6c0101debe
Add NODEBUG
2016-02-21 03:34:27 +00:00
dc084e400e
Introduce NOPIE and NOCTF so that standalone programs build properly.
2016-01-31 15:30:14 +00:00
ffeb8dbf4e
Define _KERNTYPES for things that need it.
2016-01-23 21:22:45 +00:00
0bc53a588b
LIBEXECINFO
2015-11-07 23:41:58 +00:00
6811dc67f2
Make LIBCRT* depend on the right files if MLIBDIR from MKCOMPAT is defined.
2015-06-07 15:04:28 +00:00
6830ef879f
PR toolchain/9618: add ".d" to MKDEP_SUFFIXES so the depend files are rebuilt
...
if any of their dependencies (i.e. the files they refer to) are changed.
This allows changes to transitive included headers to be handled properly.
2014-12-01 01:34:30 +00:00
1339b2cc13
Add MKCTF
...
This variable separates CTF stuffs from MKDTRACE; we can build DTrace
solely without building and using them. This allows us to use DTrace
even if CTF stuffs have problems (actually they have now).
This variable would be merged into MKDTRACE eventually, once CTF stuffs
work correctly again.
2014-03-25 09:52:55 +00:00
199409cf03
let's see if the new dwarf library can handle dwarf 4
2014-03-09 18:00:51 +00:00
aca5beab65
If we are compiling with -g and using gcc4.8 and dtrace downgrade
...
dwarf generation to version 2 for now.
2014-03-02 22:22:05 +00:00
937a61eb8d
-Wl,-pie and -r don't agree with each other, so filter the former out.
2014-01-15 13:59:38 +00:00
d0f0da0f65
Relink binaries if crti.o changes.
2013-11-11 10:24:53 +00:00
986a0d2f80
Add libxcb
2013-09-29 14:36:25 +00:00
f8cebe2a9e
add LIBX11_XCB; unfortunately since the library is named with a -
...
in it, we have to use an ugly hard coded assignment for now.
(could be cleaned up with more make variable magic i'm sure.)
2013-05-31 06:48:43 +00:00
07a6c80766
ldopts should be before ldadd like everywhere else.
2013-04-04 21:14:36 +00:00
fbf6778a1b
Since the libraries are produced with different MK flags than the programs,
...
we check for existance of the files instead of the MK flags.
2013-02-14 03:02:47 +00:00
4880aaed67
Add PROGDPLIBS
2013-02-14 01:58:00 +00:00
08c1bf572c
CTFCONVERT me harder.
2013-01-26 21:49:20 +00:00
aa675a73cf
Now that we have separate debug sets, add -g if ${MKDEBUG} is set for
...
program builds since we don't need to install that symbol files.
2013-01-17 15:42:59 +00:00
fcb81e1f92
Allow DPADD to be specified on a per-program basis.
2012-08-24 20:26:24 +00:00
067600c8cf
Revert last, it breaks the tricks xsrc uses.
2012-08-23 21:21:14 +00:00
8e96262375
Remove SHLIBINSTALLDIR and SHLINKINSTALLLIBDIR. Add rpath entries, if
...
SHLIBDIR differs from /usr/lib.
2012-08-23 15:45:02 +00:00
eda981fc36
add MKRUMP by popular demand.
2012-08-08 13:56:13 +00:00
df92d05dec
Move "libexpat" from X11 into base which fixes PR lib/40346.
...
This change was approved by the Core Group.
2012-02-29 20:07:51 +00:00
f5d3f68d54
Remove another ${SIZE}
2012-02-21 01:41:09 +00:00
0bf8cdb842
Remove ${SIZE}
2012-02-20 18:23:50 +00:00
47c982a38d
Add support for --combine with gcc.
2012-02-19 23:19:37 +00:00
50a5b513a2
Add libtre
2011-11-05 22:56:30 +00:00
fa86ae90df
- no need to special-case libraries with weird characters.
...
- add a note about adding new libraries.
2011-10-16 01:24:05 +00:00
c4fb05f751
fix list of libraries to reflect reality.
2011-10-16 01:14:33 +00:00
386a389aab
Move all "clean" and "cleandir" processing to a new bsd.clean.mk
...
file, as proposed in tech-toolchain.
2011-09-10 16:57:35 +00:00
ba5a5a1119
Add new "analyze" command to run clang's static analyzer in a directory
...
on all C/C++ files.
2011-08-27 18:35:19 +00:00
ae7d1665f4
The new Heimdal adds -lwind and -lheimbase to the set of libraries,
...
so define the corresponding LIB* variables.
These are also needed in the PAM_STATIC_* variables, so add them there too.
2011-04-26 08:22:17 +00:00
5e3fd2e02b
Adjust --sysroot related usage:
...
-Wl,-rpath does not expand =, so just drop it.
Drop -Wl,-rpath-link entries that duplicate the -Wl,-rpath entries, this
is done implicitly now that ld is built with sysroot support.
Use ${DESTDIR} explicitly for the remaining -Wl,-rpath-link entries.
2011-04-11 23:03:38 +00:00
c28ff146c9
For USETOOLS=yes, use the --sysroot support of the compiler to cut down
...
the number of hard-coded pathes and magic invocations.
2011-04-10 16:52:36 +00:00
8de5cd3354
Revert previous (revision 1.261): it broke the build because PROG_CXX is
...
defined in terms of PROG, so later on we would end up with target duplicates
because both PROG_CXX and PROG were being converted to PROGS_CXX and PROGS.
Did not catch this earlier because the test build I did was not clean and
thus the duplicate targets did not have nasty effects.
2011-03-08 07:53:43 +00:00
18b629ec58
Always convert PROG to its plural form independently of whether PROG_CXX
...
is defined or not. From Garrett Cooper in private mail.
2011-03-07 19:05:03 +00:00
07be9009b6
Define LIBATF_C and LIBATF_CXX to point to their corresponding .a files and
...
use these to properly set DPADD for test programs.
2011-02-20 20:16:01 +00:00
efe059951d
add saslc
2011-02-13 00:42:45 +00:00
afe7317d58
Don't use -nostdinc or -nostdinc++ if this is included in a HOSTLIB.
2011-02-06 01:08:37 +00:00
14c8789b8c
Add rump bits to DPSRCS so that update builds work correctly.
2011-01-17 18:05:52 +00:00
43673c5e38
befriend RUMPPRG with CRUNCHEDPRG
2010-12-13 21:47:04 +00:00
84d9317cb6
Define RUMPPRG, which is just like PROG, except it additionally
...
builds a rump client with the name rump.${PROG}. The rump client
is not installed suid/sgid by default even if BINMODE is defined.
2010-12-13 17:22:26 +00:00
f360555e8a
Revert last, gcc(1) checks explicitly for -r on some platforms to disable
...
passing down --relax as well.
2010-12-10 20:08:17 +00:00
49755c474a
gcc passes down -r directly to ld, so make it explicitly a linker option.
2010-12-08 02:04:13 +00:00
d9da1368fc
Don't depend on ${CC} passing down -R to ld, use -Wl,-rpath explicitly.
2010-12-08 01:57:22 +00:00
44f36b23ab
Preserve date on original shared library or program when stripping
...
the debug symbols and adding the debug-link to .debug.
Use '(rm -f file; false)' in the failure path to force failure.
Based on solution proposed by Nicolas Joly on tech-toolchain in July 2010.
Should fix PR toolchain/44046 from Andreas Gustafsson.
2010-11-08 06:54:52 +00:00
aa94cc597c
Link Lua to the build and add the resulting files to the distribution sets.
...
Document the addition of Lua and the change we made to the default settings.
2010-10-31 11:52:50 +00:00
4c92852a80
remove almost all the ability to build netbsd with an a.out target.
...
we're ELF now, and there are many missing checks against OBJECT_FMT.
if we ever consider switching, the we can figure out what new ones
we need but for now it's just clutter.
this doesn't remove any of the support for exec_aout or any actually
required-for-boot a.out support, only the ability to build a netbsd
release in a.out format. ie, most of this code has been dead for
over a decade.
i've tested builds on vax, amd64, i386, mac68k, macppc, sparc, atari,
amiga, shark, cats, dreamcast, landisk, mmeye and x68k. this covers
the 5 MACHINE_ARCH's affected, and all the other arch code touched.
it also includes some actual run-time testing of sparc, i386 and
shark, and i performed binary comparison upon amiga and x68k as well.
some minor details relevant:
- move shlib.[ch] from ld.aout_so into ldconfig proper, and cut them
down to only the parts ldconfig needs
- remove various unused source files
- switch amiga bootblocks to using elf2bb.h instead of aout2bb.h
2010-07-06 05:59:50 +00:00
6405962d8a
When extracting separate debug symbols with MKDEBUG, there's no need
...
to leave the original file unstripped...
2010-04-24 07:57:04 +00:00
61fb3737eb
DTrace: Add CTF generation to the make framework. Only enabled when
...
MKDTRACE=yes.
2010-03-02 20:49:18 +00:00
christos