "ofpci" and "ofppb" from the sparc64 port.
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.
Audio-related stuff is left almost intact.
* support audiocs at ebus playback and capture
tested on krups and u5 (thanks, martin)
* make first attempt at supporting audiocs at sbus capture
* nb: full-duplex is not tested
* while here, fix CSAUDIO_MONITOR_MUTE to be of CSAUDIO_MONITOR_CLASS
i.e. outputs.monitor.mute -> monitor.monitor.mute
Ok by pk, eeh.
