- New function change_utimes() to set access and modification times
given a vnode.
- In the function sys_chmod() and sys_fchmod(), call change_mode().
- In the function sys_utimes() and sys_futimes(), call
change_utimes().
unmounting all of the file systems. If we encounter a condition where
all of the dirty buffers could not flush, then don't unmount file systems,
since it might be likely to wedge.
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
anon cred are the same. Should probably be handled better in the mountd,
but this will do for now. Fixes PR 469, submitted Sept 1994 by
a certain "Jason R. Thorpe".. ;-)
`b_dev' value of NODEV happens and is normal if the buffer is on its way
to the underlying device strategy function for the first time.
Also, MFS sillily uses a major device number (255) which cannot be used
to index bdevsw[]. Check marked with XXXs.
call biowait() but return `success' immediately. We can return `success'
because buffers with recorded errors are not returned by getblk().
(Takes care of PR#3694).
possibly unused (with __attribute__ ((unused))), to avoid generating
warnings when compiling without optimization but with most ports' default
warning flags.
socket names:
- In unp_setsockaddr() and unp_setpeeraddr(), if the socket name can't
fit into a single mbuf, allocate enough external storage space to
hold it.
- In unp_bind() and unp_connect(), perform a similar operation, but allocate
one extra byte, and ensure that the pathname is nul-terminated.
Many thanks to enami tsugutomo <enami@cv.sony.co.jp> for the sanity
checking.
- Add a comment describing my feelings about this interface, in general.
- Remove the COMPAT_OLDSOCK length hack. Instead, if the socket argument
is too long to fit in an mbuf, allocate enough external storage to
hold it.
- If the socket argument is a sockaddr, don't allow the length to be
greater than 255, as that would overflow sa_len.
Many thanks to enami tsugutomo <enami@cv.sony.co.jp> for his sanity checking.
the format modifer. Reported by and suggested fix from Daniel G. Pouzzner
in PR #2633. Final fix is slightly different now that we support the %q
modifier. This fix also includes the equivalent fix for sprintf().
- Disallow < 1 values for SO_SNDBUF, SO_RCVBUF, SO_SNDLOWAT, and
SO_RCVLOWAT; return EINVAL if the user attempts to set <= 0.
Inspired by PR #3770, from Havard Eidnes <he@vader.runit.sintef.no>.
- For SO_SNDLOWAT and SO_RCVLOWAT, don't let the low-water mark get
set above the high-water mark. Behavior is now consistent with
BSD/OS: If such an attempt is made, silently truncate to the high-water
value.
- If RB_ASKNAME, prompt for the dump device, defaulting to
partition 'b' of the root device, if the root device is a disk.
- Else, if dumpspec is set to "none", do not configure a dump device.
- Else, if dumpspec is set by config(8), attempt to use that device.
- Else, dumpspec is wildcarded or unspecified; if the root device is
a disk, select partition b. (which was the previous default dump
partition)
Note, dumps to a local disk now work even if root is on nfs.
so that if the drop to spl0() causes another panic (e.g. because there's
still some fatal hardware interrupt that's pending) we'll know that we
dropped IPL to sync the disks.
__VM_PMAP_HACK is defined (for temporary compatibility).
The __VM_PMAP_HACK code should be removed after all the
ports that define it have removed all vm_pmap references.
fill the socket's creation time into the stat structure's st_[acm]time fields:
POSIX requires this behavior for pipe(2). N.B.: updating the st_[am]time fields
when reading/writing the pipe is neither required nor implemented, though.
(1): "substart == ex->ex_end" and "subend == ex->ex_start"
are completely legal parameters for extent_alloc_subregion()
(2): "(subend - substart) + 1" can cause an overflow if the whole
numeric range is covered by the extent.
Submitted by Matthias Drochner <drochner@zelz26.zel.kfa-juelich.de>
in PR #3119.
1) Eliminate all of the null component name special cases; handle runs of
slashes and leading and trailing slashes completely differently.
2) Return ENOENT when doing a lookup through an empty symlink.
3) Enforce that we're doing a lookup through a directory in in chdir() and
lookup() rather than in foo_lookup().
Not yet finished.
have any signals delivered while exiting, so this should be okay. Change the
test for a traced process in wait4() to exclude a process that was started by
the debugger; in this case, only one SIGCHLD should be delivered.
* When a delayed write buffer falls off the LRU queue, arrange for it to go on
the AGE queue after being flushed out to disk.
* When a delayed write buffer is synced, leave it in its relative position in
the LRU queue.
(1) "" no longer refers to the current working directory;
looking this up will now result in ENOENT.
(2) by stripping off trailing slashes and setting a `forcedir'
flag, make code such as { mkdir("dir", m); rmdir("dir/"); }
actually work.
external storage. Highlights:
- additional "void *" argument to (*ext_free)(), an opaque
cookie for use by the free function.
- MCLALLOC() and MCLFREE() calls are gone. They are replaced
by MEXTADD() (add external storage to mbuf), MEXTMALLOC()
(malloc() external storage and attach to mbuf), and
MEXTREMOVE() (remove external storage from mbuf).
- completely new external storage reference counting
mechanism; mclrefcnt[] is gone.
These changes will eventually be used to pass driver DMA buffers up
the network stack, and reduce/eliminate copies in certain code paths
(e.g. NFS writes).
From Matt Thomas <matt@3am-software.com> and myself <thorpej@nas.nasa.gov>,
with some input from Chris Demetriou <cgd@cs.cmu.edu> and review by
Charles Hannum <mycroft@mit.edu>.
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
work. Not quite as good as with the Lite2 merges, but it'll do until then.
* dounmount() expects to be called with the mountpoint marked busy
* all callers of dounmount() thus make the call themselves
* if a filesystem was being unmounted, and we're woken up in vfs_busy(),
don't reference the mountpoint struct pointer, as it has very probably
been freed.
in the assembly file genassym.s into the usual assym.h file. The
assym.h file generated this way is identical to the output generated
if I simply compile and run the genassym.s file. "Heh, Kewl!"
Thanks to Matthias Pfaller for the "translate the .s file" idea!
* prototype it before it is used (several ports compile with
-Wstrict-prototypes -Wmissing-prototypes), so this is _necessary_.
* conform to C syntax (yes, that's right, it wouldn't parse).
* make error check less error-prone, + style fixups.
mount the root file system. If the operator specified the root
file system type in the kernel configuration file, attempt to
mount that file system type on the root device. If the root
file system type was wildcarded (or unspecified), try all of
the file systems statically built into the kernel until one
succeeds. If no file systems succeed, return an error. The
system will recover from this condition.
- Implement vfs_getopsbyname(). This function returns the file
system ops vector given a file system name.
from the version used by NetBSD/alpha, with several changes by me.
Support for asking for root device and root file system type on any
kernel, obsoleting "options GENERIC".
- Make my mountroothook implementation used by the sparc and x68k
ports machine-independent, and use it here. Mountroothooks allow
devices to execute special functions before being mounted as the
root device (such as ejecting the floppy and prompting for a new
floppy disk).
- Make swapconf() machine-independent. It was identical on all ports.
- Run mountroot hooks before we attempt to mount the root device, and
destroy mountroot hooks after the root file system has been sucessfully
mounted.
- Don't panic if we can't mount root. Instead, set RB_ASKNAME and
call setroot(), which will prompt the operator for the root device
and file system type.
is running (and NTP is not enabled), the adjtime()-handling code clobbers
any tickfix that may be necessary for systems with clocks with frequency
greater than 1000Hz.
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.
* Fix arguments to various copyin()/copyout() invocations, to avoid
gratuitous casts.
* Some KNF formatting fixes
* Change sockargs()'s second argument to be a const void *, to help
with dealing with the syscall argument type fixups/const poisoning.
* change in-kernel syscall prototypes to match user-land prototypes in
the following ways:
+ add 'const' where appropriate.
+ make the following "safe" type changes where appropriate:
caddr_t -> struct msghdr *
caddr_t -> struct sockaddr *
caddr_t -> void *
char * -> void *
int -> uid_t (safe because uid_t not used as index/count)
int -> gid_t (safe because gid_t not used as index/count)
u_int -> size_t
+ change "int" to "u_long" in flags arguments to chflags() and
fchflags(). This is safe because the arguments are used as
flag bits and there's nothing that would cause the top bit
of the int to be set yet, and because the user-land definitions
already specified u_long, so a u_long's worth of argument was
already being passed in.
wrong for a bunch of functions:
void: sys_exit, sys_sync
ssize_t: sys_read, sys_write, sys_recvmsg, sys_sendmsg,
sys_recvfrom, sys_readv, sys_writev, sys_sendto
long: sys_pathconf, sys_fpathconf
void *: sys_shmat
* Note that sys_open, sys_ioctl, and sys_fcntl are defined such that their
last argument is optional.
These changes should not have any real effect, because right now this
information is not actually used for anything.
* Don't output prototypes for INDIR syscalls (since they always show up as
sys_nosys() in the syscall table).
* Add "indir" to the comment for INDIR syscalls in the syscalls table, so
it's more obvious why they call sys_nosys().
* Deal with multi-word system call return types (i.e. foo *, or
struct foo *, or struct foo, etc.).
* Add a new class of system calls "INDIR" (for "indirect"), which
is to be used to represent indirect syscalls like syscall() and
__syscall() which are implemented in MD code and which don't want
args structures defined. (The old way of declaring this type of
syscalls still works.)
* Allow system calls to be marked as having a variable number of
arguments, by inserting "..." (no trailing comma) before the
first hf the optional arguments in the syscall definition. Because
of the way syscall arguments are handled by MI code, _ALL_ syscall
arguments must actually be included in the definition, i.e.
"optional" arguments are either "are there or aren't," i.e. these
aren't really varargs functions. Therefore, for normal syscalls,
there _must_ be arguments listed after the "...". For INDIR
syscalls, which really do have a variable number of arguments and
which aren't handled via the normal mechanism, that requirement is
not in force.
* output primitive (machine-parsable) syscall descriptions as comments
in <sys/syscall.h>. These can be used to easily build real function
prototypes, or to build stub functions for use by lint.
>- Optional systems calls are "UNIMPL" if the support is not being
> compiled into the kernel.
It had implications that didn't occurr to me at the time. *sigh*
>- Optional systems calls are "UNIMPL" if the support is not being
> compiled into the kernel.
It had implications that didn't occur to me at the time. *sigh*
defined:
define match functions to take a struct cfdata * as their second
argument, config_search() to take a struct cfdata * as its second
argument, and config_{root,}search() to return struct cfdata *.
remove 'cd_indirect' cfdriver element.
remove config_scan().
remove config_make_softc() as a seperate function, reintegrating
its functionality into config_attach().
Ports will define __BROKEN_INDIRECT_CONFIG until their drivers prototypes
are updated to work with the new definitions, and until it is sure that
their indirect-config drivers do not assume that they have a softc
in their match routine.
the client and server/shared data initialization into separate functions,
and calling the server/shared initialization directly from main().
Problem noted in PR #1308 (Kenneth Stailey) and PR #1780 (Chris Demetriou).
Fix suggested in PR #1780 by Chris Demetriou, and munged a bit by me,
and OK'd by Frank van der Linden <fvdl@netbsd.org>.
(1) after removing a shutdown hook (in shutdownhook_disestablish()),
free it. We created it, we have to free it. Without this,
shutdownhook_disestablish() leaks memory.
(2) in doshutdownhooks(), before running each hook, remove it from the
shutdown hook list. This makes sure that every hook is tried once
(because doshutdownhooks() is called from before rebooting, and
a fault in a shutdown hook will cause doshutdownhooks() to be called
again), but prevents the hooks from potentially being run infinitely
(as used to be possible, in the above-mentioned situation).
If not compiled with -D_KERNEL, include different includes and
do so macro magic so that this will fit sanely into test harnesses.
When used in user-land, this should be compiled with -D_EXTENT_TESTING.
Bug fixes:
(extent_insert_and_optimize) You can't do things like:
LIST_REMOVE(elem->...le_next, ...);
free(elem->...le_next, ...);
They just don't work (and will corrupt your list and/or malloc free list).
(extent_alloc_region_descriptor) Unless you wait, malloc can fail.
Don't accidentally deref a potentially-NULL pointer.
- The functions that implement them and the argument names are
prepended with "sys_".
- Optional systems calls are "UNIMPL" if the support is not being
compiled into the kernel.
representing the names of those bits, prints them into a buffer
provided by the caller, and returns a pointer to that buffer.
Functionality is identical to that of the (non-standard) `%b' printf()
format, which will be deprecated.
Rename the non-exported function ksprintn() to ksnprintn(), and change
it to use a buffer provided by the caller, rather than at static
buffer.
* handle interpreters with nonzero virtual address of entry-point:
subtract p_vaddr from computed entrypoint, as the mips elf exec did.
* Add #ifdef ELF_INTERP_NON_RELOCATABLE/#endif around the code
that tries to choose a `good' address at which to load an interpreter,
if none was set by the emul probe function.
(the address chosen could be improved to avoid fragmenting the
process virtual address space).
* define ELF_INTERP_NON_RELOCATABLE in machine/elf_machdep.h for mips CPUs,
which currently use a GNU-derived ld.so.
ELF_INTERP_NON_RELOCATABLE is not necessary for native NetBSD/alpha ELF
binaries. It may be required for GNU-derived ELF dynamic loaders (Linux/i386?)
Keep queue of pending sockets in a double linked list. Previously,
a singly linked list was used, giving O(N) insertion/deletion times,
and was a major time consumer for sockets with large pending queues.
The double linked list give O(C) insertion/deletion times with only
a small cost in complexity.
Since a socket can be on, at most, one queue at a time, both so_q and
so_q0 can safely be used as (forward and backward, respectively) queue
pointers.
Submitted my Matt Thomas <matt@3am-software.com>, a long time ago.
(Geez, I've been running with this patch for _months_, and had completely
forgotten about it!)
struct member cn_nameptr 'const', since they should never be used to
modify the path name. (Only the pathname buffer, cn_pnbuf, should be
modified.) Propagate the const poisoning to code that uses the namei
and componentname structs.
not used by anything, for now), and implement MNT_NOCOREDUMP by checking
whether or not MNT_NOCOREDUMP is set on the file system where the dump
would land (i.e. the file system of the process's current working
directory), and disallowing the core dump if it's set.
enami