and then modified, it is much easier to let this late, user-oriented
customisation be done automatically. These mods let mkimage change
information based on files in a "custom" directory, which can be set
in mkimage using -c customdir.
After all other configuration, the files under custom/ will be copied
into the main image. The files under custom/ are taken into account
when performing autosizing.
Also, generalise the sets directory to point to the current machine
architecture, although this can be overwritten from the command line
by anyone making cross-images.
An example to make a user image with an embedded read-only 100 MB
iSCSI target:
% ./mkimage -c custom
=== making a new 272 MB image in usermode.img ===
272+0 records in
272+0 records out
285212672 bytes transferred in 7.616 secs (37449142 bytes/sec)
=== mounting image via vnd vnd0 ===
/dev/rvnd0a: 272.0MB (557056 sectors) block size 8192, fragment size 1024
using 6 cylinder groups of 45.34MB, 5803 blks, 11264 inodes.
super-block backups (for fsck_ffs -b #) at:
32, 92880, 185728, 278576, 371424, 464272,
=== installing sets ===
base
etc
modules
=== performing customisations ===
=== making extra directories ===
=== customising /var/tmp ===
=== user customisations from files in custom ===
Filesystem 1K-blocks Used Avail %Cap Mounted on
/dev/vnd0a 269967 263958 -7489 102% /mnt
% ls -l -R custom
total 8
drwxr-xr-x 3 agc agc 512 Jan 18 03:58 etc
drwxr-xr-x 2 agc agc 512 Jan 18 04:00 iscsi
custom/etc:
total 8
drwxr-xr-x 2 agc agc 512 Jan 18 03:58 iscsi
-rw-r--r-- 1 agc agc 564 Jan 18 03:58 rc.conf
custom/etc/iscsi:
total 6
-r--r--r-- 1 agc agc 799 Jan 18 04:27 targets
custom/iscsi:
total 102484
-rw-r--r-- 1 agc agc 104857600 Jan 18 04:00 iscsi-target0
% sudo vnconfig vnd0 usermode.img
% sudo mount /dev/vnd0a /mnt
% cat /mnt/etc/iscsi/targets
# $NetBSD: targets,v 1.2 2006/02/16 19:30:57 agc Exp $
#
# Structure of this file:
#
# + an extent is a straight (offset, length) pair of a file or device
# it's the lowest common storage denominator
# at least one is needed
# + a device is made up of one or more extents or other devices
# devices can be added in a hierachical manner, to enhance resilience
# + in this example, no device definitions are necessary, as the target
# will just use a simple extent for persistent storage
# + a target is made up of 1 or more devices
# The code does not support RAID1 recovery at present
# Simple file showing 1 extent, mapped straight into 1 target
# extent file or device start length
extent0 /iscsi/iscsi-target0 0 100MB
# target flags storage netmask
target0 ro extent0 0.0.0.0/0
% ls -l /mnt/iscsi/iscsi-target0
-rw-r--r-- 1 agc agc 104857600 Jan 18 04:00 /mnt/iscsi/iscsi-target0
% diff custom/etc/iscsi/targets /mnt/etc/iscsi/targets
%
char 160 in the input to csh, lead it to an infinite loop, because tcsh tables
counted this as a space character, but the word logic switch does not. Change
that character tables, so that this does not count as a spacing character
anymore, by syncing the table with the one from tcsh.
- The G-REX 4000 and G-REX 1200 are now really supported and working (still only 1st slot but the rest are a matter of time).
- Add bridge identification to p5pb, simplifies the driver and make it more user-friendly.
- Retire P5PB_GENFB and P5PB_OLD_FIRMWARE options, these are now handled automatically, depending on used hardware and firmware.
- Add PCI bus reconfiguration support to p5pb (PCI_NETBSD_CONFIGURE), allows using G-REX without boot to AmigaOS.
- Bring p5pb registers desription up to date with my knowledge.
- Add a lot of debugging code to p5pb (enabled by P5PB_DEBUG kernel option).
- Fix PCI_NETBSD_CONFIGURE in mppb (now it really works).
- Fix quirk handling in zbus.
- Update GENERIC.in and regen the kernel configs.
- Misc cleanup.
I find out why these don't work ( 1680x1200 works but not 1920x1080 ).
Also use sync polarity info from videomode instead of guessing.
Finally, if there is no useble preferred mode, be a little smarter trying
to find the next best mode.
