Commit Graph

72 Commits

Author SHA1 Message Date
jakllsch 7a9caa1f87 Improve "identify" output slightly:
- Capitialize "Name" in World Wide Name.
 - Print the World Wide Name if it exists.
 - Use LBA48 maximum address when available for "total sectors" output.
 - So that geometry will display on more drives, don't be as strict when
   checking for non-ATAPI devices.  (This seemed to be an issue on at least
   one instance of a Caviar SE16 drive.)
 - Check more carefully for valid/relevant queue depth before printing it.
 - Increment the queue depth by one for display.

While here, wrap some long lines that I should have had wrapped before they
were commited in rev. 1.46.
2009-06-08 23:26:13 +00:00
mlelstv 3479599edd make space for a trailing \0 in model,revision and serial buffers. 2009-06-06 09:18:55 +00:00
lukem c1237301b3 fix sign-compare issues 2009-03-16 12:52:07 +00:00
dholland 992b45040f Add two missing SMART attributes; PR 37967 from Henry Bent. Also add a
third I found while digging around, and fix one whose name was typoed.
2008-08-25 00:45:56 +00:00
dholland 8bc7b72389 Fix this to not need -Wno-pointer-sign. Make it pass -Wsign-compare too,
while I'm at it.
2008-07-24 05:21:12 +00:00
gmcgarry 8d54263568 Add HAVE_PCC tests for -Wno-pointer-sign. 2008-07-21 11:38:44 +00:00
martin 11a6dbe728 Convert TNF licenses to new 2 clause variant 2008-04-30 13:10:46 +00:00
martin ce099b4099 Remove clause 3 and 4 from TNF licenses 2008-04-28 20:22:51 +00:00
perry 4d096031f0 replace instances of __attribute__((__packed__)) with __packed 2007-12-15 16:03:29 +00:00
christos eb90df6853 From Marco Trillo (marcotrillo at gmail dot com):
Add Advanced power management in atactl(8)
2007-11-18 17:48:21 +00:00
xtraeme 51f434b0bb Fix typo in SATA features: Perservation -> Preservation. 2007-11-04 02:34:27 +00:00
bouyer bd627359dd Improved SATA support, from Jonathan A. Kollasch in PR bin/36772:
* use full 5-bit command queue depth that SATA supports
* decode SATA bits
2007-08-21 16:53:18 +00:00
christos 7e3b870a41 add missing initializers 2006-10-16 00:45:19 +00:00
xtraeme 91254d0d23 It's WDCC_SECURITY_FREEZE not WCDD_SECURITY_FREEZE.
Noticed by Sergey Svishchev.
2006-09-24 08:33:30 +00:00
xtraeme e2e3ea2b19 Do not print "SMART not supported" when SMART was disabled, this
fixes PR bin/18666.
2006-09-23 15:24:24 +00:00
mrg aadd7d4847 sprinkle some -fno-strict-aliasing and -Wno-pointer-sign with GCC4. 2006-05-11 23:16:28 +00:00
wiz 5d1e8b2745 Fix some typos. 2006-02-25 02:28:55 +00:00
dbj 5a25538485 fix byteswap of log revision structure check, improve error printout 2005-11-29 08:47:22 +00:00
dbj 1aeda8c1bc add newline termination on error message 2005-11-29 08:06:13 +00:00
christos 2c6eadc9ce Move WARNS=3 to the Makefile.inc, and add a little const to the remaining
programs that did not compile before.
2005-06-27 01:00:04 +00:00
wiz 5c35c1667a Improve formatting. 2005-04-12 11:50:29 +00:00
drochner e69243d0ea document the "security" command 2005-04-12 11:41:14 +00:00
drochner 48eac6e41a Implement a "security" command with subcommands to query the status of
the "security" extension and to "freeze" it. With the security extension
frozen, disk passwords cannot be set anymore, until the next hard reset.
Normally, this is the business of the BIOS, but older/buggy/embedded
BIOSes don't care. This leaves the (theoretical) possibility that a
malicious program in posession of superuser rights sets a disk password,
rendering the disk useless (or at least uneconomical to recover from).
Inspired by an article in the german "ct" magazine.
Being here, consolidate the implementations of IDENTIFY into one, and
fix an obvious alignment problem.
2005-04-12 11:40:46 +00:00
xtraeme 76500fc2f9 WARNS=2 is the default defined in sbin/Makefile.inc. (thanks wiz) 2005-01-20 16:39:22 +00:00
xtraeme 743ce43fbc Kill __P(), remove main() prototype; WARNS=2 2005-01-20 15:36:02 +00:00
dogcow 72e5ae587b Add missing SMART attribute (6, Read channel margin) 2005-01-17 13:00:32 +00:00
fvdl 08d19d088d * don't swap the WDSMART_CYL value, it isn't needed
* swap the 16- and 32 bit fields of the SMART structures (where used)

Makes SMART commands work on big-endian systems.
2004-11-17 15:40:50 +00:00
wiz 67bfa4e06f Bump date for "offline" description. 2004-10-10 09:45:10 +00:00
soren d353df2fed Add offline command to usage() and man page. 2004-10-08 18:53:42 +00:00
mycroft 82f913eae9 Combine the listing of enabled/disabled features with the general listing of
features.
Add an "smart error-log" command to display the SMART error-log.
Add an "offline" command to run offline selftests.
2004-10-08 17:19:50 +00:00
erh 4ed261aea9 Add a couple cross-references to make similar ctl commands easier to find. 2004-09-16 18:02:27 +00:00
atatat d96c6bad93 Add some more attribute "names", taken from
http://freepgs.com/smart/attributes.php

which gets them from smartmontools as maintained by Bruce Allen.

Note that some of these attributes should be "named" differently
depending on the drive (point for future work?), but at least now
there are names for some of the one that were missing them.
2004-09-10 04:11:09 +00:00
atatat 2a3ef0e821 White space police 2004-09-10 03:43:52 +00:00
wiz 2e3cdda09c No leading zeroes in date string. 2004-08-02 23:16:02 +00:00
bouyer 502e9c8209 Add infrastructure for ATA bus commands, and implement the reset bus command. 2004-08-01 21:41:49 +00:00
mycroft 7f2778f63a Print the raw SMART values always. These are important in a bunch of cases --
e.g. for the load cycle count and power-cycle count.

Also, consistently treat the raw values as unsigned.
2004-03-28 01:23:15 +00:00
wiz 4fdf521f76 It's extension, not extention. From Miod Vallat (miod at online fr). 2004-03-14 20:11:24 +00:00
jmmv b635f565e7 Homogenize usage messages: make the 'usage' word all lowercase, as this seems
to be the most common practice in our tree.
2004-01-05 23:23:32 +00:00
thorpej 683cebe2c8 No longer need to include <dev/ic/wdcreg.h> 2003-12-30 19:30:39 +00:00
thorpej a443960167 Don't need to include atavar.h 2003-12-30 19:12:35 +00:00
lha 43ac17e0cf Extend SMART status to print temperature. Add support for printing
selftest log (but no code it start selftest yet).
2003-12-20 20:03:20 +00:00
yamt 020176e538 display more capabilities for "identify" command. 2003-11-30 14:07:49 +00:00
fvdl a8930c059a Fix various uses of NULL that should have been 0. 2003-10-21 02:30:03 +00:00
agc c2a3b5ec84 Add NetBSD RCS Ids. 2003-06-23 11:53:35 +00:00
wiz 2fb4b1db52 New sentence, new line. By Robert Elz with minimal fixes. 2002-10-01 13:40:23 +00:00
mycroft 654deed34e Allow the enable command if SMART is not enabled. Duh.
Also, just blindly allow the disable command.
2002-09-13 18:31:41 +00:00
soren 1f8cf74815 Typo. 2002-08-15 19:17:04 +00:00
mycroft b916651e58 Correct the check for whether SMART is enabled. 2002-08-15 18:57:51 +00:00
soren 1cbfe6af00 Print symbolic names for SMART STATUS attributes. 2002-08-06 01:16:56 +00:00
wiz 7553d4030f Ispell. Drop .Pp before .Sh. 2002-08-06 00:44:36 +00:00