disabled by -D) from the output of newvers_stand.sh. Change -D to the
inverted logic, so that it adds the date to bootprog_rev in ().
Change all platforms accordingly. -D is added if MKREPRO is not yes and
wasn't present before. Platforms that didn't use -D don't depend on
MKREPRO now either.
options EXEC_ELF32, EXEC_SCRIPTS, and CPU_IN_CKSUM for md cpu_in_cksum.c
- make all m68k ports include common arch/m68k/conf/std.m68k
from MD std.${MACHINE}
we're ELF now, and there are many missing checks against OBJECT_FMT.
if we ever consider switching, the we can figure out what new ones
we need but for now it's just clutter.
this doesn't remove any of the support for exec_aout or any actually
required-for-boot a.out support, only the ability to build a netbsd
release in a.out format. ie, most of this code has been dead for
over a decade.
i've tested builds on vax, amd64, i386, mac68k, macppc, sparc, atari,
amiga, shark, cats, dreamcast, landisk, mmeye and x68k. this covers
the 5 MACHINE_ARCH's affected, and all the other arch code touched.
it also includes some actual run-time testing of sparc, i386 and
shark, and i performed binary comparison upon amiga and x68k as well.
some minor details relevant:
- move shlib.[ch] from ld.aout_so into ldconfig proper, and cut them
down to only the parts ldconfig needs
- remove various unused source files
- switch amiga bootblocks to using elf2bb.h instead of aout2bb.h
M680[12346] are now available from opt_m68k_arch.h. FPSP meantioned
in the PR has already been fixed, and i could not find any more.
i built these kernels to ensure i did not break their builds:
amiga: GENERIC DRACO
atari: HADES FALCON MILAN-PCIIDE
mac68k: GENERIC
sun2: GENERIC
sun3: GENERIC GENERIC3X
cesfic: attempted GENERIC, does not build due to lack of machine/bus.h
hp300: GENERIC
luna68k: GENERIC
mvme68k: GENERIC
news68k: GENERIC
next68k: GENERIC
x68k: GENERIC
M680[12346] are now available from opt_m68k_arch.h. FPSP meantioned
in the PR has already been fixed, and i could not find any more.
i built these kernels to ensure i did not break their builds:
amiga: GENERIC DRACO
atari: HADES FALCON MILAN-PCIIDE
mac68k: GENERIC
sun2: GENERIC
sun3: GENERIC GENERIC3X
cesfic: attempted GENERIC, does not build due to lack of machine/bus.h
hp300: GENERIC
luna68k: GENERIC
mvme68k: GENERIC
news68k: GENERIC
next68k: GENERIC
x68k: GENERIC
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)
i built about 20 of these kernels to check, but not all of them.
especially on RTL8019AS which is also used for non-ISA local bus of
embedded controllers and some m68k machines like atari and x68k.
* move RTL8019 probe and attach code from each bus attachment
to MI ne2000_detect() and ne2000_attach()
* change a method for backend and attachment to specify 8 bit mode
to use a new sc->sc_quirk member, instead of sc->sc_dmawidth
* handle more NE2000 8 bit mode specific settings, including
bus_space(9) access width and available size of buffer memory
* add a function to detect NE2000 8 bit mode
(disabled by default, but enalbed by options NE2000_DETECT_8BIT
to avoid possible regression on various ISA clones)
* fix ipkdb attachment accordingly (untested)
Tested on two NE2000 ISA variants (RTL8019AS and another clone named UL0001)
in both 8 bit and 16 bit mode on i386. "Looks good" from nonaka@.
See my post on tech-kern for details:
http://mail-index.NetBSD.org/tech-kern/2010/02/26/msg007423.html
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.
The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
- use SYSMAP_VA, SEGSHIFT for Sysmap address and table entries
- use TIA_SIZE, TIB_SIZE for sizes of table entries
Now page size dependent numbers are almost replaced with proper macro.
Tested on atari, hp300, and news68k.
Also explicitly set uvmexp.pagesize to prepare 8KB/page settings.
XXX: There is #ifdef !defined(amiga) && !defined(atari) workaround
XXX: because they have different pmap initialization functions.
- move macro SEGSHIFT, NBSEG, and SEGOFSET from <machine/param.h>
to <m68k/pmap_motorola.h> where they should belong
- also simplify NBSEG macro for both 020/030 and 040/060 cases
- also move m68k_trunc_seg(), m68k_round_seg(), and m68k_seg_offset()
(that use SEGOFSET) from <m68k/param.h> to <m68k/pmap_motorola.h>
- add comments about each segment size value used on pmap_motorola
implementation
- add TIA_SIZE, TIA_SHIFT, TIB_SIZE, and TIB_SHIFT macro which can be
used for ste/pte index sizes
- use proper vaddr_t cast instead of unsigned for SEGOFSET/PGOFSET macro
Tested on atari, hp300, and news68k.
