ef0ba32b7d
Regen.
1999-10-04 19:05:42 +00:00
7a8b326ba9
Add Activewire IO boards.
1999-10-04 19:05:13 +00:00
6d0137c519
Update for SCSIPI changes.
1999-09-30 23:13:41 +00:00
fb7795c908
Make sure the HC deactivation is propagated.
1999-09-18 11:25:50 +00:00
97a24aa488
Make defines follow the standard.
1999-09-16 21:53:58 +00:00
a4457e18b3
More DIAGNOSTIC paranoia.
1999-09-16 19:20:34 +00:00
09774ca21c
Remove one, add none!
1999-09-15 21:14:44 +00:00
2557320246
Handle the case when a USB transfer is so long that it crosses two page
...
(4K) boundaries. OHCI cannot do that with a single TD so we make a chain.
1999-09-15 21:14:03 +00:00
7fcc1703ff
Cosmetic change: s/xfer/data/
1999-09-15 21:12:29 +00:00
80e09c28e9
Use a bigger buffer when transferring data.
1999-09-15 21:11:27 +00:00
58c7de99c1
Move the code around a little and clearly mark how to delay attachment
...
(during cold boot) until the interrupts are on.
1999-09-15 21:10:11 +00:00
5260cadff2
Add a sanity check to the computed actual transfer length.
1999-09-15 21:08:59 +00:00
d4f0eac72e
Change SPLUSBCHECK diagnostic macro a little.
1999-09-15 21:08:19 +00:00
e54df1b10c
Handle the use_polling flag with a lttle more care and only set it if
...
we are cold booting.
1999-09-15 14:17:14 +00:00
60199e09b6
Regen.
1999-09-15 13:57:26 +00:00
df70e460db
Make vendor names more consistent.
1999-09-15 13:57:09 +00:00
adc55421b4
Regen.
1999-09-15 12:31:28 +00:00
f14a3915b3
Add a number of devices and rename a few. From a Linux web site.
1999-09-15 12:30:59 +00:00
7049e8eb1b
Add preliminary (untested) code for detaching the USB host controller
...
(needed for CardBus based controllers).
1999-09-15 10:25:30 +00:00
5486205b69
Regen.
1999-09-14 22:06:44 +00:00
ed9b74f17a
Sort out some confusion about which vendor is really Belkin.
1999-09-14 22:06:21 +00:00
c4d6d6b991
Put a reference counter in the softc. Without this the driver might access
...
data that has been freed because the detach() routine returns to early.
1999-09-13 21:35:08 +00:00
ba2c2e2ade
* Make sure an aborted pipe is marked as not running.
...
* Start queued request in the right order.
* Insert some more DIAGNOSTIC sanity checks.
1999-09-13 21:33:25 +00:00
bc5da9a8da
Make sure timeouts count as interrupt context too.
1999-09-13 19:49:41 +00:00
ff6a476e6c
Rearrange the code a little so we can decide if we are in process
...
or interrupt context in a reliable way. Mainly used for DIAGNOSTIC.
1999-09-13 19:18:17 +00:00
eadd0f76da
Add needs-flag to ukbd. Fixes PR 8385 from Izumi Tsutsui
...
<tsutsui@ceres.dti.ne.jp>.
1999-09-12 17:40:57 +00:00
b1a719a6cc
Add a flag in the request to determine if the data copying is done by the
...
driver or the usbdi layer.
1999-09-12 08:23:42 +00:00
305998532f
Dot't forget to deactivate subdevices.
1999-09-12 08:21:49 +00:00
febf7ffb86
Display more verbose information about the command protocol and wire
...
protocol used by the device, e.g.:
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Iomega USB Zip 100, rev 1.00/1.00, addr 2
umass0: SCSI over Bulk-Only (iclass 8/6/80)
1999-09-12 02:40:59 +00:00
f696794a34
Hot-unplug works now.
1999-09-11 21:45:28 +00:00
f7c20484b6
- If a command fails, assume the device returned CHECK CONDITION status,
...
and issue a REQUEST SENSE. This fixes the media change problems I was
having w/ my USB ZIP drive.
- Clean up some debugging code.
- Implement more hot-unplug stuff.
1999-09-11 20:52:07 +00:00
ca8281fbcc
Pre-allocate the DMA buffer. This makes the driver slightly more efficient.
1999-09-11 10:40:07 +00:00
98b6524413
* Move DMA buffer allocation to HC independent code.
...
* Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN.
1999-09-11 08:19:26 +00:00
90daa4736b
Comment out the GET_DEVICE_ID code, because for some unknown reason it
...
causes printing to fail sometimes.
1999-09-10 19:28:26 +00:00
6b9aae738e
Update doc URLs and fix a typo in umass_bulk_get_max_lun().
1999-09-09 17:12:03 +00:00
9bebdb616f
Remove some and add some.
1999-09-09 13:05:05 +00:00
8c655e84f2
An EXPERIMENTAL audio driver. It still needs work, e.g., in the mixer
...
part to give reasonable names to the mixer controls.
1999-09-09 12:28:25 +00:00
2aadcb5f47
Change the internal API to allow DMA buffers to be pre-allocated by
...
the device driver instead of happening automagically in the HC driver.
This affects both the HC-USBD interface as well as the USBD-device
interface.
This change will allow DMA buffers to be reused e.g. in isochronous
traffic.
Add isochronous support to the UHCI driver (not for OHCI yet).
1999-09-09 12:26:43 +00:00
977c927d44
Do a brain dump of items to do.
1999-09-07 14:58:12 +00:00
6e6d511cf0
Add USUBCLASS_MIDISTREAM definition, per request from MAEKAWA Masahide
...
<bishop@rr.iij4u.or.jp>.
1999-09-06 17:16:47 +00:00
2425433ff6
Change some printf to DPRINTF for consistency. From Nick Hibma, FreeBSD.
1999-09-05 21:22:38 +00:00
24251055bc
Change the way the `struct device' base part of all driver softc are
...
declared and accessed to make it more portable. Idea from Nick Hibma, FreeBSD.
No functional changes.
1999-09-05 19:32:18 +00:00
f3421bec94
Change the way the direction is extracted from the endpoint descriptor.
...
No functional changes to the drivers. From Nick Hibma, FreeBSD.
1999-09-04 22:26:11 +00:00
d7a4829d27
Regen.
1999-09-02 22:07:43 +00:00
1fed6ca851
Add Logitech QuickCam.
1999-09-02 22:07:29 +00:00
ba551e0c6a
Regen.
1999-09-02 19:17:57 +00:00
f6ae3ac6a9
Add some Entrega and Belkin serial adapters.
1999-09-02 19:13:43 +00:00
60179e2a13
Avoid null reference, from Nick Hibma, FreeBSD.
1999-09-02 18:13:50 +00:00
46fd81350a
Rewrite interrupt routine from clarity. From Nick Hibma, FreeBSD.
1999-09-02 18:11:41 +00:00
dea48ccdf9
Oops, back out stuff I didn't mean to commit.
1999-08-30 01:05:08 +00:00
augustss