lukem
3aeb5f2f29
whitespace police
2001-02-24 01:59:46 +00:00
minoura
8353ca15cc
Reset the mixer when resume from suspend.
...
This is required on some laptops with a buggy APM BIOS.
Code from Inoue Yoshinari <pf5y-inue@asahi-net.or.jp>.
2001-02-22 15:23:31 +00:00
jdolecek
522f569810
make some more constant arrays 'const'
2001-02-21 21:39:52 +00:00
martin
f0d6660cf4
Filename cleanup: remove i4b_ prefixes outside sys/netisdn, last round.
...
Renamed in sys/dev/ic:
i4b_hscx.c -> hscx.c
i4b_hscx.h -> hscx.h
i4b_ipac.h -> ipac.h
i4b_isac.c -> isac.c
i4b_isac.h -> isac.h
i4b_isic.c -> isic.c
i4b_isicbchan.c -> isic_bchan.c
i4b_isicl1.c -> isic_l1.c
i4b_isicl1.h -> isic_l1.h
i4b_isicl1fsm.c -> isic_l1fsm.c
2001-02-20 22:24:31 +00:00
martin
933440dc9c
Filename cleanup police (per discussion with Soren S. Jorvang):
...
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.
Renamed here:
i4b_isic_isa.c -> isic_isa.c
i4b_avm_a1.c -> isic_isa_avm_a1.c
i4b_daic_isa.c -> daic_isa.c
i4b_itk_ix1.c -> isic_isa_itk_ix1.c
i4b_tel_s08.c -> isic_isa_tel_s08.c
i4b_tel_s016.c -> isic_isa_tel_s016.c
i4b_tel_s0163.c -> isic_isa_tel_s0163.c
i4b_usr_sti.c -> isic_isa_usr_sti.c
2001-02-18 13:54:32 +00:00
martin
48501b8e83
Rename isa_isic.c to i4b_isic_isa.c and isadaic.c to i4b_daic_isa.c
...
to improve naming consistency.
2001-02-17 15:38:09 +00:00
thorpej
043e519d55
Adjust the way that media is initialized on DP8390-compatible
...
chips. The dp8390_softc now has media_init and media_fini
function pointers that do the work.
2001-02-12 18:49:03 +00:00
briggs
180bf3d3ac
Clean up a couple of printf-format warnings.
2001-02-12 15:49:19 +00:00
taca
044bcb0bd2
Insert missing '#' for cpp(1). This should close PR/12167.
2001-02-10 12:16:34 +00:00
hpeyerl
f11510dd0a
add missing Weasel command.
2001-01-23 17:18:23 +00:00
bjh21
fe3273fbb4
Patch from PR kern/8001, submitted by Rafal Boni.
...
This adds support for EtherExpress/16 cards with 16k of RAM, and in the
process adds general support for PIO mode on these cards. This entails
changing the way the i82586 driver handles bus barriers, since it doesn't
allow for strange cases like this.
This has been tested on the i386 port with the 'ix' driver in both
16KB (which was the source of the problem) and 32KB modes, as well
as with the 'ef' driver. I've tested it (briefly) with 'ei' on arm26
as well. In theory, drivers other than 'ix' should follow precisely the
same code paths as before.
2001-01-22 22:28:43 +00:00
thorpej
c38c39fc9b
Only need to pass a cy_softc * to cy_attach().
2001-01-20 02:26:39 +00:00
thorpej
a0f7017e2e
Clean up the PCI attachment a bit, and adjust the other pieces
...
to suit.
2001-01-20 02:15:01 +00:00
jdolecek
34c8ae80da
constify
2001-01-18 20:28:15 +00:00
martin
ac6176f581
Fix some oversights from fixing option names.
2001-01-09 00:46:01 +00:00
fvdl
d040bd5908
Return error in the case of using ODIOCGDINFO or ODIOCGDEFLABEL when
...
the number of partitions is > OLDMAXPARTITIONS. This is better
than silently truncating the label (don't want to silently throw
away partitions when using an old disklabel binary on a label with
> 8 partitions). From Enami Tsugutomo.
2001-01-08 02:03:45 +00:00
fvdl
e2d1c1f926
Adapt all disk devices in MI directories to handle ODIOC* calls
...
for ports that have bumped MAXPARTITIONS (and thus define
__HAVE_OLD_DISKLABEL).
2001-01-07 18:09:01 +00:00
nathanw
46b2a2fcd4
Do ess_config_addr() in the ofisa front end, rather than in the match
...
routine. Prevents problems with non-SCR ess chips, as described in
PR 11630.
2001-01-06 22:50:00 +00:00
martin
242656c78a
Enable the imported ISDN4BSD based ISDN subsystem.
...
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/ .
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
2001-01-05 13:09:15 +00:00
martin
c3cb638bca
Initial import of ISDN4BSD release 0.96
2001-01-05 12:49:52 +00:00
mycroft
a6fe4b78f2
Um, we need rnd.h so that cs_softc is defined properly. Overrunning structures
...
is bad.
NOTE: #IFDEF IN SOFTC DEFINITIONS IS BAD.
2000-12-26 09:42:21 +00:00
thorpej
e3d7d246bb
Fix a debugging clause missed when fixing full-duplex support.
...
Noted by Wolfgang Rupprecht.
2000-12-20 21:06:41 +00:00
mycroft
045091aa8f
Add a big comment in the previous section of code...
2000-12-19 06:23:26 +00:00
mycroft
463d0e577e
Back out previous change.
...
I removed this once before a long time ago, because it's wrong and breaks
PCMCIA on some machines. It also doesn't fix the Multia problems.
2000-12-19 06:04:02 +00:00
mjl
aaad4d0284
Add quirk for Avance Logic ALS100+, which doesn't like it's irq/drq
...
being set in pnp mode.
2000-12-19 01:09:15 +00:00
thorpej
57a13edc11
Use separate interrupt handlers for play and record the chip has
...
support for it and we're configured for separate play and record
DRQs. This makes full-duplex audio work on the Windows Sound System
(found in many Alpha systems).
Submitted by Juergen Weiss <weiss@uni-mainz.de> in kern/11178.
2000-12-18 21:31:32 +00:00
thorpej
7cc029e16c
Use IST_LEVEL as appropriate. Fixes PCMCIA interrupt problems
...
on the DEC Multia. From Juergen Weiss <weiss@Uni-Mainz.DE>.
2000-12-18 21:17:44 +00:00
bouyer
179157be03
Fix a reversed test.
...
Partial fix for kern/11726: now the kernel find the drives, but panics
after a device has been mounted.
2000-12-17 19:35:23 +00:00
jmc
2967c3fac3
In fdcattach() reset the controller before moving on as some probes (ala pnpbios) may not have reset during match
2000-12-17 07:37:31 +00:00
thorpej
08afcfb9bd
ALTQ'ify.
2000-12-14 06:59:01 +00:00
matt
632d2ad2ee
Don't use __hpcmips__, but hpcmips
2000-12-09 20:35:31 +00:00
matt
3f127261f3
Un __P'ed.
2000-12-06 18:57:37 +00:00
matt
1aa6c9fb10
Add prep support. change all __foo__ to foo. We don't __foo__ in the kernel
2000-11-27 21:51:02 +00:00
takemura
3c9d9276dc
Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and
...
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
2000-11-26 11:08:57 +00:00
jdolecek
c27af44fc0
Add an attachment for MOXA 168P isa multiport card. This code was
...
written by Christoph Badura.
This was reported to work by user of this code. It's not tested
by me, but it's probably more useful in tree anyway.
2000-11-20 19:24:39 +00:00
thorpej
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
thorpej
275539f03c
NBPG -> PAGE_SIZE
2000-11-14 18:21:00 +00:00
thorpej
fce3c3a6a8
pcweasel carries the sysmon_wdog attribute.
2000-11-05 04:07:30 +00:00
thorpej
95b9ab0ebc
Add a device driver for the Middle Digital, Inc. PC-Weasel serial
...
console board. This glues into the `pcdisplay' driver and provides
support for the watchdog timer function on the PC-Weasel.
2000-11-04 18:47:20 +00:00
thorpej
7575e3d5e9
Update comment regarding watchdog timer toggle.
2000-11-04 18:44:28 +00:00
thorpej
1da5a95dc5
Oops, wdt_msec is a short, not a char.
2000-10-17 00:34:41 +00:00
thorpej
4b0c3e182c
Fix a typo in an constant name that is currently unused.
2000-10-16 23:03:45 +00:00
thorpej
a5e3251d5f
Register definitions for the Middle Digital, Inc. PC-Weasel
...
serial console board.
2000-10-16 22:59:24 +00:00
simonb
5d4fa9b0ce
Revert rev 1.31 of bha.c (and associtated changes in the headers and
...
config glue files).
Fixes PR kern/9841. Tested by Tracy J. Di Marco White with a bt948
and 6 disks.
2000-10-03 14:07:36 +00:00
thorpej
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
tsutsui
f4ef578da7
6 -> ETHER_ADDR_LEN
2000-09-28 10:29:42 +00:00
itohy
572e9e2f80
Move ym_mixer_set_port() (if used) during attach AFTER initialization of
...
power ctl stuff, or it makes unwanted changes to the CODEC settings.
2000-09-04 00:57:17 +00:00
nathanw
5127aa189d
In fdioctl(), allocate fd_formb dynamically when needed, rather than on
...
the stack, and remove the no-longer-necessary PHOLD()/PRELE() calls
in fdformat().
(This eliminates 1/3 of the instances of PHOLD()/PRELE() in the kernel code.)
XXX We still have too many mostly-redundant floppy drivers.
2000-08-24 20:04:28 +00:00
thorpej
f80d70f19a
Just add the mmap argument to vga_common_attach(), don't bother
...
with vga_extended_attach().
2000-08-14 20:14:50 +00:00
thorpej
8cb7deb85b
Add support for the DEC DE422 Ethernet, which is a DEPCA
...
attached to the EISA bus. This board is commonly found
on Alpha Jensen systems.
2000-08-11 02:27:07 +00:00